The purpose of this master thesis is to evaluate how internal vehicle information inScania buses and trucks can be used for evaluation of driver performance regardingfuel economy, vehicle wear, traffic safety, emissions and cargo damage. To someextent it was examined whether this information could be used for training the driverto a better driving style. In addition, a prototype for such a system was developed.By first defining what distinguishes a talented driver and how he/she differs from apoor driver, followed by a study of the internal vehicle communication, a system thatin real-time gathers and interprets vehicle data could be developed.The resulting system can with reasonably high reliability detect a number of trafficevents (such as braking, lane changing or hilltops). At each such event, the driver?sbehaviour can be evaluated.

Syftet med denna systematiska litteraturstudie var att ta reda på vilka mätinstrument som används för att identifiera patienter med risk att utveckla trycksår samt beskriva vilka omvårdnadsåtgärder som har betydelse för trycksårsprevention och sårläkning. De vetenskapliga artiklarna (n=16) som ingick i denna studie söktes i databasen Elin@dalarna. Sökorden som användes var pressure ulcer i olika kombinationer med nutrition, activity, skin, Norton, treatment och hydrocolloid. Inklusionskriterierna var att artiklarna skulle vara publicerade mellan åren 1999-2006 och vara i fulltext samt svensk och/eller engelskspråkig. Resultatet visade att patienter borde riskbedömas för trycksår så snart som möjligt efter att de anlänt till vårdinrättningen.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

Problemställning: Det existerar idag en betydande forskning som berör digitala system för kunskapsöverföring. Emellertid ser vi en tydlig brist i forskningen kring användandet av de olika systemen. Detta beror till stor del på problemet med att kunna mäta att en medarbetare verkligen använder systemet för kunskapsöverföring. Genom att studera kunskapsutbytet i organisationerna hade det varit möjligt att kartlägga de områden som påverkar användningen av digitala system för kunskapsöverföring. Frågeställning: Vilka faktorer påverkar användningen av digitala system för kunskapsöverföring? Syfte: Syftet är att skapa en modell som visar de faktorer som påverkar användningen av digitala system för kunskapsöverföring, samt att genomföra en första prövning av modellens giltighet genom en studie av tre företag.

Kraven på dagens trådlösa förbindelser kommer hela tiden att öka och med detta följer även högre krav på nya produkter som kan tillgodose de ökade kraven. För att göra processen från idé till produkt snabbare krävs enkla verktyg för att snabbt kunna gå från den formulerade standarden till en hårdvaruprototyp. Detta arbete har använt sig av ett av dessa verktyg som idag finns tillgängliga, Xilinx System Generator for DSP 1.1, för att ta fram sändare och mottagare för en del av den trådlösa standarden IEEE 802.11a. Arbetet ger en beskrivning av hur sändare och mottagare är uppbyggda samt även synpunkter på System Generator och beskrivningar av problem som uppstod under arbetet.

Deontic Action Logic Multi Agent System (DALMAS) är en typ avmultiagentsystem där agenternas handlingar regleras av ett normativt system. Teorinför DALMAS bygger på deontisk logik, och normer i det normativa systemetuttrycks i termer av Kanger-Lindahls teori om normativa positioner. Syftet meddetta arbete är att försöka reda ut vilka eventuella fördelar ett normativt system kange samt hur man ska kunna skapa effektivt sådant. Går det att skapa ett normsystemsom kan lösa samma problem som ett konventionellt MAS löser? För att kunnajämföra de olika normsystemen har kriterier för hög effektivitet tagits fram.Testresultaten visar bl.a.

Migration mellan system används oftast när ett system har blivit föråldrat och då det märks att det inte längre är lika effektivt gentemot nyfunnen teknik. Då är det därför intressant att använda sig av migration, när det är av intresse att skapa ett nyare system utifrån det gamla. Detta arbete går igenom och löser problem vilka uppstått när en migration mellan ett dokumenthanteringssystem till en webbapplikation görs. Men fokuseringen har riktats mot att hitta den bästa migrations och övergångsmetoden för att kunna skapa en bra, enkel och effektiv migration mellan ett dokumenthanteringssystem till en webbapplikation.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

This project is about development of virtual drums for iPhone and iPad. The project aims to provide the company Toontrack AB with a good foundation to build drumbased apps. The focus has been on getting a quick response when playing and that user interfaces should be easy to use, intuitive and customizable. The result is impressive and both audio and graphics are of excellent quality thanks to good collaboration with Toontrack, that previously has developed drum-based software. The drum kit offers a variety of articulations and even the ability to play various dynamics, although the screens are not pressure sensitive..

Vi har utvecklat ett tidregistrerings- och faktureringssystem åt Xeratech Systems AB i Karlstad. Målet med vårt arbete var att utveckla ett system som var mer användarvänligt och mer funktionsenligt än Xeratechs gamla system - XSIS. Huvudfunktionen med systemet är att kunna registrera tider som anställda på Xeratech arbetat på olika projekt, vilket sedan ska kunna sammanställas till fakturor. Vi har skrivit en kravspecifikation för systemet efter diskussion med Xeratech, och sedan implementerat tidregistreringsdelen av specifikationen. Resultatet av vårt arbete är ett väl fungerande system som fått positiv respons vid testkörning hos Xeratech.

Students at the School of Engineering at Jönköping University have on behalf of the swimming organization ?Nässjö Sim och Livräddningssällskap? conducted research on how to monitor and evaluate swimmers and swimming groups in a simple and efficient manner with a focus on usability and user friendliness. Since no system existed that could meet these requirements, the client had a desire to tailor and develop such a system. The purpose of this work was to develop a system that would work as a tool to be used by coaches and swimmers alike and allow them to eventually follow the development of swimmers and swimming groups. The organization also wanted to have the ability to create tests and exams, both for land and water training, register these in the system and in a structured way know which swimmers took and passed these.For this thesis, the following questions functioned as a framework for progress.UsabilityHow to design a usable system and what is required?SystemWhat type of system is best suited to meet the client's requirements and preferences?Competition resultsHow can one retrieve all the competition results for swimmers of Nässjö SLS?DatabaseWhat type of database is best suited to easily share data with an external existing database?Usability has been the main focus throughout the project.

The purpose of this study was to examine work related stressors and related coping strategies among case managers at a domestic violence shelter in the United States. We further wanted to examine whether locus of control among the participants could be related to work related stress and coping strategies. Qualitative interviews were performed with eight case managers to gain knowledge about the stressors and coping strategies they used by examining their thoughts, feelings and experiences. The result showed that the case managers experience a number of stressors in their work environment such as system problems (e.g., lack of re¬sources and time pressure) and emotional stress. Coping responses among the case managers included efforts to alter the problem, so called problem focused coping, efforts to control emo¬tions, so called emotions focused coping and social support from colleagues.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.