The thesis is about exploring possibilities for developing a standardised system solution for micro businesses, this since most of the micro business lack proper system solutions, a contributing factor of this is price and also incompatibility between the solution and the business itself. The system solutions we will refer to are solutions which task is to cover the most important needs that a micro business might have on their system. The main goal with this research is to see if this is possible, and if so, how the developers should think to take it further. We chose to do this by identifying the most significant of needs a micro business has when it comes to this type of system solution.In this thesis we will present three needs which were evaluated and brought forth through the analyses of various interviews and observations we had done during the study. The interviews took place at respective company with their employees and consisted both closed and open questions with our main focus on the open questions because we wanted to obtain as much information from the respondents as possible from several viewpoints.

The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

Background: For the knowledge company the employees? competencies and knowledge are important assets. According to this, there has been a lot discussion about how to best take advantage of the employees? knowledge and create organizational learning. This organizational learning can be difficult to create due to the individuals? own goals and the fast changes in today?s society.

The aim of this study was to determine which type of fluid to use in trauma care to improve patient survival. The method used was a systematic review, where a total of 18 studies were reviewed and 13 included in the results. The inclusion criteria used in this study were Randomized controlled trial, or studies relevant for the purpose, written in English and published during the last ten years. The studies were identified in the PubMed data base. The results showed that in trauma with hypovolaemia, colloid infusion has a better effect than infusion of crystalloid fluid on blood pressure and colloid infusion reduced the body's cascade systems in a beneficial way. Colloid infusion administered to head injury patients lowered their intracranial pressure more than crystalloid infusion.

The following thesis is examining compliance with EU-law from a member state perspective. The variation in the compliance level between the member states from 1995 to 2005 is analyzed to prove the fact that the Nordic member countries during the measured time period experienced a low number of infringements. The infringements that did occur were resolved faster and more efficient in the Nordic countries then in the other member states. The theory used to explain the Nordic compliance rate is divided between external and internal pressure in a pull and push model. The external pressure is illustrated with argumentative persuasion from the EU-commission to the individual member states; how the state responds to the persuasion in order to act compliant.

As the Swedish governments long term goals include a reduction of fossil fuel dependency, increasing pressure is placed upon energy companies to create and develop new solutions for renewable energy. The following case study was done in collaboration with the company Sydved Energileveranser AB and one of their contractors, Enarssons Skogsentreprenad AB. The objective of the study is to examine the bioenergy situation in region of Skåne and evaluate the potential solutions in the region for a forest-fuel assortment, based on a bioenergy-cutting-system. As a part of this study I have compared ordinary manual cuttings done with a chain saw and cuttings made using the new ?bio- energy cutting system?. The cuttings made under both systems were tested in areas near agricultural fields or pasture land in order to maintain an open landscape.

The purpose of this master thesis was to study the water system for mechanically cleaned water at Skärblacka mill, in order to find and evaluate possibilities of using energy more efficiently. The thesis also includes an evaluation of the software tool ?Pumpanalys?Skärblacka mill produces pulp and paper. The large amount of water required is cleaned mechanically through filters and called mechanically cleaned water (MR0). The MR0 water is pumped out to the factory by four crude water pumps.

Energy is an essential part of the society and for a sustainable future we need to use the energy resources in a sustainable way. The forest is Sweden?s most important resource for renewable energy and a higher production combined with shorter rotation periods (time from planting to clear cutting) can increase the access to energy. The tree genus poplar (Populus spp.) is interesting as energy resource as it has both high production and short rotation period. But browsing ungulates are a major threat to the establishment of poplar plants and therefore the poplar plantations need to be fenced in today. To use fences is expensive and time consuming; this makes it interesting to find more cost-effective solutions where there is no need to fence. The aim with this study was to look at the ungulates? occupation rate and browsing pressure in poplar plantations without fence.

The purpose of this thesis is to gain a deeper understanding about why Swedish banks choose to work and report CSR and also analyze differences and similarities between two banks.Research question: Why do Swedish companies within the financial sector choose to report and work with Corporate Social Responsibility?The major incentives to work and report CSR are because it benefits bank´s businesses, which is driven by stakeholders. Stakeholder pressure is also an important incentive, especially pressure from customers and employees. The incentives that differed between the two banks were morality of the business leader, society and the priority of stakeholders. The incentives that we could not support were guidelines and competitors-.

This thesis is performed in cooperation with Prodelox AB and JTI (Swedish Institute of Agricultural and Environmental Engineering). The purpose of the project is to generate and develop a WC-technique with a closet sewer that keeps a higher TS-substance than 1.5 %. The WC-technique is mainly directed towards permanent households in sparsely-populated areas and cabins. The goal is to generate concepts of toilets with an extremely low use of water in terms of flushing. The design should be appealing and touch more senses than only the visual.

This thesis has been carried out in cooperation with a company which develops mobile sensor platforms. The sensors measure different types of data such as temperature, pressure etc.. They will communicate through the internet with a server that stores data in a database. This system will be controlled and monitored through a web page. The project's aim has been to develop this system and to implement a server, a database, a website and a client application that simulates sensor signals.

The aim of the thesis is to analyse and understand resolution, repeatability and reproducibility of the measurement system for package distance. The measurement system for package distance is already in use, no Gage R&R has been performed on the system and before spreading use of the system the quality of the system has to be understood and approved.

Background: Peripheral arterial disease (PAD), as a consequence of atherosclerosis in the arteria of the limbs, affects one of ten Swedes older than 65. PAD can develop slowly and silently, and involves an increased risk for cardiac infarction and stroke. Measurement of the patient´s ankle blood pressure and calculation of the ankle-brachial index is an evidence-based method to discover PAD. Objective: To investigate how district nurses and general practitioners perceive this method of examination and experience possible obstacles to why it is not more commonly applied at primary health care centres. Method: Data collected by semi-structured interviews have been processed by qualitative content analysis with a manifest onset.

Modern air battles are very dynamic and fast, and put extreme pressure on pilots. In some unpredictable situations, like new discovered threats or mission plan deviation because of enemy aircraft, the pilots might need to replan their predefined flight route. This is very difficult, if not impossible, to do since numerous factors affect it. A system that can help the pilots to do such a thing is needed. Previous work in this field has involved methods from artificial intelligence like A*-search.