Purpose Based on the new comprehensive income due to changes in IAS 1, the authors aim to describe how a listed corporate accounting is affected by IAS 1 and the new income statement.Methodology This study uses an inductive approach with a combination of qualitative and quantitative data, using financial rapports from the investment company Latour. This case study is based on Latour?s all published financial statements under the period 2008 to 2012.Result The study resulted in different observations of Latour's operational and financial performance, share price trends as well as ratios. The study's authors can see that Latour's net income and comprehensive income differ due to changes in IAS 1. They can also observe the effect of clean surplus in Latour?s income statement.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

ProblemPerformance management på individnivå innebär att styra individen utifrån individuella mål som förmedlar organisationens övergripande strategi till medarbetarna. För att förstärka styreffekterna av individuella mål kan en belöning kopplas till måluppfyllelsegrad. Effekten av ett bonussystem ställer stora krav på samarbete mellan chef och anställd då de tillsammans ska ställa upp realistiska mål som syftar till att utveckla den enskilde individen samtidigt som de bidrar till organisationens övergripande mål och resultat. Därmed är det viktigt att undersöka hur medarbetare och chefer påverkas av individuella mål kopplade till bonus och vilka effekter detta får inom företaget. Vilken effekt har målsättnings-, uppföljnings- och utvärderingsarbetet på styrning och motivation bland medarbetare och chefer?SyfteSyftet är att undersöka och öka förståelsen kring hur styrning och motivations-aspekter påverkas då performance management bryts ner till individnivå samt hur en belöningskoppling kan förstärka den eventuella styreffekten.MetodUndersökningen har genomförts i form av en fallstudie där intervjuer använts som främsta empiriinsamlingsmetod.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The aim is to describe the factors that influence nurses' assessment and measurement of pain in patients. Literature study based on 13 reviewed articles, searched in the Cinahl. Qualitative and quantitative articles were analyzed. Six themes were identified that can be seen as the factors that influence nurses' assessment and measurement. The themes were   pain education, nurses´ experience in the profession, nurses´ level of knowledge about pain relief, documentation about pain, nurse´s perspective on the patient, and pain measurement.

This report is a qualitative interview study which central content enlightens how movement and sports effects children?s performance in school. With the help of five different teachers in three different schools questions like; how does movement effect the performance of children in school? Have been answered.Lots of research and litterateur shows that children is doing better physical and mental, the concentration level is improved and the performance in school is better when exposed to more movement, also there are less conflicts and the students gets better motor skills.Comparison with the ?Bunkefloproject? has been done, which was a project in the south of Sweden where they let the children have physical education every day and then they examined how this effected their performance in school. With this basis this report will examine the teachers view on the subject.The result shows that the teachers think that there should be more movement in the daily schedule for the children because they seam to be more happy and concentrates better after movement.

This thesis deals with query formulation in full text retrieval. The variables studied were query expansion and query structur[INS: e :INS , and the aim of the thesis is to study their co-effects on retrieval performance in a probabilistic system. The expansion was made with synonyms, and the structure by expressing facets and phrases. The study was performed using QPA, Query Performance Analyzer, which includes InQuery retrieval system and a sub-collection of TREC documents with its topics. The measurement used was precision at 11 DCV points.

The Energy Performance Certification in Sweden was developed as a tool to achieve the Government's target to reduce Sweden's energy consumption by 20 percent by 2020. The Energy Performance Certificate has previously received some criticism for not fulfilling its purpose. Questions that formed the basis for this report is how the energy performance certification provides support to buyers of single-family houses and if the energy performance improved in terms of reliability. The report begins with a background description that describes how the energy declaration works and some of the findings of previous evaluations and surveys. A survey to investigate the broker's position to energy performance have been conducted as well as interviews with buyers and sellers of houses. An investigation whether the energy performance can vary between different calculation programs, depending on various assumptions made by the energy declarant, has been made.Brokers and sellers have proved negative attitudes towards energy performance, particularly brokers.

Många av de verktyg som används för mätning och styrning av prestationer i offentliga organisationer är hämtade från privat verksamhet. Dock har offentliga organisationer ofta andra typer av mål och styrning än privata företag, vilket försvårar måluppföljningen. Denna uppsats syftar till att få en förståelse av Trafikverkets användning av prestationsmätning samt tillämpning av mål- och resultatstyrning. Vidare kan studien ge ett bidrag till ökad kännedom kring hur mätning och styrning av prestationer sker inom en statlig organisation. I en fallstudie som innefattar intervjuer och dokumentgranskning studeras hur mätning och styrning av mål fungerar i Trafikverkets största investeringsverksamhet.

This study has a double purpose. First, it explores and maps out the use of quantitative key indicators in social performance reporting within a microfinance portfolio. This was done on behalf of Storebrand Asset Management, who would like to aggregate and report the social results of their microfinance investments to their customers. The study concludes that the extent of social reporting and types of indicators used varies, meaning that it is hard to aggregate data for use in further reporting. Thus, the work towards the goal of social reporting has only just begun.

This report is based on a thesis that was carried out during spring 2012. The report covers the development of a preliminary study to Performance Sk8. The purpose of the study is to facilitate and contribute inspiration to Performance Sk8 to run an automation project to bring home their production to Sweden from China. The reason is to gain a greater ability to control quality, produce smaller batches and reduce the cycle time to reduce costs.The goal is that the preliminary study shall meet the requirements and wishes Performance Sk8 and other partners defined. The pre study will contain different cost proposals for the automation of selected process and serve as a basis for procurement of the equipment.The pre study has resulted in some proposed solutions to the various steps required to automate Performance Sk8 ?s production.