The use of combi-drilling during spring tillage has become very common in southern Sweden in recent years. Combi-drilling leads to fewer passes on the field and better plant nutrient utilisation. An example of a combi-drill is the Väderstad Rapid, which is very widely used in spring tillage in southern Sweden. The Rapid has separate fertiliser and seed coulters, which means that the draught requirement is relatively high. It thus requires large, heavy tractors, which compact the soil and are comparatively expensive to buy and run. A few years ago the Finnish combi-drill Tume Nova Combi came onto the Swedish market.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

This diploma work covers an investigation over the heat - and hot water systems of thetenant-owner's association, Bogården. The heat - and hot water needs of Bogården aresatisfied by both district heating as well as three heat pumps. Implemented investigationshows that the heat pumps are not used in a profitable way. Apart from that, the reservepossibilities are small. There is also a risk of the growth of Legionella bacterium in thehot water system.Since the heat pumps are already installed, HSB-Gävleborg (responsible for Bogården)has a wish to investigate possible proposed actions for optimization of existing plant.After completed investigation, a new proposed action is presented.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Stump wood is a hot alternative when the heating plants demands more and more forest fuel. The aim with the study has bean to calculate the costs in four different systems for transportations of stump wood, examine if there are any differences in fuel quality for the stump wood in the different systems, analyse if the fuel quality in stump wood is affected with the time it lays by the road side and how much space the stump wood demands on the road side. To calculate the costs for the different systems a system analysis was carried out, where some of the costs were collected through field studies on Holmen Skog stump experiment and other costs were collected from literature and contacts. Data for the fuel quality study was collected from Eons heat plant in Norrköping. Data for the study of how much space stump wood takes along a roadside was collected from field studies.

The horse has been domesticated for several thousand years. It has gone from being used primarily for food and transportation, to become one of the most popular pets in Sweden. With over 150,000 practitioners, horseback riding is one of the biggest sports in Sweden and there is a variety of specializations to choose from. One orientation is western riding which is a broad sport with several disciplines where most originate in cattle work and other ranch tasks. Western riding is a growing sport in Sweden with an increasing number of practitioners and with many different organizations and associations, it is important that the correct knowledge of the equipment used is disseminated. Artificial aids are available in a variety of designs and the most common variants used by western riders in Sweden is draw reins or some forms of martingale.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

Uppsats för avläggande av högskoleexamen i Kulturvård, Trädgårdens hantverk och design 7,5 hp, 2014.

This candidate thesis contains the possibility of expand the Swedish photovoltaic market through photovoltaic cooperatives and a photovoltaic exchange. In the current situation there is a lot of problems with production of electricity from photovoltaic, that?s why we show some possibilities how to avoid these. To understand the problem with photovoltaic produced electricity we first give you a background.We show how to expand the Swedish photovoltaic market by describing how a photovoltaic cooperative and photovoltaic exchange could work in Sweden. It have been confirmed from our market research that the interest of photovoltaic cooperative and exchange is high.To find out how profitable photovoltaic is in Sweden, have three projections been made.

SummaryHerbal remedies have been used for many years to alleviate various symptoms. They were used in ritual acts to reassure the Gods and as medication. Plants as rhubarb and ginseng were used in China long time ago. The Egyptians had knowledge of herbal medicine such as aloe, myrrh and henbane, 1550 BC. The father of medicine Hippocrates used a large number of herbal medicines, and had many theories on the subject.Different parts of the plant can be used to extract the active ingredients.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Syntesdesign AB is an academic company that is supposed to enter the HIV drugmarket by manufacturing a "me-too"-drug with indinavir as the starting substance.Our task is to find 100 potential indinaviranalogues. Our further task is to suggesthow to perform a bondingassay to test the affinity for all these analogues. We willpresent a method, required equipment and calculated costs for the assay..

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

Globally, coastal ecosystems like mangrove forests, sea grass meadows and salt marshes are well known for their ability to capture and store atmospheric carbon effectively. In Sweden, there is still limited knowledge about local coastal ecosystems with similar functions, with alder swamp forests being an interesting example. Therefore, this study aimed to increase knowledge of the factors that can contribute to the potential carbon sequestering ability of alder swamps. Vegetation data and sediment samples were collected from a total of 37 sampling plots across four alder swamps in Bohusl?n on the Swedish west coast.