This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

The Common Agricultural Policy has been a burning topic for debate for severaldecades. According to the CAP:s opponents it's effects include pollution, market distortionsand not least a huge expense for the European union.In this study we seek to explain why the CAP has remained almostunreformed since it's constitution in the 1950:s. The means by which we do so isa case study where we analyze the CAP by using three different theories; liberalinter-governmentalism, realistic trade theory and new institutionalism.In the final chapter we conclude that the theories complement each other. Newinstitutionalism explains the rigidity of the CAP. The liberal perspective explainsthe origin and the logic behind the policy whereas the realistic point of view putsthe policy in the light of an international economic theory and recognizes nationalpolicy makers roll in the inflexibility of the CAP..

Vaccinology is an ever expanding field. As a member of the veterinary staff it is important to stay up to date with the continuous new scientific data and recommendations that affect the care that our companion animals receive at the veterinary clinic. This paper presents adverse vaccination reactions, their cause, risk factors and suggestions how we can minimize the risk of adverse vaccine events in dogs. Dog owners in Sweden were allowed to answer a questionnaire about adverse events following vaccination. Lethargy, edema and pruritus were among the most frequently seen adverse effects.

This thesis calculates and compares the values of improved environmental quality due to future possible investment alternatives in biogas production facilities at Käppalaförbundets Reningsverk (Käppala Sewage Treatment Works) in an attempt to determine which alternative yields the highest such value. Käppala faces three investment alternatives for the usage of biogas. The alternatives are production of vehicle fuel, district heating and thirdly, heat and power production. Estimates of the value of environmental change are calculated for each of the three investment alternatives, and these estimates are then compared. The environmental change in question is the change in discharge levels of carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and particle matter.

In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted.LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

The county administration asked LKAB to make an inventory of possibly contaminated sites caused by their mining activity. The inventory should be performed according to the MIFO model, a method from SEPA which is used to assess a contaminated site. The first phase involves collection of information through interviews and site inspections and in phase 2 a general survey with field sampling is conducted. LKAB started the work with the first phase of the survey during 2003. During this project the information collected in Phase 1 was evaluated and 16 of the sites were chosen to proceed to MIFO Phase 2 (six sites in Kiruna, and 5 sites respectively in Svappavaara and Malmberget). The sampling of these 16 sites was performed during week 27 2004.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

Aim: The aim of the study was to investigate 1RM and what power could be generated in bench-press and half squat concentric at certain percentages of 1RM. Special interest was put to evaluate men (M) and women (K), strength trained (ST) verses non strength trained (EST) in generating absolute power as well as power relative to 1RM.Method: In total 59 subjects mean (± SD) age 24.9 ± 4.1 years divided into four test groups: 20 male non strength trained GIH-students (EST M), 20 female non strength trained GIH-students (EST K), 10 male strength trained - sprinters on national/regional level (ST M), 10 female strength trained - sprinters (ST K) on national/regional level. They did two tests on 1RM and power in events of concentric bench-press and half squat in a Smith machine. In the first test session 3 ? 5 lifts were made to measure 1RM in each event.

Persistent pink in beef patties and hamburgers is a problem in the meat industry that has been known for a few decades. It is a costly problem as it can give rejections of food by consumers. Studies around the world have tried to solve the problem but it still remains a mystery. There are many different theories of what is causing the red colour. Some of the most likly theories are reducing hemocromes, high microbiological loads, contamination of nitrite or organic/non organic substanses, DFD meat etc.

Generally, the economic health of Swedish roundwood truck transport companies has not been good. Profitability is important for maintaining the stability in the transport business, which is a condition for long-term transport planning in the forestry sector. The scope of this study was to identify probable factors influencing the profitability of roundwood truck transport companies and quantify the influence of these factors on economic results. The study was carried out at a major roundwood truck transport organisation in mid-Sweden and was implemented in four steps. In the first step economic results from the haulage contractors were collected and a random sample was taken from accounted net margin for the account year 2005/2006. In the second step hauliers were interviewed to identify probable success factors. At the third step data for identified factors were gathered through a questionnaire.

Currently, the whole globe is faced with serious problems which negatively affect people around the world: increased pollution, excessive waste, and weather pattern changes. ?Left? and ?right? wing political parties alike have embraced ?green? politics and for many of these parties, environmental issues have become a top priority that is very much reflected in their manifestos. This study examines the environmental goals of two of Sweden?s largest political parties and how these ambitions are reflected at a local level.

The aim of this project was to develop a numerical model simulating the global transport of air pollution. The model currently used by SMHI, the Swedish Meteorological and Hydrological Institute, was intended to perform such simulations at regional scales. However, the usage of a grid based on longitudes and latitudes makes this model work poorly in global simulations. The problem with this grid is that the nodes are concentrated near the North and South Poles. Due to this characteristic, the Courant, Friedrich and Lewy-condition for numerical stability puts a sharp bound on the timestep length.

Examensarbetet kommer underso?ka aktiv ljuddesign fo?r tysta personbilar. Utifra?n tidigare forskning om hur elbilen utsa?tter ma?nniskor i ta?tomra?den fo?r fara pa? grund av avsaknaden av auditiv information, ska vi utveckla fo?rslag pa? dynamiska billjud som fo?rha?ller sig till trafiksa?kerhet, design och minskade ljudfo?roreningar. Den totala ljudniva?n i sta?der a?r la?ngt o?ver rekommendationen och fo?ljden blir ett ha?lsoproblem i sto?rre sta?der.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.