This report analyzes and examines a hypothesis for finding a method to optimize thelength of the delubrication process time based on a total charge weight. The work hasfocused on the holding time for delubrication and the total charge weight.An important step in the manufacturing chain of cutting tools is when the greenbodies undergo the sintering process. Today, the delubrication step has the sameprocess time independent of the total charge weight. An implementation of a methodto adjust the delubrication process time would give more consistent quality of thecutting tool´s internal characteristics but also reduce the time course of the sinteringprocess. In the present project two methods for this goal were tested, thedevelopment of an algorithm and a weight interval subdivision with associateddelubrication process times.During delubrication a pressure increase is observed due to the decomposition of thePEG in the powder mixture.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

Background:Life-cycle costing (LCC) is an investment calculation that takes intoaccount operating costs throughout the investee lifecycle. LCC calculations are mainly usedto evaluate investments that have no revenue side. Attempts to apply the LCC calculations forbuilding-related investments have occurred since the 1980s. Despite the advantages ofusing LCC calculations, use has not passed through in full. The main obstacles have beenidentified as a lack of relevant input data, and insufficient experience of workingwith LCC calculations.

The examination is focusing on the person who is working in the supervising position in a company. Two different case studies performed with qualitative interviews. One case study is in the service industry and the other case study is in the manufacture industry. The aim with this study is to bring greater understanding to the eventual problems of identity that a supervisor canexperience because of his/her working position boarder between groups. This considering three roles of the supervisor; one role as asupervisor, one role as a colleague and one role as a friend.

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The final stage of a designers work is always a bit tricky. Design is an abstract phenomenon and no one can tell when a design is really finished. The design process that designers work within has been thoroughly studied but cannot be truly mapped with strict constraints which the designer can follow to succeed. Therefore, in this paper we take a look at the final stage in the design process. The main goal is to get more knowledge and highlight key factors about what designers face when they are about finish their design or what forces them to leave a project that can stay in development for eternity.

Each student in elementary school will under current policy documents have an individual development plan (IEP) from 1 January 2006. The plan should primarily aim for a higher goal achievement, but also to the student to gain a greater understanding of their own learning process and knowledge. My experience is that some students, despite efforts IUP have difficulty seeing their own learning process and it has been the starting point of my study. The aim of the study has been to investigate and analyze teachers work with individual development plans from the first grade to the sixth grade from a teacher's perspective. The goal was to identify strategies and techniques that could help develop IUP as a tool for the student's learning and understanding of their own learning process.

The thesis deals with evaluation of tenders for communal construction procurement. Each year the public procurement equals the value of millions of Swedish kronors, of which construction projects makes up a large proportion. These projects tend to often exceed their budgets. The aim with the thesis is to investigate if there are faults in the tender evaluation process. The theoretical framework for the study partly consists of a review on how the communal evaluation work is described in law and practice.

Background: The growth of the venture capital industry has given birth to new relations between investors and entrepreneurial firms. Venture capital firms are by definition investors serving as an active partner which implies a deeper relation between investors and entrepreneurs than has been the case previously. This new situation leads to a number of questions. Do venture capitalists really act as active partners with a long term interest in the venture? Do they add any value besides capital? How important is their influence in the portfolio company's decision making process? Purpose: The purpose of this study is to give a deeper understanding of the relation between venture capital firms and IT companies in the start-up phase.

General concerns about environmental issues may mean that the demand for bio-based products will increase. Opportunities that arise on markets, together with the declining demand for newsprint, may trigger firms in the Swedish forest industry to increase their development of new products. One product that has received a lot of attention during recent years (and is a contender) is nanocellulose. The purpose of this master thesis was to examine the Swedish forest industry?s view on the market potential of nanocellulose.

The forest industry is anonymous among the young people of today. Many youngsters do not know what the forest industry has to offer. As a result of this, many schools and forest have a weak recruitment. This is not a problem for Sweden and the forest industry only, many other businesses companies suffer from in Sweden and other countries in Europe share the same image problem. The interest and values of young people drives them to look for opportunities in other betterknown sectors with better image and reputation. Many companies report having problems with recruiting the best and right employees and fear that the recruiting-problems will increase when the older generation born in the 1940?s will retire.

This dissertation is carried out on behalf of Two i Sverige AB. Two is a consulting agency which primarily works with the development of homepages. The company has several of its complete applications written in ASP e.g. the development of homepages. At the agency they have seen benefit migrating these applications from ASP to the more flexible environment ASP.NET.

By studying literature concerning design, didactics and reflection, and complementing those explorations with interviews with experienced design educators, this thesis challenges the idea of aesthetic media education being purely aesthetic in its characteristics. Drawing from their own experiences as a media aesthetics educator and an industrial designer, the two authors argue that the work flow used within most fields of design, commonly known as the design process, might provide a suitable didactic alternative to a field of education lacking relevant methodology. The literature study offers a better understanding of the design process and how it may be defined and viewed within an educational context. The interviews provide a more practical insight into the world of design education. The result shows that the design process as a didactical method theoretically offers both elements of critical thinking as well as direction and frames for students lacking aesthetic and artistic experience.