Uppsatsen undersöker inledningsvis om FOI:s principer för kravformulering kan anses behöva kompletteras mot bakgrund av Försvarsmaktens behov och undersöker därefter kvalitén i några av flygvapnets kravunderlag relativt principerna för kravformulering. Av resultatet framgår att principerna kan behöva kompletteras med principerna prioritering och kontextuell beskrivning. Av fallstudiernas resultat framgår att kvalitén i flygvapnets kravunderlag relativt principerna för kravformulering generellt är låg, att den varierar mellan underlagen och att den i vissa fall är mycket låg i fråga om uppfyllnad av principerna. Uppsatsen rekommenderar att FOI:s principer för kravformulering utökas med principerna prioritering och kontextuell beskrivning. Vidare rekommenderas flygvapnet att öka kvalitén i framtida kravformuleringarna så att den militära nyttan av arbete med kravformulering även kan öka.

Equestrian sports and the interest in horses have existed for hundreds of years. It is only in the last thirty years the technological development have enabled closer studies of equine locomotion. The production of both soft- and hardware that manages to capture and analyze the fast movement of the horse has resulted in a large increase in locomotion research. Even though the interest in horses and the different disciplines they compete in is great, there is a small understanding in how the rider influences the movement of the horse in different types of training. There are several studies available where horses moving freely without the influence of a rider have been studied. What happens with locomotion and ground reaction forces when a rider and equipment are added is not well studied. The objective of this study was to investigate if there are any differences in the ground reaction forces between sitting and rising trot. The study contained seven horses. Six Grand Prix dressage horses and one dressage horse competing at intermediate level.

This work has been carried out at a company in the region which has about 30000 employeeswith about 400 sites all over the world. The company outsources their network including theLAN refresh and the WAN migration. They needed help with an upgrade of their LAN at theirScandinavian headquarters and to find a new solution for their WAN. The reason why the upgradeof the LAN was needed was that the equipment was too old and did not pass the securityrequirements. They also required a solution to segment their LAN, which consisted of a singlelarge VLAN with 1,300 employees.

There are certain organizations that manage to handle risk in such a successful way that they almost stay error-free, in spite of the fact that they daily face the risks of accidents. These organizations are usually given the name High Reliability Organizations (HRO). While the most common example is that of a nuclear plant the variety of what organizations can fit into the category is extensive.The purpose of this study is to describe safety culture and theories about HRO and how these can be found in practise within an organization.This qualitative research uses influences of ethnography in its method. The ethnographical approach was picked due to the field of the study and the cultural context in which it is set.The results of the study identify a number of elements sorted into four themes. These themes are deemed compatible or non-compatible with relevant existing theories.

The basis for this study was my own conception of a weakening of recreational activities in the Swedish secondary school. The aim of the study was to look into five school leaders? ideas of recreational activities. The school leaders? who participated came from various municipalities in two different counties, southern Värmland and northern Västra Götaland (former Skaraborg).

Sewer trenches usually contain material with a higher hydraulic conductivity then the adjacent soil. Thus they can serve as paths of preferential flow in a polluted area. Wastewater from factories can also leak from wastewater pipes and pollute the soil in the sewer trenches.The purpose of this project was to investigate pollutions in sewer trenches and in sewer pipes in the industrial area of Köpmanholmen, 20 km south of Örnsköldsvik in the north of Sweden. To make an estimation concerning the potential of transport of pollutions in sewer trenches, hydrological calculations were performed.Leakage to any greater extent did not seem to be a problem in the area. This is the case both for the concrete and the wooden pipes that have served as factory wastewater pipes.

Volvo Personvagnar är ett av de starkaste varumärkena i bilindustrin, med en lång och stolt historia av världsledande innovationer. Fabriken i Skövde tillverkar motorer i både bensin- och dieselvarianter. I framtiden planerar Volvo att införa nya typer av motorer med gruppnamnet VEA, Volvo Environmental Architecture. Dessa nya motorer kommer att vara standard i alla nya Volvobilar, men tillverkning av de gamla modellerna kommer att finnas kvar För att förstå hur de nya transportsystemen i fabriken kommer att fungera tillsammans med de gamla transportsystemen och för att veta om de transportsystemen kan hantera framtidens krav krävs en simuleringsmodell.Under våren 2011 gjordes ett liknande projekt, då en simuleringsmodell av transportsystemen skapades. Men eftersom modellen var för komplicerad och krävde mycket simuleringstid beslutades att en ny modell ska byggas för att kunna hantera optimering.Det finns tre huvudsakliga transportsystem, automatiskt styrda fordon (AGV), elektrisk hängbana (EHB) och manuella transporter med truckar.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

Arcoma is a company that develops and manufactures X-ray equipment for hospitals. One of the most crucial components is the digital detector. Due to the high cost it is made removable so it could be transferred and used in other X-ray apparatus. The detector is placed in a so called detector holder. The current detector has a rectangular shape which sometimes requires a 90 degree rotation to match the shape of the patient.

In modern society in terms of economics and environmental impact, it is important to ensure that a company is as energy efficient as possible to reduce the amount of energy used. About 10 TWh of electricity used annually to pump drives in Swedish industry. Therefore, pumping system has great potential for energy savings.The objective of this report was to determine how much energy and money that can be saved with the insertion of variable speed drive to six pumps on Bleach plant 4 in Skutskär Mill. The work was performed with electrical measurements during one week, analysis of pump curves and the compilation of production data over a year.The results show that four of these six pumps were profitable and yielded an annual saving of 1172 MWh of electricity and 560 000 SEK. With an economic lifetime of 10 years and a discount rate of 6.8% the final result for the entire life-cycle savings became 3 355 000 SEK.

I detta examensarbete har en undersökning utförts på konsultföretaget ÅF, och deras arbetssätt inom dokumentation och kontrollanläggningar för att utreda om det fanns effektiviseringspotentialer. Undersökningen har i största del innefattat intervjuer med verksamma konsulter inom kontrollanläggningar och elmontage på transformatorstationer. Konsulterna arbetade som konstruktörer och tog fram ritningar främst till kontrollutrustningar. Resultatet från intervjuerna analyserades för att sedan dra slutsatser om effektiviseringsmöjligheter inom verksamheten. Olika kontor i verksamheten undersöktes och arbetssättet varierade på de olika kontoren.

This thesis calculates and compares the values of improved environmental quality due to future possible investment alternatives in biogas production facilities at Käppalaförbundets Reningsverk (Käppala Sewage Treatment Works) in an attempt to determine which alternative yields the highest such value. Käppala faces three investment alternatives for the usage of biogas. The alternatives are production of vehicle fuel, district heating and thirdly, heat and power production. Estimates of the value of environmental change are calculated for each of the three investment alternatives, and these estimates are then compared. The environmental change in question is the change in discharge levels of carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and particle matter.

My questions at issue for this report has it´s beginning in the growing problems of thenegative effects of burning fossile fuels and the rapidly growing energyprices.1. Is it possible to design a micro scale powerplant?2. Is it economically interesting for a potential customer to by such a product?The aim with this report is therefor, with the help of design work and calculations, to answerthese questions and to create a platform for building a fully functional micro scale powerplant.The material used in the report is mostly product catalogs from various industries but alsostudy course littrature about steam engines.The result of the report is that it is fully possible to design a fully functional micro scalepower plant.

The aim with this study was to see how a few teachers with experience of young students with ADHD looks upon the need of special support through ICT and from which perspective of special needs education the support is formed.I related the informants? answers about their views on special needs support based on a relational and categorical perspective and came to the conclusion that all of the informants uses a bit of both depending on each individual students needs. Therefor I could see that the dilemma perspective is current in schools today. The most important need for the students with ADHD in general is, according to the informants, structure and routine.The result from this study also shows that general knowledge about ICT is lacking and needs to increase. This could in most cases be explained by the schools economic resources as that partly prevent purchase of new and more equipment but also forces the school to keep larger groups of students in each class.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.