The intention of this essay is to describe the problems with loss of books at three Swedish University libraries. It?s based on interviews with librarians. The library codes of ethics, the library law and the terms of reference of the libraries are central for my understanding. Interview results: Little was being done to stop theft.

The purpose of this study is to examine what motivates people to help others at risk to themselves. The focus is on international aid workers, which in their work put themselves in situations of risk. Earlier research shows that international aid work involves risks such as infectious diseases, violence, death threats, assaults, constant insecurity and risk to be traumatized etc. There is not much research done on what motivates to help others in spite of risks, hence we find this an interesting area. We have interviewed six respondents about the content and character of their motivation and factors that are important for the maintenance and development of this motivation.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

The public sector has through the years been exposed to a rather radical alteration. The aim with this alteration has been to make the public sector more effective. It?s a dynamic society that Norrbottens läns landsting (NLL) operates in today and it is therefore of great importance that the managers get a solid foundation to rely on, since they have a central role in the ambition for efficiency. Another reason to educating the managers is that NLL can secure the future pension losses.

This essay includes the planning and designing of a house as well as writing a rapport about howto increase fire safety in small buildings.More than 6000 homes burn in Sweden every year (Brandskyddsföreningen, 2012c). Thedevastation and the costs are usually very high. This report examines possible measures to reduceboth personal injuries and economic losses resulting from house fires in small buildings.Swedishbuilding regulationsplay a major role when it comes to constructional fire safety. However therequirements inSwedish building regulations are very low for small buildings and this is anargument for raising the requirements.The report shows and describes possible methods to build safer with regards to fire in terms ofmaterials and different building structures. Major focus has been on fire cells but other solutionsare also examined and described.

Effects of climate change, urbanization and global homogenization are resulted in the degradation of land and losses of natural habitats. Ecological design integrates nature into urban environment by respecting natural ecological principles and processes and creating resilient urban biotopes which also can be used by local urban communities. The aim of the thesis is to answer the research questions: How ecological design principles can be applied for re-design of Toledo Riverfront (with requirements of the design competition)? and What is the ecological design in landscape architecture? I participated in the USA design competition with the aim to create a vision and redesign of Toledo Riverfront in Ohio State, USA. The site is located in the south point of Lake Erie. As a result of a long industrial activity, riverfront of Toledo had been transformed into inaccessible and abandoned brownfields. In my proposal I applied ecological design principles on three scales: the city of Toledo by reinforcing of ecological connection and creating green corridors along the river; the intermediate scale by suggesting public parks along the river front and on the fine level by proposing detailed design including remediation of the site and use of dredged material.

The purpose of this study is to show what melancholy and irony in my poems express and what techniques that are used to accomplish these effects. Many theorists, among them Sigmund Freud and Julia Kristeva, characterize melancholy as an experience of loss, and therefore one of my questions is what kind of losses appear in my poetry. In search for an answer I analyze the texts from both a psychoanalytic and a sociological point of view. In the latter perspective I discuss the postmodern society using concepts from contemporary thinkers like Zygmunt Bauman, Fredric Jameson and Jean Baudrillard. Finally, I also examine if melancholy has an influence on the form of the poems.

Phosphorus (P) is an essential nutrient but a surplus could lead to eutrophication. Furthermore, the minerals used to produce the mineral phosphate is a non renewable resource. There are in other words several reasons to reduce the leakage of P and the agriculture is one important area to attend. The aim of this work has been to investigate if carbon-rich arable soils content contain more P than arable soils with low carbon content. Moreover it has been calculated if the carbon-rich soils could pose a risk of P leakage by comparing their delivery of P with the plant uptake. The work has consisted of compiling the results from former gathered and analysed soil samples of 130 Swedish arable soils. The fractions of P considered are water soluble P (Pw), ammonium lactate-extractable P (P-AL), hydrochloric acid-soluble P (P-HCl), organic ammonium lactate-extractable P (Porg-AL) and inorganic ammonium lactate-extractable P (Porg-HCl).

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

The Swedish wolf population is like continue to grow and this will eventually lead to an increase in the predation of livestock. In Sweden carnivore attacks happen most frequent on sheep farms and the majority of these attacks are performed by wolves. Because of this, the main focus in this study is on the sheep and wolf problematic. It is not only the direct killing of livestock that affects the animals and their owners in a negative way. It has also been shown that livestock that lives close to carnivores sometimes change their behaviour in a way that will affect their ability to reproduce and to forage efficiently.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

This thesis analyzes the effects of different fertilization strategies on forest management at Holmen Skog in Umeå district. Harvesting volumes, net present values and fertilization intensity are presented for each fertilization scenario. The planning reserve (percentage area older than minimum final felling age) was also analyzed in this study.The thesis covers the analysis of five different fertilization scenarios, varying in fertilization intensity, from no fertilization at all, to fertilization at every harvesting operation (thinning or final felling). A sub-study was also carried out so the reader in detail can see how the different fertilization scenarios affect individual forest stands of different nature. The analysis has been done with the planning tool PlanWise, which is an application of the Heureka analysis and planning system.