The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

Denna rapport redovisar den process som utvecklingen av OTWs nya webbplats har inneburit. Jag har arbetet med att skapa en ny design av deras nuvarande webbplats där syftet har varit att skapa en webbplats där man presenterar sig själva på ett bra sätt och ställer mindre krav på redaktionellt innehåll samtidigt som man följer konventioner för branschen och målgruppen. I utvecklingen av webbplatsen anpassar jag mig efter rådande designprinciper och riktlinjer för användbarhet så att webbplatsen ska bli så lätt att använda som möjligt. Utvecklingen av prototypen har skett i mjukvaruprogrammet Axure RP. Resultatet av projektet är två interaktiva digitala prototyper i form av en mobil version samt en desktopversion.

For research purposes Saab has developed a generic mathematical model denoted VEGAS of an aircraft with a configuration similar to JAS 39 Gripen. Today parts of Gripen backup control system are used also for VEGAS making the system subject to both corporate and defense secrecy. The main objective of this master thesis is to design, verify and implement public pitch axis flight control system for VEGAS. Furthermore, simplifications regarding the design process is to be examined. Design of pitch axis flight control system for the entire flight envelope has been carried out.

Bakgrund: I konkurrens om morgondagens konsument kommer sannolikt materiella värden inte räcka till. Företag måste också kunna erbjuda immateriella värden genom upplevelser. Ett sätt att göra detta är via produktens design. Den företagsekonomiska relevansen understyrks ytterligare av det faktum att lite forskning finns kring immateriellt värdeskapande och design. Syfte: Syftet med uppsatsen är att bidra med förståelse för hur design kan tillföra immateriella värden till en produkt.

The purpose of this study was to follow a research-oriented design process and to develop a design draft for a digital service that supports users to make more environmentally conscious choises in their everyday life. By following an interaction design process from start to final delivery, the study aims at creating a broad understanding of the process. Therefore, many userrelated activities were implemented in the study: eg. personas, scenarios, sketching and user testing. The project resulted in digital wireframes for an iPhone application using embedded GPS to identify and locate environmentally friendly businesses.

This paper investigates the presentation of Islam in textbooks used in the study of religion in high schools. The papers focus on two main questions concerning the ways in which Islam is presented in the analysed textbooks, and how the new curriculum has influenced the portrayal of Islam in the materials. Here, the paper utilizes a method of critical discourse analysis with Faircloughs three-dimensional analysis. The paper then concludes that the presentation of Islam is negative in nature, with the content and view of Islam having been simplified and stereotyped. Often the textbooks studied frame Islam as being an aggressive and oppressive religion, especially in matters con-cerning women.

I uppsatsen undersöks Svenska kyrkans bekännelseskrifter samt tio konfirmandböcker som är utgivna mellan åren 1942 och 2007. Syftet med uppsatsen är att, med utgångspunkt i Svenska kyrkans bekännelseskrifter, undersöka hur material som under modern tid varit och är vanligt förekommande i Svenska kyrkans konfirmandarbete presenterar dopet, dvs. vad som sägs och hur det sägs, samt om och i så fall hur detta material återspeglar bekännelseskrifternas presentation av dopet.Uppsatsen behandlar frågorna om hur dopet presenteras i bekännelseskrifterna respektive konfirmandböckerna, om det finns samstämmighet mellan dessa samt om det går att se någon förändring i samstämmigheten över tid. Konfirmandböcker jämförs dels gentemot bekännelseskrifterna och dels gentemot varandra.Undersökningen visar att det finns en spännvidd i de konfirmandmaterial som undersökts och den kan ses som ett uttryck för varje tids försök att svara på frågan hur kyrkan gör sitt budskap relevant för tidens konfirmander. Undersökningen visar även att bekännelseskrifternas funktion som något som varje tids teologiska reflektion kan ta avstamp i är tydlig.

In inhalation anesthesia life-support systems are used to provide gases to the patient and to monitor important parameters. These systems are used in dynamic and stressful situations where the information-load on the operators often is significant. This thesis presents a design concept of an anesthetic system. The design goal has been to keep the information-load on the operator low with the objective to minimize confusion and error.A number of contextual inquiries were made in the operating room during surgery at four hospitals in Sweden. The goal was to understand the actual use-situations when anesthetic systems are employed.

Nowadays, packaging design is seen as a competitive tool and its importance for corporations is becoming increasingly apparent. The rivalry within homogeneous markets puts high demands on differentiation and the ability to create something more than the product itself. With this fundamental question, the soft drink industry has been examined and a case study of the brand Coca-Cola has been performed. The aim is to investigate how packaging design is used as a tool for strengthening a brand and to explore which additional values this contributes. In addition, the study observes the most important factors in the development of packaging design.A theoretical work of reference, consisting primarily of theories related to branding, design development and visual identity, has been developed to support the study.

This thesis project is based on a business idea where users can design their own t-shirt online. The project shows the first step in the development process where a prototype for a user interface is created and evaluated.The purpose of this thesis project is to answer the following question:How does one develop a user interface for t-shirt design with consideration to interaction design theories?In order to answer this question the design process began with scheduling the work at hand. The first step was to build a conceptual model based on specifications made prior to this project. This conceptual model became the foundation for the physical design.A high fidelity prototype was created using Macromedia Flash and Actionscript 2.0.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

Denna rapport beskriver det arbete vi gjorde hos Ninetech i Karlstad. Målet med vårtarbete var att skapa en applikation som hämtar information rörande resultat av automatiskabyggen i pågående projekt. Sammanställningen av olika projekt skulle visas löpande. Vårtarbete kan beskrivas som två delar, en praktisk och en teoretisk del. Den praktiska delenbestod av att skapa en applikation som visar status på de olika projekt som Ninetech förtillfället arbetar med.

The purpose of this thesis is to construct a marketing model to be used both theoretically and practically when working with marketing in Swedish public libraries. This objective is achieved by first making a literature review of the written works on the marketing of libraries, and then studying the marketing activities at the public library in Bollebygd, Sweden. The theory is based on the marketing mix model the 7 ps, which serves as a framework for the presentation of the empirical result and the analysis. One of the questions posed in the beginning of the paper is how the library has worked with marketing over the past ten years. Through a combination of methods observation, textual studies and interviews the marketing activities employed at Bollebygds library are noted.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.