Sapa är en av de största tillverkarna i världen av aluminiumprofiler. Sapa Building System AB är ett dotterbolag till Sapa group och är en av de största leverantörerna i Europa på byggsystem. Några av deras produkter är bakdörrarna RD 3010 och RD 3020 för lastbilar, släp och trailers som från början var ämnade som sidodörrar. Som bakdörrar är de överdimensionerade då sidodörrar hade högre hållfasthetskrav. I dagens läge väger och kostar de mer än nödvändigt där av önskar Sapa Building System AB en nyutveckling av bakdörrarna.Målet är att omkonstruera bakdörrarna RD 3010 och RD 3020 så att de blir lättare, smidigare och billigare genom att konstruera en ny kantskoning till Sapa Building System AB:s befintliga aluminiumlämprofiler.Arbetet har resulterat i att ritningsunderlag för nya profiler har tagits fram där man valt att limma ihop dörrarnas delar istället för att nita.

The swedish national board of housing, Building and Planning,recommends that all stakeholders in the construction industryperform a moisture control design to make sure that the buildingachieves good moisture resistance. Since June 1, 2006 there are nospecific requirements or quantitative values for air leakage.Although the swedish national board of housing does presentrequirement that the building envelope must be sealed so that theclient?s requirements for specific energy consumption and installedelectric power for heating purposes are met. Despite this, studiesfrom SP shows that few buildings meet the client?s requirements inspecific energy, which increases the risk of occurrence ofcondensation-related moisture damage.This study aims to evaluate curtain walls connections from airsecurity and moisture safety.

The design of the building envelope affects the energy consumption of a building. As the energy requirements for new buildings are becoming more demanding, the performance of the building envelope must be improved. Energy efficiency and durability are important attributes to consider.This report includes investigations of the building envelope, moisture and passive solar energy. It is based on the analysis of two different buildings with different designs. These buildings stand as reference for two of the companies who are working on a new, climate smart, residential area in Uppsala, Sweden.Studies and analyses on energy consumption and moisture transportation were made.

The study took place at a food corporation in Växjö, Sweden. It describes a building that contains four tanks in which glucose syrup is stored. The purpose of the study was to calculate the amount of heat that leaves the building and the amount of heat that is supplied by the installed heating equipment. Before the calculations could be implemented, all the systems that supply the building with heat had to be examined. With a small amount of information from earlier studies, the work to gather all the data necessary for the calculations began.

The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

This thesis analyzes the effects of different fertilization strategies on forest management at Holmen Skog in Umeå district. Harvesting volumes, net present values and fertilization intensity are presented for each fertilization scenario. The planning reserve (percentage area older than minimum final felling age) was also analyzed in this study.The thesis covers the analysis of five different fertilization scenarios, varying in fertilization intensity, from no fertilization at all, to fertilization at every harvesting operation (thinning or final felling). A sub-study was also carried out so the reader in detail can see how the different fertilization scenarios affect individual forest stands of different nature. The analysis has been done with the planning tool PlanWise, which is an application of the Heureka analysis and planning system.

Should new buildings blend in or contrast from the older buildings around? Could contrasts even emphasize different characters? This report is a discussion on that theme. I´ve studied different architects wiev on the question and studied different of examples of where new buildings contrast to the context in a successful way. In part two I´ve done a proposal on a new housing settlement next to Hammarbyhöjden in Stockholm. The new buildings contrast to the existing and the aim is to emphasize the characters in Hammarbyhöjden as well as in the new structure.

A variety of demands have to be considered in the design of a new opera house in Galärvarvet. All possible viewpoints are important to be aware of, as is the need for the new building to be a contrast to the already existing opera house in Stockholm. The restricted site also makes a multitude of demands on the building's design.By rationalizing the layout and structure and also by making the footprint smaller, the complex building of over 30 000 square meters can be fitted and blended into the existing physical context. Unlike the existing opera house in Stockholm, the new opera house shows the rationality and the advanced technology that lies behind the scenes and becomes the character of the entire building. Through the dynamic façade, the new opera can convey any character it so desires, just like scenes do through different settings.

There are currently 2160 buildings in Sweden that are protected by law with the designation as a cultural heritage building, which is the strongest protection that can be obtained for a building of cultural historic significance. The purpose of this thesis is to research how strong and sustainable the protection of such a designation is and how you can motivate a revocation. Furthermore, this thesis aims to give an overall insight into all cases where there has been a revocation.To achieve the protection of a designation as a cultural heritage building, the object has to be of outstanding interest on account of its cultural historic value. In the first part, this thesis gives a short historic background of the cultural heritage law and its terms, like outstanding interest and cultural historic value. The County Administrative Board's documents about revocation are the main source for this research.There have been 24 cases of revocation and the frequency of such cases has increased in the past ten years.

Due to an increased population in cities the need of densification of cities increases. This means that the amount of ecological elements in the city is at risk of decreasing. Ecological services contribute to the city?s climate by softening the negative impacts that densification of cities means. Thus increases the will and ambition in city planning in to preserve greenery.This is an interdisciplinary thesis within the subject of geography that studies Biotope Area Factor (BAF), a planning tool that is used in city planning with the purpose of compensating for lost ecological services associated with new housing estate.

The overall purpose of this essay is to study in which degree the democratic model that is called participant democracy works in the Swedish municipalities. To achieve what I set out to do I will focus on a central political area in which the Swedish municipalities has sovereignty versus the state, in other words in an area where they rule themselves. That political area will then represent how well the participant democracy works in the Swedish municipalities. The research questions then becomes:Does the participant democracy at Swedish Municipality level work in a satisfying way?Does the participant democracy in a large Swedish Municipality in a central political area work?Does the participant democracy in a small Swedish Municipality in a central political area work?Are there similarities and differences between the municipalities?If so, how can that be explained?To answer these questions I will study documents regarding the planning and building area.

Syftet med detta kandidatarbete är att beskriva den befolkningsutveckling som pågår i Sveriges gles- och landsbygder samt att sammanställa metoder från forskning och beprövad erfarenhet som används för att motverka en negativ befolkningsutveckling. Den generella befolkningsutvecklingen i Sverige speglas sedan i Rävemåla, som är en tätortsnära landsbygdsort i Tingsryd kommun, för att undersöka om orten har följt samma bana som befolkningsutvecklingen gjort i Sverige och vilka metoder som används och kan användas för att försöka nå en positiv utveckling. Tingsryds kommun och Rävemåla tätort lider båda av en negativ befolkningsutveckling och en åldrande befolkning. Den mest använda metoden för att nå en positiv utveckling är marknadsföring, vilket är den mest använda metoden i riket för att öka befolkning.

Idag pratas det väldigt mycket om trygghet. Överallt ska det vara tryggt. Vi vill vara anonyma, men vi vill alltid att någon ska se oss för att vi ska känna oss trygga. Därför ökar beståndet av t ex. övervakningskameror.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.