Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

This paper is about how transport companies in the future will be able to adapt their activity to an environmentally sustainable development without the effect of negative company economic consequences. Today, the environmental threat is a global problem and knowledge about that effluent of carbon dioxide have a negative impact on the climate is generally known. A transport system that works well is important for Sweden, but the sector has a negative impact on the environment. Regulation and legislation for increased environmental requirements often meets resistance and fear that the work will be hampered by increased costs for environmental work that can lead to an international decrease in competitiveness. The transport companies have outside pressure from the society to do something about the environmental issue, however the companies? customers are not ready to pay a higher price for environmental work.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

The aim of this project was to develop a numerical model simulating the global transport of air pollution. The model currently used by SMHI, the Swedish Meteorological and Hydrological Institute, was intended to perform such simulations at regional scales. However, the usage of a grid based on longitudes and latitudes makes this model work poorly in global simulations. The problem with this grid is that the nodes are concentrated near the North and South Poles. Due to this characteristic, the Courant, Friedrich and Lewy-condition for numerical stability puts a sharp bound on the timestep length.

Headwater streams are affected by anthropogenic impacts at multiple scales. One aspect of human impact is sediment transport associated to the abundance of stream structures as large woody debris and the composition of the riparian zone from forest to agricultural landscapes. Riparian buffer zones and stream structures like dead wood are considered as generally important structures for protection against an increasing amount of sediment particles in the water. Hence, in this study these structures were quantified in thirty different stream segments on land and in the water. To measure the transport of sediment Whitlock-Vibert boxes were used in three different types of landscapes; forest, transition and fields. The boxes were left in the stream segments for three months, the taken up and dried and weighed. The results showed that the transition-land in Frösvidalsån had the highest sediment transport. The second highest transport of sediment was in Blackstaån at the fields.

Handling, loading, transport time and unloading in connection to transport of farm animals affect animal welfare. Induced effects include both psychological and physiological stress responses in animals. The physiological parameters may be measured through blood analysis while behavioural changes often manifest themselves through increased vocalisation, escape attempts and apathy. Physiological parameters are additional parameters of importance when measuring animal stress responses. The handlers behavior during transport has been shown to have major impact on animal welfare and the quality of meat. Animal friendly handling and driving of animals create a more manageable work environment for the handlers. To further increase animal welfare in connection to transport, stables should be built with well adapted drift passage and ramps on the transport vehicle.

The need for roundwood transport capacity vary throughout the year. The need during a period is influenced mainly by the volume transported the period, the number of days during which transport can be carried out, seasonal variations in road conditions and the weight of the roundwood, and the origin of the wood (private forest owners/ forest companies). The need for transport capacity generally increase during the winter and in spring, after thawing. Lack of logging trucks combined with a lack of drivers for these trucks make it hard to hire extra help during periods of increased transport capacity needs. It is also very expensive to keep logging trucks for use only during these periods. In this thesis, two new concepts based on the partial transport by truck tractors have been examined, to find out the possibility for increased performance and flexibility.

Transportation constitutes a large part of the forest industry's raw material costs. Transport also contributes a significant proportion of the carbon dioxide emissions. In order to reduce both the cost and environmental impact different types of decision support are required. These, in turn, require extensive information about the road network and correct information on road path selection and transport distances. In the development of national road data base for forestry (SNVDB) a road selection application has been included.

?ÄTA-work? (Changes, Supplementary and Retiring works) is more or less common in all construction projects whether it is about houses, roads or railways, in the planning stage, or in the construction stage. For the Swedish Transport Administration, which is the largest purchaser of infrastructure in Sweden, ÄTA-work is a hotter topic than ever.Economists and managers want to draw conclusions on the projects share ÄTA-work, while the project manager is concerned about whether it is possible to draw any conclusions at all as each project is unique in itself and has its own merits. There is a big variation in the amount of ÄTA-work in different geographic districts in the Swedish Transport Administration.This study shows that the Swedish Transport Administration does not have a unanimous approach regarding the management of ?ÄTA-work?.

Kan man förhöja hela upplevelsen av att resa kollektivt genom att förändra textilierna i denna miljö? Hur anpassar man sin estetik till en miljö som är så hårt utsatt för smuts, slitage och skadegörelse? Kan man genom att förändra textilien skapa en bättre relation mellan passageraren och sätet?Textile design for public transport..

During the transportation of logging residues (LR) the material´s low density is a problem that results in low use of pay-load capacity. Comminution or compression of LR are possible methods to increase pay-loads. In the present thesis studied a bundling machine which was mounted on a truck chassis, and the subsequent transport and crushing. The truck bundler created bundles that were larger and longer than other bundling equipment on the market. The objectives were to determine the total time consumption and its allocation over work element and machinery, to measure dry matter (DM) content of green and brown LR-bundles.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

Hästar har transporterats längre sträckor i århundraden, först med båt och tåg och därefter på väg och med flyg. Antalet hästar som transporteras på väg har ökat i takt med att antalet hästtävlingar har ökat. Syftet med denna litteraturstudie var att ta reda på vad som kan göras för att förhindra och åtgärda de störningar som kan uppkomma i vätske- och saltbalansen i samband med transport genom bland annat utfodring och bra rutiner. I studien ingår även en presentation av gällande regler för transport av häst. Hur hästen ska transporteras är reglerat i djurskyddslagen (SJVFS 2000:133). Transporttiden får högst vara åtta timmar därefter måste hästen vila.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

In Sweden, there an increasing need for transport and this leads directly to fuel demand of the transport sector is expected to increase. Both politicians and industry believes that renewable fuels are a realistic and significant method to reduce the transport sector's environmental impact. This study aims to document the Swedish haulage contractor?s attitude to biodiesel. Also to document the strengths and weaknesses of biodiesel, based on opinions from the ultimate consumers.