Recent years there has been discussed how the critical situation in the housing market threatens the Stockholm region's growth. The thesis objective is to examine whether there is a scientific link between the lack of housing supply and growth. The thesis also intends to identify solutions for increased housing construction, for instance by examining the conditions for a greater regional perspective and influence on the region's housing supply. The thesis empirical study is based on semi-structured interviews with representatives from the Government, municipalities and the housing industry.In Sweden, research on the relationship between housing shortages and growth has not been conducted to that extent it can be said to exist scientific evidence regarding the growth threat. However, in Britain and the U.S, empirical studies show that a lack of housing supply has hindered growth through negative impact on countries' gross domestic product.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Many enterprises have shortcomings in the transfer of information between different departments. Furthermore, routines for maintaining knowledge in order to be able to use this experience in the future are often lacking. Time and resources spent on improving these systems and procedures can provide significant benefits in terms of saved time and reduced costs in the later stages of a project. The benefit of this is not only a greater clarity and a reduced risk of misunderstandings, but also the preservation of knowledge that would otherwise be lost.The aim of this study has been to examine the process of information transfer and the transfer of knowledge between the calculus department and production manager in projects at Erlandsson Bygg i Öst AB. An additional aim was suggestions for improvements in the calculation handover and at the end of a project, where it was possible.The study was primarily conducted through literature studies and interviews.

Språkliga och kulturella skillnader kan leda till komplikationer i den textila tillverkningen med tanke på att kommunikationen mellan beställare och producent ibland kan missförstås. Syftet med denna uppsats är att undersöka hur man, med hjälp av avancerad fotografi, kan förenkla den sömnadstekniska kommunikationen mellan producent och leverantör. Framtagningen av resultatet har gjorts med hjälp av kvalitativa intervjuer med två experter inom områdena fotografi samt produktion. Det har även utförts intervjuer med en inköpsassistent på ett stort internationellt svenskt modeföretag och en intervju med designer/inköpare vid ett mindre företag. Det har vid sidan av intervjuer utförts experimentella observationer där framtagning av en fungerande manual för 360° fotografering har skett.

Denna rapport är resultatet av ett examensarbete utfört vid Luleå Tekniska Universitet på uppdrag av Hägglunds Drives AB i Mellansel. Hägglunds Drives AB är tillverkare av kompletta hydrostatiska transmissioner för industriella driftapplikationer. Företaget har arbetat med att skapa produktionsflöden enligt principerna för Lean Production sedan 2006. Uppgiften för examensarbetet består av att utföra en värdeflödesanalys och målet är att finna ekonomiska, tidsmässiga och arbetsmiljömässiga förbättringar inom: ? Flödet ? Kapitalbindning ? Förenklad planering ? Minskat slöseri ? Sänkta lagernivåer De flöden som ingått i analysen är cylinderblocksflödet och kamringsflödet.

The aim of this study was to evaluate the effects on a simulated wastewater plant regarding GHG emissions and use of energy and resources when implementing source separated wastewater systems. The effects were studied for different restrictions of effluent quality and for different temperatures on the influent. The simulation model BSM2G calibrated for Käppala wastewater treatment plant was used. The task was executed by simulating nine different scenarios with an increase in influent load from new connections equivalent to 3, 10 and 30 % of the present connections. These new connections were served by conventional, urine separated or black water separated systems.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.

Construction production always contains different disciplines whose priorities andinterests can be very diverse. Good communication and coordination are essential tominimize misunderstandings and achieve good quality in the end result. This makesplanning a central part of the production management. In a world where conditionscan change as often as daily, being well prepared increases the opportunities to stayflexible and decrease negative effects of the changes.This study has been done in association with Skanska Foundations district North inStockholm in order to investigate how visual planning can be used in the productionmanagement to optimize the coordination and the quality.The history of Lean started at Toyota, but the concept are now spread over theworld and are used wide outside of the car industry nowadays. What?s challengingabout Lean in foundation projects is to embrace a long-term perspective and invest insolutions that are profitable in the longer term, instead of solve problems by onlytreating the symptoms.A holistic perspective is crucial in order to truly understand Lean.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

Vectors based on lentivirus backbones have revolutionized our ability to transfer genesinto many cell types. Lentiviral vectors integrate into the chromatin of target cells and do not transfer any viral genes causing vector replication. Both of these features arecommonly used in gene therapy and have been used clinically in individuals sufferingfrom cancer, infections and genetic diseases. It has been discovered that T-cells can be genetically modified to be used as effective weapons against cancer: therefore virus mustbe produced to deliver the gene of interest into the T-cells. In this project, lentiviralvectors have been produced to transfer the gene coding for a chimeric antigen receptor(CAR) which is directed to CD19 on B-cells.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

The present project was initiated with the aim to create pattern modules for use in public environments. My intention was to let the properties, of the specific materials used, have a marked influence on the realisation of the final form. I also wanted to find a material, which is suitable from the perspective of sustainabilityand possibilities to create modules from it. The work was initiated with a study of some candidate materials and many sketches before I finally made my choice. My decision was clear after a visit to the company Glasfabriken inKalmar.

My main purpose with this paper of John Steinbecks Of mice and men is to both analyze the long-lived structures and the unique individual destinies of the novel. I employ the method of the historical Annales-movement and use three divided levels in my analysis to try to capture these high structures and low moments of humanity in Structure, Konjuncture and the Individuality. The first level, Structure, is used to see how long-lived almost invisible geographic structures set the human act of condition. The second level, Konjuncture, is easier to grasp in understanding of time and embraces for example economic structures as the industrialism. The last level of Individuality is the fastest in time and easiest to understand but in the long run also the least important.

This essay describes and compares the extensive reindeer management to the more intensive, but grazing based, sheep management system in Sweden. Differences and similarities between the two production systems will be investigated by elucidating the economy, land use and possibilities to influence production and economy through breeding, feeding and product development. The reindeer management area covers the northern part of Sweden whilst the sheep management is dispersed over the country. Both reindeer and sheep are ruminants and have relatively high demands on the quality and digestibility of the feed however reindeers graze on mountain-and forest lands whilst sheep often graze inaccessible areas or cultivated grasslands. Selection intensity is generally lower in the reindeer management compared to the intensity in sheep breeding.