In this report female farmers use of technical equipment is investigated. There is little research made on this subject in Sweden, therefore this report can be seen as an explorative study. Research makes it clear that machinery, throughout history and even today, has been seen as a male area. Heavy machines are often associated with the same attributes as masculinity. Force, power, efficiency and control are some examples.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

On board ships different type of maintenance activities take place. Some of those require working with vibrating handheld tools. Traditionally there is a high awareness of the risks with different type of duties such as protecting the skin from oil or other chemicals, the eyes from splashes and hearing from high noise levels. The experience we have from our time as on-board cadets are that there is less information about vibration hazards available compared to the information concerning other hazards on board.There are threshold values that workers, by law, are not allowed to exceed when working with handheld vibrating tools. The purpose of this study is to investigate how common the use of this type of equipment that can cause damage by vibrations, to the hands and arm amongst the deck crew, and if the crew informed about the risks involved.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

Examensarbetet har genomförts på den produktionstekniska avdelningen på Volvo Construction Equipment i Hallsberg.Syftet varatt ta fram ett nytt koncept för hyttsvetsproduktionen på fabriken;hur produktionsprocessen skulle kunna se ut i framtiden. Man vill göra flödet i linan mer effektivt med avseende på kvalitet, flexibilitet samt eliminera tidsslöseri som idag är ett problem.När fabriken påbörjade sin produktionproducerade man två olika varianter av hyttertill anläggningsmaskiner, idag har man ökat produktionen till fyra varianter. I takt med att varianter samt orderingång ökat har man byggt på befintlig produktionslina istället för att utveckla en ny, anpassadlinafördet nya läget. Resultatet har blivit att maxkapaciteten är nådd och linan klarar inte att hantera en planerad produktionsökning.En grundlig analys av hyttsvetsprocessen, innehållande intervjuer med bland andra platschef, teknisk chef och flera tekniker genfördes för att få förståelse för processen. Övrig information såsom effektivitetsmätningar på utrustning, värdeflödesanalyser och avvikelserapportering har funnits tillgängligt och legat till grund för arbetet.

The vegetation?s impact on erosion control is widely explored, even though research? results are scattered where it suggests a both positive and negative relationship between roots and erosion tendency. Research has measured the roots? impact on erosion by many different methods, hence the aim of this study is to offer a clearance of what factors play an important role in the choice of appropriate species controlling river bank erosion. I have therefore studied 17 articles concerning vegetation and erosion control, which were found in different databases such as: Web of Knowledge, Biological Sciences, Academic Search Elite and Google Scholar.

To create multifunctional buffer strips along a watercourse in an economically sustainable way requires consideration of many different factors. In this plan we have selected pollutant reduction as the main purpose of the buffer strip. We have also strived to achieve minimal income loss due to reduced production, increased biological diversity, good game preservation that leads to higher income from hunting, aesthetical satisfaction and possibility to profit from available subsidies. This is done mainly to make landowners/farmers more interested in creating buffer strips along water courses. As sand is the dominant type of soil in the area, the water course is less affected by surface runoff compared to if the soil would be clay or some other finer texture. Game preservation and subsidies have therefore been the main factors when establishing the width of the strip, because these require wider buffer strips in some cases.

The aim of this paperisto find out which plants the Cistercian monks might have cultivated in Sweden during the Middle Ages and which types of plants it would have been practical to grow inside or outside of the Cistercian monastery precinct. Archaeologicaland archaeobotanical studies have been consulted to find out which plants were available in Sweden during the Middle Ages. Examples, mainly from Scandinavia, but also from the continent, are used to show that the monasteries were large institutionsthat had to feed a large number of people and that there would not have been enough space to cultivate everything needed within the monastery precinct.Secondary sources have in the main been used to gather this information, except in the case of the Swedish monastery of Nydala where F-Topo, a database developed by the County Museum of Jönköping,has been used to analyse the amount of land and the types of properties owned by the monastery.The conclusion is that for practical reasons the monks would have cultivated plants that needed to be close at hand, that were rare or delicate, that could not be stored for long periods and that were used in small quantities within the monastery precinct. This would include medicinal plants, herbs for cooking and some vegetables like lettuce, spinach,and similar,that do not keep well. Most other items, grains, cabbages, root vegetables, peas and beans could equally well be cultivated outside the walls.

An increasing number of chemicals are being transported by ships along the Swedish coastline. Many of these chemicals may pose a threat to the environment. Accidents and spills are luckily rare, but nonetheless it is important to be prepared for a possible chemical spill. The Swedish Coast Guard is responsible for responding to chemical spills at sea, and has both equipment and trained personnel for the purpose. In order to prepare for a possible accident one also needs to know what is currently being transported at sea.

This report was an outcome of a cooperation between ?The Visitor and Knowledge Project Carl von Linné? and SLU, the Swedish University of Agricultural Science. The aim with the cooperation was to create a garden and to suggest suitable plants for an orangery already built. All species suggested should have a documented relationship with Carl von Linné. The project is located in the southern part of Sweden at an estate named Möckelsnäs not far away from Linné?s birthplace.

The effect of inoculation on containerized pine and spruce seedlings in a nursery with two ectomycorrhizal fungi was investigated in regard to the development of mycorrhiza and plant growth. The fungi were Elaphomyces muricatus and Elaphomyces granulates and the inoculated seedlings were compared to an uninoculated control. These seedlings were all fertilized with arginine. Five mycorrhiza species were found after DNA sequencing of the mycorrhizal root tips with different found morphotypes on seedlings from all treatments. Thelephora terrestris was the type which had the greatest distribution on pine seedlings and Tylospora asterophora was found at big extent on spruce seedlings. The inoculated species was not found, if it was due to the species hadn?t colonized the roots or if the DNA sequencing failed we can only speculate about.

Rwanda is one of the poorest countries in the world and about 70-80 % of the population lives in rural areas. The land is strongly affected by land erosion which makes it difficult for the agriculture and food production. Agroforestry is a system where tree plantation is combined with livestock- and crop production. The system provides soil fertilization and binds the soil together. Some of the trees used in agroforestry systems are also used as fodder.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

AbstractThe importance of good construction planning affects the final costs of the production and the timing of the project. Planning for building projects has been studied with the aim of identifying how three week planning appears in the construction industry today.A case study has been conducted in Navisworks Simulate to assess whether the software is suitable to connect the task schedule with the BIM model to create a 4D model. 4D models are used for performing 4D construction simulation to visualize the project. In order to use the benefits of the model, investment in equipment and software is required. This means higher costs for the companies.