The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

Nowadays, a lot of resources are spent on developing systems that will make it possible forvehicles to act autonomously, and make them more effective. One of the projects that isworking on this is the Gulliver Project. Gulliver has constructed a number of miniaturevehicles equipped with various sensors, to use as a physical testbed for autonomousdriving. One big disadvantage with this method is the long iteration time that occursduring the development and testing of a new software.This project has improved this process by developing a system architecture of a virtualtestbed where it is possible to simulate autonomus vehicles that communicates throughany type of wireless network. The testbed has made it possible to simulate autonomusvehicle systems that with a reasonable margin of error, acts like the system would actin a physical test.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

I detta examensarbete har ett system för navigering och styrning av ett autonomt fordon implementerats. Syftet med detta arbete är att vidareutveckla fordonet som ska användas vid utvärdering av banplaneringsalgoritmer och studier av andra autonomifunktioner. Med hjälp av olika sensormodeller och sensorkonfigurationer går det även att utvärdera olika strategier för navigering. Arbetet har utförts utgående från en given plattform där fordonet endast använder sig av enkla ultraljudssensorer samt pulsgivare på hjulen för att mäta förflyttningar. Fordonet kan även autonomt navigera samt följa en enklare given bana i en känd omgivning.

Detta arbete täcker utvecklingen av ett hemautomationssystem som tillåter hushåll att sänka sin elkonsumtion och miljöpåverkan. Samtidigt som det ger den boende ett sätt att spara pengar samt ett bekvämt sätt att fjärrstyra sitt hem.Arbetet utvärderar också vilka delar som är viktiga för att i framtiden hitta en lösning som täcker alla problem med det utvecklade systemet.Systemet består av en nätverksenhet som vidarebefordrar signaler/meddelanden till en s.k. fjärrströmbrytare för att kunna kontrollera t.ex. lampor och värme i ett hus. Den kan också ta emot data från sensorer och skicka denna tillbaka till användaren.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

This master thesis includes a description of how a number of sensors are put together in a sensor platform. It also gives a description of how localization and mapping has been performed with data collected from the sensor platform. Localization is a prerequisite for most of the tasks that can be requested from an autonomous mobile robot. In many situations the GPS signal is not available and hence an additional localization system is required. One approach is to apply localization based on landmarks extracted from the robots surrounding.