AimThe aim of this study has been survey the possibilities for short-term stays in the Stockholm Archipelago for people without their own means of transport, own equipment and/or experience of outdoor life.To fulfil this aim, the following questions were formulated:? What communications are available to chalet parks in the Stockholm Archipelago?? What overnight accommodation is available in the chalet parks in the Stockholm Archipelago?? What activities can be pursued in the Stockholm Archipelago?? What is the financial cost of travelling to and staying in the Stockholm Archipelago for a week?MethodWe chose to use six interviews and three observations in order to gain as much insight as possible. Interviews were conducted with Claes Petterson at Waxholmsbolaget, a company that provides transport services in the Archipelago, and with managers for five chalet parks: Rolf Andersson for Finnhamn, Per Englund for Grinda, Arne Johansson for Rånö, Pär Hjärtström and Peter Hösöyen for Gålö and Anders Bedinger for Gålö and Nåttarö. The interviews were recorded in writing and on tape. Observations were carried out at three chalet parks, i.e.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

AbstractThe development of the construction industry is slower compared to other industries. This implies that there must be improvements in this field. One step to increased effectiveness in construction projects is making the construction process more efficient, therefore resulting in a positive result for both the actual construction project and for the overall branch. The purpose of this study is to identify areas for improvement within the municipal housing company Gavlegårdarna completed construction project, who will then contribute to increased efficiency in their upcoming projects. The work has been performed with the help of two case studies examine construction projects "Fullriggaren" and "The three nursing homes." Opinions about what could have improved the efficiency of these construction projects further have been collected with the help of an interview study among some of the project participants involved in both projects.There have been many studies addressing the topic of how the construction process can be streamlined and similar studies that have been previously conducted.

The aim of this thesis is to investigate how the literary site Vulkan.se affects the conditions for publishing, distribution, incorporation in value systems and feedback in the literary process, as it appears in Lars Furuland?s model of this process. The purpose is also to propose an updated version of the model. This is achieved through a qualitative testing of Furuland?s theory.

The purpose of this paper is to critically examine and question the use of mindfulness in the workplace. Mindfulness in the workplace can be understood as an organization recipe and is now a so called trend. We believe that there may be an issue of how mindfulness at work is advertised when it is described in such a way that it could be the solution to many organizational problems, such as reducing stress, increasing efficiency, creativity and productivity. To get a better understanding of what mindfulness is and what it can bring to a stressful work, we conducted semi-structured interviews with four mindfulness instructors. We analyzed the interviews from a theoretical analytical framework consisting of both a constructivist perspective and a power perspective.

This thesis work resulted in a template for how the thermal spray process can be controlled through robot programs. The robots today and their programs need to be replaced, therefore a new structure which can be matched with the new robot systems is needed. The work is limited to only concern structured programming on the new robots on Thermal Spray Centre (TC) with the programming language Rapid. The basic data for the program was retrieved from interviews with concerned personnel at TC, from studies on process parameters for thermal spray and from existing specifications at Volvo Aero Corporation (VAC). The thesis work briefly describes the process thermal spray and the four methods used at VAC.

Under senare år har allt fler organisationer och företag insett hur viktigt det är att identifiera och förstå sina processer, och för att kunna styra och utveckla dem, är det bra att veta vilka de är. Därför vill Reumatologi kliniken veta vad som händer med patienter som har psoriasis artrit, när dem är nyinsjuknade eller ska börja behandlas på deras klinik, samt hur hanteras smärtproblematiken, när de återkommer till kliniken, detta har vi gjort genom att kartlägga processer och sammanställa på vilka olika sätt dessa patienter hanteras på kliniken idag, vart remitteras de? Hur ofta förekommer detta? Vad gör att vissa remitteras och andra inte? Förslag på hur kliniken kan använda denna kartläggning i framtiden.Detta examensarbete genomfördes på uppdrag av:Centrum för Teknik i medicin och hälsa, CTMH, i samarbete med Karolinska Sjukhuset. Arbetet omfattar 15 högskolepoäng.Vid detta arbete har vi använt oss av djupgående intervjuer för att få en djupare insyn i den reumatologiska klinikens handläggningsprocesser. En konstruktionsmodell har utvecklats för att identifiera vilka intervjufrågor som är relevanta för detta projekt.

Forensic psyhiatric care protects the society by giving patients care to diminish risks of serious crimes. In their work the nurses use different care methods to help and support the patient in managing his or her life situation. To clarify how a group of nurses describe the nursing process in forensic psychiatric care. A qualitative study based on interviews. Six nurses were interviewed about their work in four different forensic psychiatric care units.

AbstractNowadays, companies and organizations manage large amounts of data to be used as support in decision making. A good solution for data management is in the form of data warehouses. A data warehouse is used to gather information from multiple sources within a company and arrange the information in a way that makes it easy to retrieve and analyze. Designing a data warehouse is not a simple task. The study herein will focus on what a data warehouse is and how the ETL process is used for data storage in the data warehouse. ETL stands for Extract, Transform and Load and is the process that retrieves data, transforms it and finally loads it into the data warehouse.

This paper describes the integration of environmental assessment in Swedish municipality comprehensive planning through a chosen case study. The implementation of a new EGdirective in Swedish law, concerning Assessment of the effects of certain plans and programmes on the environment, should lead to some changes in the way Swedish municipalities' deals with environmental issues in their comprehensive plans. This could later on lead to new preconditions for municipality comprehensive planning. The purpose of this study was to investigate how the planning organisation in the municipality adapts to new regulations for impact assessment of comprehensive plans required by the Planning and Building act. Secondly the purpose was to partly participate in the early stages of the planning process and thereby indicate and identify possible environmental impacts regarding the aspects of land and water. This was done as a case study in a well defined part of the process.

The decisions for investment are forward-looking and the base of a long-term strategy. The research within investment have focused on diverse formulas which are used in financial assessment, which also should be complemented with qualitative evaluation. Consequently, the focus should not only be on the execution of the formulas. Less time have been spent on research concerning what actually initiates the investment proposals and affects the decision-making. This will be highlighted in this essay.

This Master thesis is about how to involve young people in a creative process. The aim is to see what methods can be applied to make them reach the kind of knowledge they need to be able to contribute to the creation of a memorial place. Issues such as if a place that displays death has a right to exist in an urban environment or why young people should be involved in the creative process are brought up and discussed in this thesis.The memorial place that the young people contribute to is unique, in some sense, due to it not commemorating any special event or person. The purpose of the memorial is rather to serve the public when larger catastrophes occur or to serve individuals who do not have a grave they can visit to commemorate their loved ones. The idea is to place the memorial in an urban setting in the city of Borås.In this thesis the process that the young people participate in is reported in a form similar to a diary where the reader can follow the developments of the young participants, from how they gain knowledge to how they develop their ideas.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

In game development, performance is everything and the Playstation 3 provides a unique platform for utilizing parallelization of code to achieve extremely high performance. In this master?s thesis the issue of animation with smooth skinning is migrated from being a GPU process to becoming a parallelized and 358% faster process. This method is incorporated in an existing commercial game engine and integrated in a currently in development title for the Playstation 3. An in-depth study covers parallel processors, the CELL processor, used in the Playstation 3, and how contemporary industry leading game developers are utilizing the same unique architecture to increase their own games? performance..