On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

AimThe aim with this study was to acquire knowledge of mental training and if you can use it in the elementary school to increase in a short period of time the performance in a coordination test. Furthermore we wanted to investigate teachers understanding of the possibilities to perform this kind of training in the elementary school, and if there is support for this in the school regulation.MethodAs method we have used a combination of a literature pre-study, interview and at the end an experiment. Before the experiment and interviews could take place we studied literature about mental training to get a basic knowledge of the subject. The facts we learned from our pre-study and interviews gave us the base for our experiment. The experiment group included 23 pupils in a third class at school situated in Stockholm.

In some herds it has been observed that extremely short teats have become a problem; with a negative influence on the milking performance. The aim of this study was therefore to investigate to what degree the quality of the teats and the milk in cows with short teats is affected as compared with cows with normal teat length and furthermore if the milking performance could be improved by using a liner adapted to short teats. This study was divided in two parts. In the first part, it was examined if there were any differences between short teats and teats with normal length with reference to the milking performance, udder emptying, teat treatment, milk quality, and udder health. 11 pairs of cows were used and in each pair of cows one cow had teats shorter than 40 mm while the other cow had teats longer than 50 mm.

Examensarbetet handlar om en jämförelsestudie av beräkningseffektivitet med avseende på energi- och tidsförbrukning mellan grafikkort och processorer i persondatorer och PlayStation 3.Problemet studeras för att göra allmänheten uppmärksam på att det går att lösa en del av energiproblematiken med beräkningar genom att öka energieffektiviteten av beräkningsenheterna.Undersökningen har genomförts på ett explorativt sätt och studerar förhållandet mellan processorer, grafikkort och vilken som presterar bäst i vilket sammanhang. Prestandatest genomförs med molekylberäkningsprogrammet F@H och med filkomprimeringsprogrammet WinRAR. Testerna utförs på MultiCore- och SingleCorePCs och PS3s av olika karaktär. I vissa test mäts effektförbrukning för att kunna räkna ut hur energieffektiva vissa system är.Resultatet visar tydligt hur den genomsnittliga effektförbrukningen och energieffektiviteten för olika testsystem skiljer sig vid belastning, viloläge och olika typer beräkningar..

Många av de verktyg som används för mätning och styrning av prestationer i offentliga organisationer är hämtade från privat verksamhet. Dock har offentliga organisationer ofta andra typer av mål och styrning än privata företag, vilket försvårar måluppföljningen. Denna uppsats syftar till att få en förståelse av Trafikverkets användning av prestationsmätning samt tillämpning av mål- och resultatstyrning. Vidare kan studien ge ett bidrag till ökad kännedom kring hur mätning och styrning av prestationer sker inom en statlig organisation. I en fallstudie som innefattar intervjuer och dokumentgranskning studeras hur mätning och styrning av mål fungerar i Trafikverkets största investeringsverksamhet.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

SAAB Automobile ABis a car manufacturer within General Motors corporate group. SAABAutomobile ABhas a big part of the responsibility for the brake development in the corporategroup. The car industry is facing harder environmental requirements, which influence the brakedevelopment. The focus is to develop brakes with low drag and sustained brake feeling andperformance. Important characters for the brake caliper are high stiffness and low weight, highstiffness results in high performance and low weight is important because it is unsprung mass.This thesis investigates the possibility to improve the performance of the brake caliper for aGMproject.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.