This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has  been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..

Warehouses are a key aspect of modern supply chains and play a vital role in the success or failure of businesses today. Figures from the USA indicate that the capital- and operating costs of warehouses represent about 22 % of a company?s logistics costs while figures from Europe indicate 25 % (Baker & Canessa, 2009). Because warehousing is such an important function within a company, the authors chose to focus on this in their thesis. The purpose of this thesis has been to examine the significance of a Warehouse Management System (WMS) and item identification with attention to logistic efficiency.

This thesis researches the construction of the Swedish masonry heater called r?rspis. A r?rspis has an inner smoke channel system that stores heat and it was developed in the early 19th century alongside the Swedish kakelugn (tiled stove). Unlike the tiled stove, the R?rspis was commonly found in simpler environments and is part of the cultural her itage of the rural population.

Who has the ownership of a company´s long-term strategy, and who should have it? Is it the board of directors or the senior management? Swedish law and regulations seemingly point in one direction, whereas the findings of studying the relationship between CEO and chairman of the board in eleven Swedish listed large- and mid-cap companies, point the other way. In a majority of the companies the senior management have the ownership of the long term strategy whilst the board of directors merely hold a control function. The possible effects on the companies managed as well as the rules and regulations they are managed according to, are analyzed..

Man spends most part of the day at work and is therefore influenced by it?s ambience. That?s why it?s important that the environment at work is health promoting and can function as a supportive environment. The purpose of this study was to describe job satisfaction among employees and to analyse a possible connection between job satisfaction and employees experiences of SOC.

The purpose of this essay is to shed light upon the ecumenical work that has been done between the Church of Sweden and the Mission Covenant Church of Sweden. The recent years of work have led to a recommendation for a certain degree of fellowship to be established between those churches. This proposal as well as other documents are analysed in the essay from an ecclesio-logical point of view, to find out how the Church of Sweden looks upon itself in meeting another church.To structure the material, the essay has been subdivided into seven parts that is related to ecclesiology. In those seven chapters the positions of the Church of Sweden and the Mission Covenant Church of Sweden are given individually as well as in common. Questions like the im-portance of dioceses, local congregations or parishes and the national level are described.

Softube has developed DSP-card and software for simulation of the sound of old tube amplifiers. The purpose with this thesis is to design a compact amplifier with high power to function together with the DSP-card and build a unit that can replace several other guitar amplifiers. The advantages with that kind of solution could be that it would be cheaper, easier to carry and easier to stor than the real amplifiers. The amplifier that has been designed is of class D type with digital PWM modulator. There is several types of amplifier modules on the market that use analog input signal, but if one of them would be used a D-A converter is needed on the DSP card.

Small pieces of plastic, termed ?micro plastic? in the oceans derive mainly from degradation of big plastics such as beach littering, but also from sources of direct emission from e.g. beauty scrubbers and synthetic sand-blasting. These micro plastics are ingested by marine animals ? mistaking them for plankton ? or via prey.

In this project I have worked with porcelain och and porcelain decors. The project was based on questions like why porcelain is such a richly decorated product and how you can maka a shape and a decor feel like a entirety. In December 2009 I went to China in search for answers and to study porcelain decors. This trip has been my inspiration throughout the whole project and also the main theme for the idea, the shape and the decor. That is why I decided to make a teacup with a plate that also has a function as a lid.As I first started working with the shape I was thinking to make a rounded teacup, inspired by the chinese rice bowls, but since I had to produce the porcelain by myself I decided to make a much more simple shape.

Narratives about UFO:s and extraterrestrials can be regarded as part of an everyday religiosity, yet the issue has been poorly studied outside an American context, within the discipline of Religious Studies. In this paper, I therefore seek knowledge about the further development of these narratives within the Swedish UFO-movement from the 1960?s until today. Influenced by social anthropologist Claude Lévi-Strauss´ discussion about mythems as the smallest components of a myth, I argue that the stories which emerge within the Swedish context differ from the American ones. This difference consists of both loss of certain mythemes and the addition of others to this mythic complex.

Harmonics are a well-known problem that has to be dealt with in the design of thegenerator. Internationally accepted standards limits the amount of harmonics allowedin the no-load voltage. These limits can be difficult to fulfill with integral slot winding,where the number of slots per pole and phase is an integer. The presence of thedamper winding often makes the problem with harmonics even worse and harmonicswith frequencies of order 6q±1 arise with significant amplitude. How the damperwinding is designed affect the content of harmonics in the no-load voltage and the aimwith these ? has been to investigate in which extent design of the damper windingaffects the contents of harmonics.Simulations with the 2-D finite element method have showed that if the damper barsis centered in the pole shoe, the amplitude of the harmonics of order 6q±1dependsboth on the ratio between the stator slot pitch and damper bars slot pitch and if thedamper bars are connected between the poles or not.If the damper bars is displaced with ¼ stator slot pitch alternately, the amplitude ofthe harmonics of order 6q±1 is reduced and the influence of the ratio between thestator slot pitch and the damper bars slot pitch will vanish.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

This project is a study in how to represent the Swedish magician and variety artist Carl-Einar Häckner in a web-based environment. With a starting point focusing on illustration I wanted to produce a web environment that would function as a prototype for a webpage. My personal aim was to explore and gain new experiences from working in a digital interactive environment. I wanted to use animation and illustration to create an atmosphere and communicate emotions, and in the end find out a way of how to integrate that with a more text based content. The project is a personal project based on my interpretation of the work of Carl-Einar Häckner and an effort to translate Häckners expression and the emotions he evokes in his variety shows into image..

Full-field flash electroretinography is an electrodiagnostic method used to examine the function of retinal cells. Light stimulation of the eye elicits electrical potentials in the retina. By aid of a corneal electrode and a reference electrode close to the back of the eye, the electrical potentials can be recorded and presented as an electroretinogram (ERG). ERGs driven by mainly one type of cones can be used to examine the function of a single cone class. In human beings, studies have shown the cone class sensitive to light of short wavelengths, the S-cones, to be more vulnerable to acquired damage than the other cone classes (Daley et al., 1987; Gouras et al., 1993; Greenstein et al., 1989). Dogs have two cone classes, S-cones, and M/L-cones (most sensitive to medium to long wavelengths).

Our thesis is conducted in collaboration with Draper Europe AB in Halmstad.The goal of the project has been to construct a baseline concept for the instaling of aprojector screen. Draper Europe AB, in the curent situation, have several kinds of fabrics and designs on their sceens and the cases they are in. Today if you select a screen you can´t chose the design and function of the sceens case.The arrangement of the components inside the cases was to be constructed so the assembler simply could move them to different cases. To make it even easier for the assembler and to save time, the desire of less component was mentioned. Another problem that needed to be solved was the mounting of the projectionscreen at the customer place.