This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..

This study has investigated the possibilities of implementing lean in a division of a hospital in Stockholm. The goal was to reduce the lead time for the patient to get his diagnose by implementing lean in the two production flows of this division. In order to accomplish it, a complete map over the value stream has been done. With the help of the value stream map and lean theory a list over the processes in contradiction with lean has been made. Finally propositions to implement lean and by this way reduce the lead times in this stream have been made out.

Det finns mycket tidigare forskning kring könsrepresentation i media, dock är det inte alla medie-genrer som uppmärksammas och mode har ofta en marginaliserad roll i genusforskning. I denna uppsats undersöks hur den franska modetidningen Vogue Paris representerar ?la Parisienne? ? den parisiska kvinnan ? utifrån de två motsägande vetenskapsteorierna feminism och post-feminism. Syftet med denna uppsats är att bidra till den feministiska debatten kring mode och könsrepresentation i media och ge ny insikt kring hur modetidningen representerar kvinnan. Genom en kvalitativ innehållsanalys av olika modefotografi ur två nutida nummer av modetidningen som representerar ?la Parisienne?, med Roland Barthes semiotiska modell som metod, besvaras frågorna: hur representerar Vogue Paris ?la Parisienne? genom modefotografi; på vilket sätt (re)konstrueras myten om ?la Parisienne?, samt vad innefattar denna myt; hur kan denna representation/konstruktion uppfattas utifrån feminism respektive post-feminism; och slutligen, hur förhåller sig denna myt till den dominerande ideologin om kvinnlighet? I min undersökning kommer jag fram till att Vogue Paris konstruerar en motsägelsefull och kontrastfylld myt om ?la Parisienne?, som innefattar en innebörd som både feminin och sexuell men även naturlig och maskulin.

The environmental assessment system Miljöbyggnad is a Swedish system initiated by Bygga-Bo-Dialogen to assess buildings with regards to three main areas; ?Energy?, ?Indoor climate? and ?Materials?. A building can obtain three different classifications depending on how well it manages to meet the demands. GOLD is the highest classification and is followed by SILVER and BRONZE. The majority of the measures needed to comply with the demands are done during the design phase.

The Swedish building contractor JMRegion Öst would like to to investigatethe possibilities of developing andstreamlining the production of singlefamilyhouses. JM are producing singlefamilyhouses with prefabricated framesat a rate of about two houses per week.During construction, the different tasksare performed by JM?s own productionstaff but also by varioussubcontractors.When examining the schedules of recentlyproduced projects, it appears that allthe houses are more or less completedeight weeks before the customer moves into the house. During those eight weeksseveral operations are conducted such asinspections, installation of appliancesand cleaning procedures. The inspectionperiod constitutes between 25 and 35% ofthe complete construction period.By conducting interviews, it has beendiscovered that this final phase is anessential security buffer for delays anderrors that often occur.

Det finns idag ingen konsensus om den optimala rehabiliteringen efter en främrekorsbandsrekonstruktion, vi vet heller inte idag huruvida rehabiliteringen skaspecificeras efter parametrar som kön och ålder. Studien var en korrelerandetvärsnittsstudie med syfte att ta reda på om det förelåg någon skillnad i postoperativlårmuskelstyrka 4-7 månader efter en korsbandsrekonstruktion med avseende på kön,ålder, skada och typ av operativt ingrepp. Av de 330 aktuella försökspersonerna var detendast 74 personer som godkänt deltagande och uppfyllde kraven förinklusionskriterierna. Försökspersonerna testades i en isokinetisk dynamometer(Biodex)för maximal styrka(60gr/s) och uthållig styrka(180gr/s). Resultaten presenteradesgenom ett Limb Symmetry Index.

The purpose of this master?s thesis was to find problems that occur in the production line at Atlas Copco Rocktec Division, in order to decrease the costs of defect in quality. When the problems were distinguished, the authors ought to choose the problem with the highest improvement potential. One request from the constituent at Atlas Copco Rocktec Division was to connect the improvement to the document The Way We Produce. The document provides information and values about Atlas Copco and consists of 10 principles to be able to reach their vision.

Syftet med denna uppsats var att undersöka hur ett projekt startas upp, leds och drivs då det är kopplat till socialt arbete och efterbehandling för hemlösa kvinnor med missbruksproblematik. Bakgrunden är en tidigare b-uppsats som visade på brister i eftervården för dessa kvinnor. Examensarbetet har gjorts genom en litteraturstudie där vi undersökt projekt och projektledning, samt en halvstrukturerad personlig intervju och en telefonintervju med en nyckelperson med erfarenhet av projektarbete. Resultatet visade på att det är viktigt med samarbete och nätverk då det oftast finns många aktörer som kan hjälpa målgruppen, så som socialtjänsten, beroendecenter samt Röda Korset. Genom ett lösningsfokuserat arbete och en upplevelsebaserad metod kan målgruppen få hjälp att komma tillbaka in i samhället och få ett självständigt och värdigare liv.

The purpose of this thesis is to analyze the design and function of an engine production management?s control system and its intended function, and to contrast it with the present management control systems in use on an operational level. Interviews conducted with employees from all levels of the engine production are the main source of this study?s empirical foundation. Information has also been gathered from relevant written material such as annual reports, internal documents etc.

AbstractThis thesis discusses and analyses a 19th century female author's vanishing from history. The study investigates social relationships as figured and described in the epistolary form, based on letters between the author herself and different members of her family. It also tries to identify the author's position and situation in her time and society according to important themes and motifs in her novels. The main purpose is not to reconstruct history, but rather to show the many complex histories that can also be described, apart from the simplified and generalized one. The aim of this study is to, from a post-structuralist perspective, analyze the position of author Marianne Lundegård-Hagberg, and her role as a performative, discursive person that history forgot..

Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.