Every year, pesticides are found in surface and ground waters in Sweden. Fungicides are in common usage and applied in high amounts against potato late blight. The present thesis examined the possible removal of four fungicides (metalaxyl, cyprodinil, propamocarb and mandipropamid) from water using the microalgae Chlorella vulgaris. Microorganisms are capable of decomposing a range of organic pollutants and the main focus in previously published studies has been on bacteria and fungi. Microalgae are mostly studied due to their high capacity in biosorbing heavy metals.

Milk allergens were digested by allowing them to flow through a chromatography column, where pepsin was conjugated to the stationary phase of the column. The allergen fragments were then characterized both biochemically, by using SDS-PAGE and gel permeation chromatography, and immunologically, by examining their reactivity to IgE and monoclonal antibodies..

The purpose of this study was to examine the extent to which incontinence aids, used in local authority/municipal nursing homes, were adapted to the resident?s urine-leakage volume and to find out how nurses perceived the current situation concerning individual testing of incontinence aids in municipal nursing homes. The study method was a quantitative empirical study and was carried out in two phases. The first phase was a weighing test, carried out in three nursing homes, whereby the incontinence aids used by 25 residents during a 48 hour period were weighed. The second phase was the completion of a questionnaire by the municipal nurses working in the same local authority.

Due to the globalization and the changes in the market, companies have now realized the importance of a strong brand. This has led to the phenomena outsourcing. The relation between the branding consultant and his or her client has changed. Earlier the consultants worked as a single unit and were given a task to independently accomplish the assignment. Today there has to be co-operation between the two parties.

Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.

Ever since ABB has begun diecasting their rotors instead of permanent mold casting it,variation in the quality of the cast has arisen. Diecasting is performed in three differentmachines, M1, M2, M3 with 400, 660 respectively 800 tons of die locking pressures.The aim of this thesis is to answer the following questions:What is the ?right? cast quality? How is the right quality achieved?For sizes 160-180 solutions will be proposed that consider eccentricity between thelaminate and the short circuit ring as well as elimination of the thin Al film that appearson the outer periphery of the rotors.Through considering the statistic material the most often diverging rotor type has beenidentified and one of the actual rotors has been sent to a laboratory to be analyzed inorder to establish the current defects. The result of the analysis shows that there areplenty of gas- and oxide-porosity.It has been proved that every time the dies temperature decreased below 120°C thecontent of gas porosity increased. It is due to rapid solidification of metal that flowsthrough the ?cold? laminate.It has confirmed that enhanced porosity in squirrel cage causes high impedance in therotors.

The aim of this Master's thesis is to examine the contemporary educational tasks of the Swedish public library as they manifest in Swedish library journals. Our main question at issue is: Which educational discourses are there? And in relation to our main question: how do the concepts of information literacy, lifelong learning and adult education relate to each other? Is there an antagonism between the public library's duty to supply fiction as opposed to non-fiction? and: What are the consequences of these discourses in the service provided by the library?Our theoretical starting-point is the discourse theory as proposed by Ernesto Laclau and Chantal Mouffe. We analyse 39 texts from four Swedish library journals: Ikoner, bis, DIK-forum and Biblioteksbladet. The analysis is done in two phases.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

The aim of this paper has been to examine personas role in the development phase and whether or not some of the criticism that have aroused against personas is valid or not. In this paper we examine the benefits as well as the downsides of working with personas both from a scientific point of view but also from the experiences of a small company located in the north of Sweden. Since personas much like many other powerful tools have pit falls aswell as do's and don'ts this paper looks to clarify what role personas should take aswell as how to minimize risk and maximize the usefulness of personas..

AbstractThe purpose of this essay was to determent if the authors? idea to replace a personal trainer with a training program, which is provided by software, is viable and if there is a market for such a product. The method that was used, included eight people who enrolled in a training program which were designed by the authors in Microsoft excel. The programs were based on principals of periodization, and included the phases: anatomic adaptation, hypertrophy, maximum strength and muscle definition. The training program was personal and based on individual goal setting.

Large quantities of chemicals are used in all areas of society. The chemicals can be toxic and dangerous for the environment if used incorrectly. To protect people and the environment from dangerous chemicals, a good control of them and an active work to phase out hazardous substances in all areas where chemicals are present, are needed. Banverket and Vägverket handle in production a wide range of chemical products. Many of the products are dangerous to the environment, for those who work with them and to others who may come into contact with them.

Abstract          Background: End of life is difficult to establish in patients with dementia and many patients die due to complications related to the disease. To document that care are palliative in this group of patients is not common among nurses and physicians. This may depend on that the palliative course is extended and not similar to the palliative course common among patients with cancer. Aim: To describe how the registered staff in nursing homes document the care of persons with dementia in a late palliative phase. Method: A retrospective record study with a deductive approach.

Our bachelor thesis is a visualisation made in 3D-graphics of how the horserace track in Tingsryd perhaps will look like in the future, complete with a miletrack, steeplechase, and other horserace courses. Today, the race track is only in it?s building phase. The inner field-group in Tingsryd needed presentation material to show their eventual sponsors, so they contacted us at Media Technology, and we instantly decided to give their idea a try..