Evaluating and choosing suppliers based on price alone, has traditionally been the dominant strategy for supplier selection within the purchasing function. With the origin of the Total Cost of Ownership (TCO)-concept in the early 1990s, a new philosophy dawned that promoted the importance of knowing the effects of supplier performance on the buying firm?s internal costs. Since then, scholars have been arguing the case of TCO as a viable model for making purchasing decisions and conducting supplier evaluation. Still, after two decades little is known about its penetration and impact on the practices of buying corporations, leaving the questions of which costs are included in the purchasing organisations? decisions unanswered, and even more importantly why certain costs are considered and others not.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

Idag packas den resterande fyllningen i ledningsgravar ofta med en maskinmonterad vibroplatta. I anläggnings AMA är det angivet olika packningsredskap och hur tjockt lager man måste lägga över en ledning innan man börjar packa för att ledningen inte ska gå sönder eller deformeras. Det står även hur tjocka lager man kan packa med respektive packningsredskap. Den maskinmonterade vibroplattan finns dock inte med som packningsredskap i anläggnings AMA. Målet med denna rapport är dels att undersöka hur olika lagertjocklekar påverkar deformationen hos rör och dels att undersök fyllningens fasthetI den teoretiska delen i rapporten ges en allmän kunskap om bl.a.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.

This paper presents a study of the computer game ?Minesweeper?. The aim of the game is to search through a rectangular area of mined squares without hitting any mines. By using a strategy based on making every operation as safe as possible, series of the game have been simulated. The size of the playground is four times four squares.

Numerical simulations play a vital role in both static and dynamic stability assessment of electric power systems and the foreseeing of voltage collapse. Simulations performed by Svenska Kraftnät(SvK) are mainly done in the specialized voltage collapse predicting software tool, SPICA and the more all?purpose software tool, ARISTO.The grid operators at SvK use SPICA to predict the maximum transfer limit at specified sections (in this report the section in concerns is the southern part of Sweden i.e. interface1 4). SPICA is mainly used as an online application by using actual states from the grid, these states update every quarter of an hour.This thesis is a continuation of the master thesis SPICA ? ARISTO JÄMFÖRELSE by Jakob Katzman and Johan Fält.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

The market for biofuels from the forests have had a positive development and the job initiators for this master´s thesis wanted to examine the profitability of a method for harvesting forest fuel, which was unfamiliar to them. The method was the ?long tree tops-method?, here called the LT-method. The LT-method is characterised by the fact that timber is harvested as the only roundwood assortment while the rest of the stem, which in other cases would become pulpwood, is harvested as forest fuel together with the logging residues. The method is based on the assumption that advantages in handling of the forest fuel assortment such as increased load weights for forest hauling and truck transportation, should compensate for the lower price for pulpwood when sold as forest fuel. The aim of the study was to compare the profitability of the LT-method with the GROT-method (harvest of timber, pulpwood and logging residues) and conventional logging without any harvest of forest fuel, and aslo to try to identify factors affecting the profitability of the different methods.

The project was conducted during a period from November 2014 to January 2015 at the company Westermo Teleindustri AB (WTE). The subject of the project was to make an inventory more efficient. The inventory was located at WTE, but was owned by the subsidiary Westermo Sverige (WSE).The inventory had a high amount of tied up capital. This was due to products that hadn?t been sold.

Interior window shutters can be found in historical buildings, but they are an uncommon occurrence in modern buildings. In modern contemporary construction, large glass panels are often the ideal because of increased light inflow and for architectural purposes. However, this can generate several negative effects, such as increased energy loss, lack of privacy and high sunlight penetration. Problems that window shutters could have accommodated historically. This thesis identifies a lack of knowledge about interior window shutters in the Swedish building stock.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

Purpose: The purpose of this essay is to apply "Discount Dividend model" and "Discounted Cash Flow model" in reality during periods of economic boom alternatively recession.Method: A quantitative research method as well as secondary data and data collection method is used. This data consists of the company?s annual reports. Totally, 20 companies of different sizes under diverse economic conditions are involved in this data.Conclusion: After reviewing the companies? calculations, it is noted that the both models that are used reflect better stock-exchange rate during an economic recession..

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

Deicing fluids based on Propylene glycol are used at Stockholm Arlanda airport to remove or prevent ice on aircrafts. The high oxygen demand of propylene glycol can cause oxygen depletion in rivers downstream from the airport if not collected. Mass balance calculations made by Swedavia indicate that the actual amount of gathered propylene glycol is underestimated. Suspicions that propylene glycol is degraded in the stormwatersystem designed to collect deicingfluids, called the B-glycolsystem, have to be investigated in order to establish with certainty that no propylene glycol in other ways leaves the B-glycol system.The purpose of this study was to determine if degradation of propylene glycol is present in the B-glycol system and also to estimate the extent of the degradation. Propylene glycols high biological oxygen demand can cause oxygen depletion in waters downstream from Stockholm Arlanda airport if not collected.