Purpose: The purpose of this study has been to identify different actors and processes in music recording. We find this interesting since there have been a lot of changes in the music industry over the last years. Our ambition has been to point out different actors and their roles during the advent of recorded music, and identify different features and processes in the creation of music today and in the future. To fulfill our purpose we have had the following research question: What characterize, in a future perspective, the gathered process during the creation of recorded music from idea to delivery and experience?Method: We have used a qualitative approach for this study and we have conducted seven interviews with persons from different areas of the Music Industry and radio.

This master thesis is intended to give an increased understanding of the stress state in an axle, which is assembled in one of Atlas Copco?s mountain drilling rigs. The main problems investigated were how the axle is affected when the bearing is worn, when the pretension is varied, and how to dimension the axle. Answers to these questions were found by using hand calculations, practical testing and with Finite Element analyzes. The dimensioning of the axle is currently based on the bending stress, but the author?s opinion is that the axle should be dimensioned considering the equivalent stress.

Sammanfattning Syfte Syftet med vår uppsats är att studera vilka faktorer i interaktionen mellan personalen och dess kunder som är nöjdhetsskapande i tjänsteföretag som präglas av; ? Begränsad påverkansmöjlighet på slutprodukt, exempelvis nätverksorganisationer med många ´ inblandade aktörer, ? Få och/eller sporadiska kundkontakter, exempelvis till följd av ett ökat utnyttjande av teknologi och självbetjäning. Utifrån detta ska vi konstruera en egen Kundnöjdhets-skapande interaktionsmodell och jämföra den med befintliga nöjdhetsskapande modeller. Metod Som metod för insamling av vårt empiriska material använder vi oss av Nöjdhetsskapande Handlings-Metod. Det empiriska underlag som ligger till grund för denna uppsats är uteslutande resenärernas egna berättelser om nöjdhetsskapande handlingar vid interaktionsutbyte med tågpersonalen på Kustpilen. Slutsats Att interaktionen, mötet mellan leverantörens personal och dess kunder, är betydelsefull för kundernas tillfredsställelse är inget nytt.

Milk and milk consumption has been subject of discussion for a long time, and is still a hot topic. Recently, as study was published that observed a correlation between milk intake and increased risk of fractures and mortality. The authors proposed the milk?s content of D-galactose as the possible mechanism, since D-galactose is used indicated ageing in animal models. Therefore, this study aims to develop a method to determine the amount of galactose, glucose and lactose in milk and fermented milk and apply it on to dairy products on the Swedish market.

Detta examensarbete handlar om förebilders och idolers påverkan när det gäller val av instrument och musik, med fokus på elgitarren, samt vilka andra drivkrafter som påverkar detta. Syftet med arbetet är att få kunskap om olika drivkrafter som påverkar viljan att spela ett instrument. Teoretisk utgångspunkt för studien är den sociokulturella teorin. Tidigare forskning inom området behandlar exempelvis sociala normer, förebilders påverkan på människor samt ramfaktorer inom undervisning. Jag har använt mig av den kvalitativa forskningsintervjun som metod, och mina informanter är elgitarrister med varierande ålder och musikalisk bakgrund.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

The purpose is to improve IKEA´s understanding of how their target group of 12 to 18 years old boys and girls thinks when they visit the showrooms in the department stores. What make them enter the showrooms? Is it the colours, the furniture or the whole concept? How are they inspired to furnish their own room? Do they get ideas from the showrooms or are they looking for a specific furniture? These types of questions have increased young people´s interest for design and decoration over the last decade. It transpires with help from an article written by Vittorio Girotto and Michel Gonzalez how children are influenced in an early age by their own temperament and their natural surroundings. Children reasons and acts according to what they believe adults would have done in a similar situation.The methods that have been used during this project are interviews, surveys, observations, hypothetical persona, persona and ABL (IKEA´s own method).

This study investigates the potential of a rhetorical theory of knowledge to expand beyond its own domain and into political theory, specifically theories of deliberative democracy. Despite the increasing interest in communication in democratic theory in the last decades, the majority of theorists have not turned their interest towards rhetorical science. On the contrary, theorists often regard rhetoric as dangerous and incompatible with the deliberative ideal of reason. The aim of this study is therefore to defend rhetorical science by investigating how the rhetorical theory of knowledge ? as it is presented by Chaïm Perelman and Oldbrecht Tyteca, and further developed by Mats Rosengren and Maria Wolrath Söderberg ? can contribute to the understanding of deliberative democracy.

This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

7 % of children in preschool have some sort of language disorder. How should preschool teachers best help these children? In a small special group where they can focus on the child´s individual linguistic development or in an ordinary group were the other children can be linguistic models for the child and help his or hers development?The purpose of this paper is to see what preschool teachers, who work with children who has language impairment, says about working with these children in a special group as compared with working with them in an ordinary group together with children without language impairment. What are the advantages and the disadvantages related to the different ways of working? Another focus point is how the children collaborate with each other.

This essay in economic geography describes what intra-firm trade as a concept is and different ways to determine in which cases trade is to be labeled as intra-firm trade (IFT) or not. The method used by the author is most easily described as descriptive. This method was chosen in order to test if existing theories; classic and neoclassic economics, new trade theory and international business studies, are capable to explain the phenomena of IFT. The theories are tested trough primary and secondary literature but also trough reasoning by the author.The conclusion is that the most reasonable way to determine whether trade occurs intra-firm or not, is to decide upon a 5-% rule where it when one part owns 5-% of the voting strength in the other company is to be considered intra-firm trade. This is a conclusion based on several reasons; the strongest one being that a common view on IFT could boost comparative studies as the U.S already collects data based on the 5-% rule.Classic and neoclassic economics are incapable of explaining IFT as aprerequisite for these theories is that markets are perfect.

AbstractOne of the most common business models for agriculture is according to Lantbrukarnas Riksförbund (2010) that two or more agricultural companies merge and form a company together. To create strong owners and to be competitive there is a recognized need to create relationships between small firms according to Mazzarol , Mamouni Limnios and Reboud (2013). Oerleman and Assouline (2004) argues that it is possible to achieve success in agriculture by following certain strategic priorities.This paper examines why farmers choose to venture into collaboration and whether cooperation are linked to the strategies of the company. The paper also discusses the pros and cons of partnerships in agriculture. A qualitative comparative research design has been used to answer to the topics and we have interviewed respondents from four different agriculture companies, which have been active in some form of cooperation or collaboration.

This study deals with the Swedish public library in our changeable time. New technology, an altered media situation with a growing digitalization, globalization and a society focusing on the individual and the market have put the public library in a new, indistinct position. It is described as facing an identity crisis. The aim of this thesis is to, by interviewing a group of young people ages 15-16, find out what the public library is for this user group and what it ought to be according to them. How do they value the services provided by the public library? Are there services they miss? The thesis also aims at relating the opinions of the young people to earlier research.

Examensarbetet använder generaliserade linjära modeller för att identifiera och analysera enhetsspecifika egenskaper som påverkar risken för operativa förluster. Företag exponeras sällan mot operativa förluster vilket gör att det finns lite information om dessa förluster. De generaliserade linjära modellerna använder statistiska metoder som gör det möjligt att analysera all tillgänglig interndata trots att den är begränsad. Dessutom möjliggör metoden att analysera frekvensen av förlusterna samt magnituden av förlusterna var för sig. Det är fördelaktigt att göra två separata analyser, oberoende av varandra, för att identifiera vilka enhetsspecifika egenskaper som påverkar förlustfrekvensen respektive förlustmagnituden.

The purpose of this master?s thesis is to contribute to the development of business relationships between a supplier and its customers. The research area and research problem was further developed into three research questions. The research questions concerns the following subjects: the substance of business relationships and dimensions within relationships management that can be used in order to contribute to the development of a company?s business relationships.