ABSTRACTPressure ulcers are a serious health damage that causes great suffering, prolonged hospital stays and increased health care costs. Patients undergoing surgery are at high risk of developing pressure ulcers and it is the operating theatre nurse responsibility to protect against health damage through nursing. There are little research made in the area of perioperative pressure ulcer prevention. In order to investigate perioperative pressure ulcer preventive care measures that are described in the litterature and to answer the question how the operating theater nurse can protect the patient, a pilot study of a systematic literature review was carried out. Data base searches were conducted in PubMed and Cinahl from where ten articles were selected and examined for their quality and content.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

Background: A health damage that has been specifically related to nursing is pressure ulcers. Pressure ulcers are a complication caused by disease, care and treatment and can result in great suffering for the patient. Pressure ulcers can affect people both physically and psychosocially and is experienced, by most patients, as a serious and unnecessary complication of care. Today there are hundreds of identified risk factors for pressure ulcers described that can be divided into patient and care-related risk factors. A successful pressure ulcer prevention and treatment is to reduce or eliminate the underlying causes for the development of pressure ulcers, prevent deterioration and to treat existing ulcers.

The aim of this study was to in laboratory experiments investigate how addition of urea, ECOX and structural materials can optimize sanitization during composting of sewage sludge. Today we strive for a sustainable society and the importance of closing the nutrient loop increases. It has therefore become even more important to safely reuse plant nutrients from human excreta to agricultural land. Partly because it increases the sustainability of society as the world's supply of many nutrients are finite, partly because it promotes human health, both by reducing disease transmission and by increasing Agricultural production. An untapped resource such as sewage sludge that is rich in nutrients and humus-forming materials could replace parts of the commercial fertilizers used in Sweden today. owever, sewage sludge contains undesirable substances such as heavy metals and drug residues, and pathogenic microorganisms.

SUMMARYThe first and most basic skill a rider needs to learn is how to sit correctly in the saddle. This decides whether or not the rider will be able to follow the horse?s movements and use her riding aids in an efficient way. This correct seat is based on a straight line between the axis of the hip and heel. The seat must rest against the saddle with equal weight on both buttocks and the inside of the thighs.

Pressure ulcers cause a lot of patients unnecessary suffering. This suffering could be decreased through improved knowledge about prevention, so that pressure ulcer will not appear. The purpose with this review was to study how nurses assess risk and prevent pressure ulcer, and to study how nurses use available knowledge. The method consisted of searches in databases and searching trough references. Our result is based on ten articles, qualitative, quantitative and reviews.

WesDyne TRC AB is a fully owned subsidiary of the global WestinghouseElectric Corporation. WesDyne is a world leader in non-invasive methods for theinspection of nuclear power plants. One of the inspection platforms used to scanfor defects in and around the welds in the reactor vessel is called the T-crawler.The T-crawler operates under water in a radioactive environment by stepping onthe vessel (reactor tank) inner wall using suction cups. The environment is harshand many traditional positioning sensors are not suitable for implementation. Thisthesis investigates the possibility to use a gyroscope and a pressure sensor tocreate an alternative and independent positioning system.

AbstractIntroductionWedged shoe insoles are used as a treatment for different problems in order to change the ground reaction force. They can secondary cause different loading patterns under the foot compared to normal. No previous study has, to the author?s knowledge, clinically evaluated the plantar foot pressure with different full-length wedges in normal persons.PurposeThe purpose was to evaluate the plantar pressure with different degrees of full-length wedges in normal persons.MethodTwenty persons with normal feet have participated in this single blind study. Wedges were produced clinically in four different shapes, 3° valgus, 0° flat, 3° varus och 6° varus.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.