This essay is about the engineer platoon. The engineer platoon has many different tasks and from my own experience sometimes too many. The platoon is able to build bridges, clear mines and to perform all kinds of construction work in rural or in urban terrain.In this case study I compare goals/demands for the battalion to goal?s set up for the company and finally what effects this has on the engineer platoons abilities. The main question is, if the engineer platoon really can solve all tasks given to them in the document TOEM? Abilities such as effect, protection and movement are the bearing parts of the case study.The materials I have analyzed are mostly from documents published by The Swedish Armed Forces.

This project investigates the cooperation between architect and engineer. The context of the investigation is the design of buildings for a sustainable society. The goal of the project is to further the development of the sustainable built society by increasing the knowledge of the interdisciplinary cooperation between these two fields. The focus is a close cooperation already from the start of a project. By involving both fields in the early design stages it is thought that the knowledge and skills of each field is better utilized.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This paper describes the Swedish reconnaissance squads in the engineer battalions, their equipment, tasks and organization. An analysis is made to compare the present weapons and fire power of the reconnaissance squad with an extended weapon alternative. The analysis focuses on the abilities effect, protection and movement in different situations typical of a reconnaissance squad.The facts that are presented in this paper are mostly founded on the new field manual FältarbR Dyktjänst 2007, which regulates much of the reconnaissance activities. The aim of this paper is the making of a contribution in the developing progress of the new field manual and the reconnaissance squads in Swedish engineer battalions.The result of the analysis shows that the extended weapon alternative would be an asset..

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

This report is the result of a thesis as been implemented during the spring term 2009 atthe University of Gävle.The company Bruks produces mobile chippers which are used for chipping loggingslash, roundwood and parts of trees. The chipper is powered by a separate diesel engineand the chipper can be assembled on trucks, trailers or some other carrier vehicles.When the chip has passed the chipper drum, the chip is collected in an integrated binwhich is mounted on the vehicles frame with dumping yokes. When these dumpingyokes were designed they were probably created with large material dimensions. Theaim with the degree project is hence to study the strengths of materials and, if possible,to suggest an arrangement that can decrease the total weight on the dumping yoke onBruks´ mobile chippers 805 CT.The CAD-program Pro/ENGINEER was used during the project for outlining the 2Ddrawings,as distributed of constructors on Bruks, to solid 3D-parts. The three-dimensionalassembly from Pro/ENGINEER was transferred to Pro/MECHANICA.

The degree project is performed at Metso Kamfab. The production is aimed on machines everything from handling of fiber to paper pulp. Metso Fiber and Kamfab are using Pro/Engineer for design and blueprint production. The processing department types the NC-programs in notepad on the basis of the blueprints, the CAD-dates that already is there are not used. The aim with the work is to study if Kamfab can use CAM-system for processing and production of programs for their NC-machines.

This work has been done by three development engineers and one computer engineer and in some cooperation with the company Phoniro. This report is written for computer science and is mainly oriented on the programming part in the project. The goal has been to develop a program that ensures the quality of the care that the home care organization delivers. The program is developed for cellphones and is supposed to be used in every visit. Several functions have been developed for the reason of reducing mistakes in patient visits, where the focus was on safe medication.

Urban operations is one of the most difficult challenges a modern army can be tasked with. These challenges have been studied in history and present with various perspectives, but rarely from a combat engineering point of view. The purpose of this thesis has been to study the urban capabilities of a Swedish combat engineer company by examining if it can perform similar combat engineering fieldwork that supported the basic capabilities mobility, defence and effect in Operation AL FAJR, Fallujah Iraq 2004. These are the capabilities a Swedish engineer company are primarily designed to support in urban operations.For example, the study of Operation AL FAJR has shown that fieldwork supported mobility with breaching minefields, obstacles, walls and doors. Defence by creating defensive positions and obstacles.

This report is the result of a thesis performed at Westermo Industrial Ltd with its headquarters in Stora Sundby and it sums up the author's studies for University Engineering in Innovation, Production and Logistics at Mälardalen University.The main goal of the thesis was to identify problems and suggest actions that lead to the reduction of the repair time from 3 weeks to 2 weeks. The key questions that were answered in order to achieve the thesis objectives are: What are the biggest challenges that make the repair process time last for 3 weeks? What are the necessary means and measures in order to reduce the repair length to 2 weeks? The author adjusted the work to the Swedish repairs, repair issues that arise from sell unit Westermo Data Communications AB with its office in Västerås and performed the status report by mapping the repair process, through using observations, interviews and bibliography research studies. A flow map of four sub-processes (Inbound Delivery, BackOffice, Repair Department, and Logistics) was made and each section was observed, where also the employees were interviewed. Data that has been collected was analysed by the author and the decision to execute a workshop that affects Repair Department and Logistics was made.

This Master?s Thesis work was performed at the Studio Engineer department at Volvo CarsDesign Centre in Gothenburg, Sweden. The assignment has been to create a new idea of an airvent where the news value mainly was focused at functionality but also with great attention onvisual appearance.The work has been totally independent and not been aimed to any specific car model. Theindependency initially made that the visual appearance primary wasn?t limited in any way dueto surrounding components.

Denna uppsats skrivs som examensarbete under sista terminen på officersprogrammet på Försvarshögskolan. Uppsatsens syfte har varit att undersöka om det finns någon skillnad i hur fältarbetsförmågan används i en nationell insats i Sverige och i en internationell insats i Afghanistan och om det finns några slutsatser att dra om eventuell skillnad. Genomgående i uppsatsen har de fyra inriktningarna; fältarbeten för rörlighet, fördröjandefältarbeten, fältarbeten för överlevnad och övriga fältarbeten används för att förklara fältarbetsförmågan. De resultat som visade sig efter jämförelsen var att det finns ett litet behov av broresurser och fördröjande fältarbeten i Afghanistan jämfört med Sverige. De dragna slutsatserna är att fältarbetsförmågans storlek i Afghanistan är beroende av den totala insatsens storlek.

Engineers are a group of individuals who are attractive when companies are in need for competence in technology. Today it is a shortage of these competences in the labor market. Because of this there has grown a competition among companies when they strive to recruit the best engineers. Therefore companies spend more resources on marketing themselves as an attractive employer. This study was set out to find what engineers think is an attractive employer through a demographic perspective.

This report describes the development process of a pipe clamp used on exhaust system for cars. It is made based on the manufacturers desire to improve and make the clamp easier to manufacture and to reduce its price to their customers. This should be done either by manufacturing the clamp in one piece without an expensive and work intensive welding process, or by generating ideas of how to develop a brand new type of clamp. Investigating the market for similar products was done to eliminate intrusion of other manufacturers? patents but also to generate ideas.

Målet med detta examensarbete är att ersätta den tidigare lösningen av sensorfingret med andra komponenter, eller hitta en annan sensor med motsvarande funktion.Arbetet har begränsats av att ESAB vill ha ett mekaniskt finger för användarvänlighetens skull. Efter en förundersökning av olika typer av sensorer har vi valt att använda oss av trådtöjningsgivare som sensorer till det mekaniska sensorfingret. I och med detta val behövde vi även komma med ett teoretiskt förslag på en mekanisk upphängning av sensorfingret.Vi har byggt upp två separata Wheatstonebryggor med varsin instrumentförstärkare (INA125). Utsignalen från bryggorna är relativt liten och behövde förstärkas cirka 2000 gånger.Nollbalansering av bryggorna har skett manuellt med potentiometrar men vi har även gett ett förslag på en lösning där nollbalansering kan ske med ett enkelt knapptryck. Knappen är placerad på upphängningen på ett sådant sätt att man inte kan trycka oavsiktligt på knappen.Resultatet av arbetet är en uppkoppling på en experimentplatta samt förslag på hur upphängningen och sensorfingret designmässigt kan se ut.För vidare arbetsgång behövs en prototyp för att testa livslängden och ta reda på vilken känslighet som är mest optimal..