The paper aims to examine how well a small group unaccompanied children have established themselves in Swedish society. In order to determine how well they have established the empirical material which is primarily based on quantitative data has been measured with a theoretical model developed by the theorists Nancy Fraser and Alistair Ager and Alison Strang. Based on the theoretical framework the unaccompanied children establishments have been measured in example income, education, debts with Kronofogdemyndigheten and social network. It was found that the unaccompanied children had not achieved the establishment in the society that was expected from the theoretical framework. Their results were also generally below the national average for young adults in Sweden who are the same age.

Syftet med examensarbetet är att hjälpa ett företag med att införa standardlittera för deras prefabricerade betongelement som ingår i deras Konceptet. Införandet av standardlittera ska resultera till att återfinna och gruppera deras betongelement i CAD-systemen. We did our thesis project at one of the most prestigious Swedish construction companies. We have examined the possibilities of doing sandwich elements to standard elements which would increase the degree of industrialization. The company has developed a concept that is based on a more refined process of industrialization.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

Många studier visar att det finns en skillnad mellan sjuksköterskans bedömning och patientens upplevelse av smärta och smärtbehandling. Syftet med litteraturstudien är att jämföra dessa uppfattningar. Eftersom god smärtlindring är en förutsättning för patientens psykiska såväl som fysiska välmående är det av stor vikt att sjuksköterskans bedömningar är så korrekta som möjligt. Förutom olika smärtskattningsmetoder, ex. VAS skalan är det nödvändigt att sjuksköterskor medvetandegörs om sina egna attityder, då dessa kan påverka kvalitén på omvårdnaden.

In this paper, a small business network with around 30 users is analyzed with respect to security, performance and usability. Based on this analysis, two suggestions on how to solve the problems listed are given. The first suggestion focus on keeping a low budget, while the other tries to deal with the problems more thoroughly. One advantage of the first suggestion is, in addition to not straining the company's budget more than nessecary, it does not involve too great changes in the way the network is used and administered. On the other hand, the smaller budget leads to certain compromises, and there is a risk that similar problems occur again if, for example, the company would grow.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible.

The web as an arena for news reporting and information sharing to consumers has grown for many years in the expense of the traditional newspapers. The revenue stream has however not followed the same transformation which has led to a remarkably lower profit when news and articles are distributed through the web. Banner advertising is a method that is commonly used by online magazines to generate profit where advertisers pay to expose their message. One method to measure banner ads effectivity, and indirectly, what the advertiser would pay, is through Click-Through Rate (CTR), how many clicks a banner ad receives in relation to the amount of banner views. One of the variables that play an important role in the banner ad effectivity is the placement of the banner ad.

The goal with this master thesis has been to evaluate and to examine the stationary resistance bridge. The resistance bridge uses a 4-point measuring to determinate the resistance, which is used in the manufacturing of the conductor. It is then used when the resistance is to be decided for coarser aluminium conductors. A conductor has to fulfil certain demands to be able to move forward in the process. One of these demands is the resistance in ohm/km, which has demands that the measure values of the resistance bridge are as true and precise as possible. The stationary resistance bridge had been examined through various kinds of measurements to be able to see how stable the system is and how to obtain a measure value as optimized as possible.

During the financial crisis voices were raised towards the regulatory framework IAS 39 recognition and measurement of financial instruments and pointed out that it was inadequate. The complexity of the framework contributed to the fact that it was difficult to apply. IASB accelerated the modeling of the new to be regulatory framework IFRS 9. In this study we will focus on the reliability of accounting information, which is an important aspect from the stakeholder?s point of view, for example, to be able to make the best decisions the accounting information should be proper.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

This thesis describes teh solution of two problems regarding safety on powered lawnmowers; protectning the users from injury when using the lawnmower in slopes, and when cleaning the cutting blade.The task was carried out through initial studies on a representative lawnmower. A generation of ideas followed with an evaluation to select the best solution. The winning concept was further developed to reach acceptable performance. The word resulted in a functioning prototype utilising an original way of detecting inclinations without incorrect signals. It c an serve as a platform for further development into a product.The work gives insightful experience of solving real-world problems, and especially to deal with situations where several variables and their effects are unknownPlease note that several parts of the work are confidential, and have therefore been removed from the thesis..

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

The objectives of this study was to (1) examine Swedish professional bowlers understanding of imagery (2) their experience in imagery (3) see if there was interest in improved use of imagery within bowling. Twelve professional bowling players (M = 30.42), all male, took part in the study. Six of the players were ranked among the best in the world. The instrument that was used was The Individual Profile of Imagery Experiences in Sport (IPIES, Weibull 2008). The result showed that eleven of twelve use imagery within bowling.

The aim of this study was to examine if it was possible to improve fitness and strength in young ice hockey players with help of a training programme based on functional training and aerobic training. The training programme was performed on Halmstad Hockey U-16 team where 17 boys participated in the study. We performed the training in a period of sex weeks with three training occasions each week. These consisted of two functional training sessions and one fitness session. In the beginning we emphasized the importance of a correct performance and technique.