This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

AbstractSkanska Sweden has decided to split the organization that earlier handled both large and small projects into two different subsidiaries. A consequence of this is that all construction service handling will from now on be enforced under the name Skanska Direkt AB. The management of Skanska sees this as an opportunity to develop the organization and in the long term achieve higher earnings.   The task which Skanska in connection with the reorganization wanted to be investigated was a proposal on how the organization of work with the insurance work in the future should look like.The organization that is handled is from production manager to professional workers and includes damage handling that has been obtained from insurance companies in the southern and northern parts of Värmland. The purpose with this work is to present a different kind of view to the problem with developing this branch of the company. The main target was to work out a proposal of an organizational plan for the damage handling in Skanska Direkt AB that is possible to apply, less sensitive for dismissals, results in higher earnings, obtains higher customer satisfaction and also a staff stab that develops their skills at their own.The report and work progressed as following:Opening theory study of strategies to obtain the objectives set.Restructuring of existing organization with theories as support.Interviews with the actors involved to verify feasibility of the developed organization plan  Organization chart, the result of work means that some workers at each location shall be responsible for a small group of workers and work independently. They shall manage the process of invoicing and calculate costs at the same time as they work out on the workplace.

The purpose of this thesis is to investigate how the school as a whole is working with crisis management. The purpose includes examining the readiness of both school teachers and leisure educators when it comes to dealing with crises that children undergo and also to study how they best can provide support for those children. Accordingly, this thesis aims to provide an insight into what the school's work with crisis management might look like. The basis of this thesis consists of six qualitative interviews with a principal, a school counselor, two class teachers and two leisure educators. The study shows that it is important to have a functioning crisis team and a well-made emergency preparedness plan, which the school in this study is considered to have. The crisis group is responsible throughout the crisis work, attends trainings and updates the emergency plan.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

Our everyday life is becoming more active and the activities we perform influence the way we dress. Due to an increase in activities undertaken in an urban environment, demands are changing and the need for active wear that meets the new demands follow suit. The four characters represented in the research can be seen as a reflection of the functional features needed, including base layer, mid layer/insulation and shell.Despite the increase in activities, most of our clothes are still constructed on static dummies or drafted on a table in 2D and the main developments within the active sportswear field is driven by material innovation. By creating garments on a body in movement, my aim is to develop new functions and expression in active sportswear through construction.Construction methods in active sportswear are examined and understood through observations and reconstructions and constitute the foundation of a study of movement for a design recovery.The movement and features required for leading an active urban life sets the direction of the development of new func- tional garments. A series of trial and error sessions and draping fabric on a live model in movement created the prototypes used in functionality tests to establish their feasibility.

Det här arbetets slutgiltiga uppgift har varit att skapa ett första utkast till enövergripande plan för en jämn fördelning av spelmoment för spelet Testament, ett spel som utvecklas för Svenska Kyrkan med syfte att användas inom konfirmandundervisning. Med spelmoment menas exempelvis story, miljö, utrustning och liknande.Arbetet ger inledningsvis en kort översikt över hur leveldesignen inom dataspel har utvecklats och går därefter in på det mer specifika området gameplay progression, utvecklat av Mike Lopez, som ger en översyn över vad som krävs för att skapa ett spel med en jämn fördelning av spelmoment.Därefter används denna metod för att analysera det redan befintliga spelet The Legend of Zelda: Twilight Princess, för att testa Lopez metod, innan arbetet med att skapa en egen plan tar vid.Resultatet av uppsatsen har nått målet med en övergripande plan för en jämnfördelning av spelmoment för spelet Testament, en plan som dock kommer att behöva ses över och omarbetas under det att utvecklingen av det faktiska spelet tar vid, men som ger en bra överblick över vilka delar som fungerar väl och vilka som kan behöva extra arbete i den stundande utvecklingen..

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The purpose of this report was to identify the current waste management of non-hazardous construction and demolition waste in a few Swedish construction companies, based on the different steps in the waste hierarchy with a focus on waste prevention, reuse and recycle. Additionally, the purpose was to attempt identifying opportunities, obstacles and as well as to propose possible solutions from an environmental perspective. The method used was a qualitative study using interviews conducted through emails and phone with employees occupying positions that could answer this reports questions. The results of this report indicates that waste management of construction and demolition waste has improved, and less waste goes into landfills. The concern is that the overall amount of waste being produced is not decreasing, thus calling for actions preventing the production of waste.

The industrialization of construction is increasing in Sweden which leads to higher demands of prefabricated components and cells. But what does the business of construction think of the industrialized business and what can be done in order to decrease faults and errors with these products? Today we have many manufacturers who have different technical solutions which might lead to difficulties when assembling components and cells at the building site. But by trying to make a more opened market, with possibly standardized connections details and improving the communication between the different participants, the prefabricated components and cells can be made and assembled with less errors. This is something that needs to be done in order to establish a more secure business, and especially when working with new companies and methods, when using industrialized products..

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..