Few issues raise such an engagement as parking areas, both by the municipality, property- and car owners. For car owners, it is of great importance where to park his car. Parking is not simply about availability but also about safety, security and how it affects the urban environment.When the land will be utilized for building development, there are regulations in Chapter 8, § 9 PBL how parking will be provided. Property owners have an obligation to provide parking space and it shall be arranged in an equitable manner, on the site or near it, which gives an opportunity for shared parking facilities. The guidelines for parking that the municipality has adopted should be the starting point for the extent of that space for parking is required when a building permit review.The first thing you should look at, is if the property owner has ability to provide parking space at his own property, but this is not always the best solution in areas such as inner cities.

Allanblackia is a tree genus native to humid forests in West, Central and East Africa. Its fruits contain large seeds from which edible high-quality fat can be extracted. In order to create a sustainable supply chain of Allanblackia seeds, a domestication program has been initiated with the purpose to enable smallholder farmers to grow the tree as an agroforestry component and cash crop. More knowledge is required to understand the tree?s biology and possible symbioses involving soil microorganisms with plant growth enhancing poten-tial.

The short term effect of phosphorus in sewage sludge was investigated to establish howmuch of this a farmer can grant him- or herself, if using sewage sludge as a phosphorusfertilizer. Possible differences in plant availability between sludge phosphorus precipitatedby iron, aluminum or calcium integrations were studied in a sandy soil at two pH levels.The sludges were analyzed using pot and incubation trials. As the intention was to investigategrowth limitation due to phosphorus deficiency, a soil with low phosphorus supplywas chosen as well as a low phosphorus application rate. Sludge corresponding to 12kg phosphorus per hectare was applied. Treatments fertilized by sludge were compared totreatments where 0, 6 and 12 kg phosphorus per hectare from mineral fertilizer was applied.Every treatment was replicated six times.

Gene technology has become more and more attractive in plant breeding during the last twenty years. This is probably because it can readily improve the existing commercial cultivars that have only one or a few drawbacks by modifying one or a few genes without changing the main genetic constitution. In this regard, gene technology is more effective than conventional breeding.The aim of this project was to analyze the fruit quality of the non-transgenic apple scion ?Jonagold? grafted on non-transgenic and rolB-transgenic apple rootstocks. The rootstocks used were M9-rolB1, M9-rolB2, M26-rolB and non-transgenic controls M9 and M26.

This survey was made during the summer of 2004 and the spring of 2005, on commission from the National Board of Forestry. The aim of this report was to investigate how often Norway spruce (Picea abies L. Karst), is planted on poor Scotch pine (Pinus Silvestries) sites and if it affects the yield of Norway spruce? In order to investigate this, data from 29 stands witch had a lower site index than T24 was collected. The investigated stands were situated in the southern-eastern Sweden. In 20 plots in each stand, the highest tree, age, number of seedlings, site index and tree species per stand were measured.

In ambition to produce more and better harvests, artificial fertilizers are used to produce a better growth of crops in the agriculture landscape. This contributes to leakage of nutrients. Our forests also exhibit a leakage of nutrients. Air pollution contributes to more nutrients. High precipitation with high water flows as a consequence seems currently to occur more frequently in the county of Halland.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

The high feeding value of red clover makes it into an important species in Swedish agriculture. There are three different maturity types grown in Sweden, early, medium late and late. The time for heading, regrowth and winter hardiness is affected by the maturity type, but there can also be other factors that are affected by the maturity type, for instance fiber content. In a greenhouse experiment three red clover varieties of different maturity types were compared; early Titus, middle late SW Nancy and late SW Torun. The features compared were fiber content and differences in development rates.

During the cultivation season there are a several cropping activities to carry out. At what time these activities are carried out is affecting the result and also on the economy of the crop production. As the production costs are high in potato production, it is important to keep an eye on the economy. Profitability is the most important factor in most crop production systems. If the costs are not covered, it is difficult to justify the production.

The debate on the future of Nuclear power in Sweden has increased with the discussion on global warming. The uncertainty of fossil fuel- and carbonprices the latest years has aroused considerable interest in Nuclear from power companies, industry and politicians. Nuclear power plants have negligible CO2 emissions and are not directly affected by increased price of emission rights and fossil fuels. The future power production needs to reduce its emissions of greenhouse gases to become sustainable. The purpose of this study is to examine the value for power producers to have the option to invest in Nuclear power and how a Nuclear power venture would affect future electricity prices. The study uses two methods, a traditional cash flow model and real option analysis, to estimate the value of Nuclear power.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

Local differentiation may occur during a short period of time and is part of the formation of new species. The isopod Asellus aquaticus is an example of a species in which local adaptation has occurred during a short period of time. An establishment of stonewort (Chara spp.) vegetation in Lake Tåkern (in the 2000) resulted in two different Asellus ecotypes; a lighter pigmented, smaller one that lives among stoneworts grazing periphytic algae, and a darker, larger ecotype that feeds on decaying leaves in reed (Phragmites australis vegetation. The purpose of this study was to examine whether there are differences in growth between ecotypes, depending on whether the food was periphytic algae or leaves, and to study the choice of substrates between the two food types. For the study, animals from both habitats were brought in from Lake Tåkern to the laboratory.

This thesis aims to examine the viability of various techniques for increased electricity generation in CHP plants and the effect of electricity price fluctuations on the profitability.The techniques examined are fuel dryer, pellet production, methane production, combined methane- and pellet production, seasonal heating storages in caverns and pit heat storages and condensing tail. Using Excel and Matlab, the prerequisites for investment costs, revenues and expenses were calculated.What affects the price of electricity is a combination of economic and technological development, energy prices, economic structure, population changes and weather. Different scenarios for the electricity price were therefore examined. In the base case, the electricity price was given by the Nord Pool electricity price statistics of area three in 2011. Thereafter, WiMo was used to design the electricity scenarios for 2030, which was then applied to the data to obtain the viability of various scenarios. The techniques examined were found to give greater profits to the CHP plant by increasing and optimizing the production of electricity.

In Sweden, the eutrophication of lakes, water courses and the coastal areas is considered the major threat to aquatic ecosystems and therefore actions taken to reduce the nutrient load to aquatic system including the Baltic Sea has high priority. There are many different sources of phosphorous and nitrogen and domestic wastewater is one contributing factor to the high load. Especially waste water from households that is not connected to municipal sewage treatment or a local small scale plant with appropriate nutrient removal efficiency is considered a problem. These types of households are quite common in rural areas in Sweden and in areas where summer houses has been converted to permanent living. Swedish legislation now permit the municipalities to decide in which areas within the municipality higher demands of the local small scale treatment facility should be met by the households (i.e.

Public concern about the release of toxic compounds from wood-based products drives legislation towards enforcing industries to find and use more sustainable solutions for wood treatment. Plant oils are good alternatives to treat wood, minimizing or even neutralizing the impact on the environment. Wood modification with epoxidised linseed oil (ELO) and acetic acid as catalyst has proven a suitable method to impregnate and protect wood. However, the mixture presents a serious inconvenience because of the quick polymerization of the ingredients that limits its practical application. Therefore, this study was designed to evaluate an alternative method using a two-step process which bypassed the problem above.