During the middle of the 18th century the development of Toyota Production System, TPS, started in order to streamline the processes. TPS was based on the principles of assembly line production but unlike previous performers Toyota let the manufacturing be constantly affected by demand. At the end of the 18th century TPS was described by Womack and Jones in the book "The machine that changed the world - the story of lean producion" where TPS got the name lean. The principles behind lean is to maximize customer value and eliminate waste which means making products and services more valuable to the customer. 1Lean was for a long time a philosophy and an approach limited to industries and production based companies.

This EEF-project is a part of a larger project at SLU, Division of Reproduction, Dept of Clinical Science, with the intention of developing and evaluating new methods for the assessment of stallion semen quality. Over the last 10 years there has been an increase in the use of artificial insemination with cooled semen in Swedish horse breeding. At the same time, foaling rates have decreased. This has lead to a need for new and better methods of assessing the quality of stallion semen. This EEF-project was based on an objective method to calculate motility, with QualispermTM, in fresh and cooled stallion semen, and after selection. Today sperm motility evaluation is mainly done subjectively by visual assessment with a light microscope, and the correlation between these motility results and fertility have varied.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This master thesis was conducted at Motala Wire Works Ltd (MWW) in Motala during the autumn and winter of 2007-2008. The thesis named ?Future layout of Motala Wire Works? focuses on making a better planed layout for the factory, which also take in to consideration future changes.Motala Wire Work produces wire mesh products of varying sorts for the white goods industry. The factory was started by Electrolux during the 1950?s.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

In this thesis, two studies with different drills were included. In one of the studies two drills were compared: Väderstad Rapid and Väderstad Spirit. In the other study various drills for direct drilling were compared. The study with Rapid and Spirit was placed in two locations with different autumn tillage; one on ploughed land in Uppsala and one on cultivated land in Västerås, both with relatively high clay content. Rapid drills have a single disc coulter, while the Spirit drills have a double disc coulter. Various aspects were compared such as aggregate distribution, seed placement, emergence, crop yield and economic outcome.

Sammanfattning Rum, form och växter är ett avslutande examensarbete som handlar om växtkomposition. Jag har valt ett antal profiler inom områdets principer om rumsskapande, komposition, färglära och några tillämpningar som jag studerat på plats samt gjort egna förslag. I detta arbete har jag börjat med rummens uppbyggnad, deras förutsättningar och sammanhang och hur detta påverkar platsen. Formen och proportioner skapar olika upplevelser och inhägnaden som har betydelse för intrycket. Människor får olika känslor beroende på rummets öppenhet, slutenhet och skala. Kapitlet som handlar om gångar berör uppbyggnaden och människans rörelsemönster i dessa.

In the end of 1998 the company Holmen Skog AB was certified accordint to the FSC system with an area of 1 036 000 hectare. After that Holmen Skog AB has been working actively with the nature conservation in the forestry. In order to control the quality of the company?s nature conservation in final fellings they started a yearly inventory which is called BAKRUS (Judgement of ecological and culture care in relations to policies for a persevering silviculture). After 1999 the control was expended to include all actions in the forest.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

I takt med att besökare och patienter ökar måste kontinuerligt Östra sjukhuset verksamhet utvecklas. Detta medför omläggningar i trafiken och förflyttningar av verksamheter. Idag finns flertalet brister kring Östra sjukhusets fysiska planering som behöver ses över, dessa är bland annat trafikflöden, säkerhetsaspekter och parkeringsmöjligheter.Rapporten redogör för förändringar i den fysiska planeringen som förbättrar dess utformning. Genom studier av relevant litteratur och diskussioner med expertis har förslag av problemområden tagits fram. Dessa har sedan bedömts efter listor av deras respektive för- och nackdelar som kunnat urskiljas.Arbetet visar framtagandet av ett väl fungerande förslag som kan verka som en bas för idéer till nutida och framtida förändringar kring den fysiska planeringen.

A common goal in practical forest management is to maximize the yield, measured in economical terms. When a forest stand is thinned a so called inoptimality loss can arise due to non-optimal decisions. This means that the selected management schedule results in a lower net present value than the optimal one which lowers the profitability for the forest owner. Holmen Skog uses the term tract which means an aggregation of stands made before a management action. A tract should be delineated in different tract parts in connection with pre-thinning planning if there is different bearing capacity within the tract, different thinning grades should be used or if the tract contains a weaker part that should not be thinned.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

To produce milk of good standard the feed for the animals kept for milk production is an important part in the work of quality. This makes it important to feed them with good forage, especially when feeding with silage. The process of making silage is very complex and requires a careful handling to be successful. The fundamental idea is to create an anaerobic environment in the herbage to favour the desirable micro-organisms, in this case the lactic acid bacteria. This environment is created by careful handlings were the importance is to pack the crop well and cover it as soon as possible to exclude oxygen.

The milk production has developed rapidly the last years. The milk production per cow is increasing and the production units are larger with an increasing number of animals and a decreasing number of workers. Many milk producers invest in automatic milking systems (AM) to meet this change. In these systems the cows can voluntary decide milking frequency and usually the milking frequency are higher than two times per day. But how does the milking frequency effect the composition of the milk? The aim of the present study was to study the effect of milking frequency on the milk composition and the milk fat quality.

The aim of my study is to answer the question whether there is a potential for services by working horses in the Swedish municipalities. The Swedish University for Agricultural Sciences (SLU) and Swedish Farmers Union (LRF) has started a cooperation called Climate School (Klimatskolan), with the purpose to increase knowledge in environmental and climate related issues in context of agriculture. This Master thesis is in the framework of the Climate School.Global warming is a problem that gets much attention today. Global warming and climate change are two subjects that are very much in focus on the political agenda. The municipalities of Sweden have a big responsibility concerning environmental work and to develop their own environmental thinking.