The aim for this thesis was to develop a proposal of documentation, containing rules and procedures, which JernströmOffset needs to acquire the Certified Graphic Production certification. A fundamental part was to study the materialissued by Sveriges Grafiska Mediaförening, to clarify the requirements that must be met to obtain the certification. Therecommendations found in the CGP material must also be considered.Based on the requirements and recommendations of Certified Graphic Production, a mapping of the workflows atJernström Offset was performed. It was done by interviewing employees from different departments at the company,this to get a clear understanding of the operations carried out throughout the production flow and the final qualityfollow-up.During our reviewing process we found that a number of changes, in terms of working environment and practices,must be made at the company. As a result of this we propose some appropriate actions to be implemented.The documentation was finally written, through the requirements and recommendations of Certified GraphicProduction and then applied to Jernström Offset?s work procedures..

Examensarbete C-nivå, Ekonomihögskolan vid Linnéuniversitetet, Ekonomistyrning, Kurskod 2FE90E, VT 2012Författare:Mats Avalvi, Åsa Lind & Rasmus OlhedenHandledare:Elisabeth KjellströmTitel:Lean Production ? Press & Plåtindustri ABBakgrund:Processtyrning handlar om att se och styra en verksamhet utifrån en horisontell värdekedja. Lean production strävar efter att resurseffektivisera flödet och därmed skapa ett mervärde för kunderna och stärka konkurrenskraften. Detta görs genom att minimera allt slöseri med hjälp av Kaizen som innebär att små ständiga förbättringar eftersträvas. För att detta ska kunna lyckas spelar individen en central roll.

This thesis assignment at C-level is focused on calculation models and prediction methodswhish can be used in the stage we call ?prospecting? of possible windmill locations. Thelocation is southeast of Halmstad at the Farm ?Stjernarpsgods?. The rapport has two mainareas directed towards this task.

The Transport division is responsible for the internal transports on Sandvik MaterialTechnology AB. At the moment there is no clear picture of how the straddle carriers aremoving at the division Primary Products and if it is working in a satisfying way. It isimportant to see the whole picture of the transportation flow so improvements can be made.The purpose of this essay is to survey and analyse the truck flow in a Lean Productionperspective. The essay is delimited to only include straddle carriers transportation ways in thePrimary Products division. To survey the truck flow we have used a method called Walkthrough.This means that we have walked thorough the whole production flow andinterviewed some of the employed on the way to get the necessary information.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Although known and feared for thousands of years, rabies remains a real and present threat to thousands of people, especially in low- and middle income countries. In India, rabies is an endemic disease, causing human deaths every year. The primary mode of transmission is through the bite of an infected dog. Fighting the disease in the dog population through vaccinations remains the most efficient way to eradicate the disease. The knowledge of rabies in India is unsatisfactory, as a lot of people lack awareness about the severity of the disease and the importance of washing the bitten area and seeking medical attention for post exposure prophylaxis when bitten by a dog.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

This thesis uses critical discourse analysis to examine how the English-speaking press in Hong Kong constructs the conflict between the political movement Occupy Central and the Chinese central government. The empirical material consists of ten articles from the region?s two largest English-speaking newspapers, Hong Kong?s oldest newspaper, the South China Morning Post, and China?s only national English-speaking newspaper, the China Daily. Building on the works of Teun van Dijk, Norman Fairclough, Ruth Wodak and John E. Richardson it examines what political ideologies that are favoured by the press and what attitude the press shows for democratic development.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

Syftet med föreliggande studie var att undersöka effekterna av ett längre uppehåll från tobaks- och nikotinbruk på maximal aerob effekt och energiomsättning under submaximalt arbete hos regelbundet snusande personer. Metod23 snusare (18 män, 5 kvinnor) undersöktes före och efter >6 veckors uppehåll från snus (SSP). Försökspersonerna genomförde ett stegrande submaximalt arbete på cykelergometer, ett maximalt löptest och ett uthållighetsarbete bestående av 60 minuter cykling på 50 % av VO2max. Syreupptag (VO2), ventilation (VE), subjektivt skattad ansträngning på Borgs RPE-skala (RPE), hjärtfrekvens (HF) och blodtryck (BT) mättes. Blodprov togs för analys av kotinin, laktat [HLa], blodglukos och fria fettsyror (FFA) i vila och under arbete. ResultatSubmaximalt VO2 och energiomsättning påverkades inte av >6 veckors uppehåll från snus. VE, respiratorisk kvot (RQ), blodglukos och RPE var oförändrade under det stegrande submaximala arbetet.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.