Helsingborg has the intention to build a train tunnel south of Knutpunkten. This report investigates the hydro geological aspects of the project. Questions at issue that will be answered: 1. Which parameters affect the groundwater level? 2. How will these parameters change within 100 years considering climate changes and what will be the consequences on the groundwater level. According to SMHI climate analysis the climate can change causing increasing precipitation, temperature, and a rising sea level.

Volvo Hauler & Loader Division in Arvika produces wheel loaders which they deliverthroughout the world. The factory which is situated in Arvika is the largest wheel loader plant in the whole world, with its 1 100 employees. The different models stretch from L60E all theway up to the brand new L350F, with a loader capacity from six tons up to a staggering 35.The assembly of the different models are divided into three different assembly lines, Small(L60-L90), Medium (L110-L120) and Large (L150-L220). The assembly of Heavy (L350)has just been started with an upcoming pre series.This examination paper gives recommendations of improvements and necessary modifications to rationalize the pre-assembly of boom units. Three different scenarios are presented in the paper.

The Swedish energy company Vattenfall is currently the owner of the district heatingsystems in Nyköping and Motala. To be able to also offer cooling solutions tocustomers are becoming more and more important. This report describes the resultsof an investigation of the cooling market in the two cities and the potential needs forcooling today and in the coming 20 years. The total potential for the coming 20 yearsis estimated to be roughly 17 MW for Nyköping and 9 MW for Motala.Two possible district cooling systems for each of the two city centers was modeledand a comparison was made between different cooling techniques namely absorptionand compressor chillers.Absorption chillers driven with district heating during the summer is one way ofincreasing the load in a combined heat and power plant and thereby the possibleelectricity generation. The cost of heat production must be low for absorption chillerto be able to compete as an alternative.

In this project a simulator has been developed (in C++) with the purpose of illustrating how changes in environmental regulations, tax levels and other policy measures affect the composition of an energy system. The aim of the project was to investigate how energy companies? investment strategies are affected when changes in economic and environmental conditions occur. A standard scenario has been created based on current Swedish conditions, but the user can create new scenarios and set parameters freely. The user is tasked with building power plants to supply the city/region with district heating and electricity during a pre-set number of years. When the simulation is finished the result is graded in the following categories: economy, environment and quality. To evaluate the simulator three scenarios were created (?early 20th century?, ?reduced environmental control? and ?future?) in addition to the standard scenario and these were compared with each other by examining how a select group of power plants perform under the given conditions.

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

This report is commissioned by the Water and Sewage Agency in The City of Mariehamn, Åland. The basic aim is to investigate positive or negative effects of a relocation of the sewage pipe from a wastewater treatment plant, Lotsbroverket. The environmental licence of Lotsbroverket is to be revised and The Environmental Appeal Board at Åland?s Government and Administrative Board has made demands that several possible locations in an outer water area should be examined. The present location of the sewage pipe is in Svibyviken, which has been classified as an ?inner water area?.The objective of this work is to study to which extent the nutrient loading from Lotsbroverket influence the environmental conditions in Svibyviken, and to investigate the suitability of different locations of the wastewater pipe from Lotsbroverket.The way a coastal area looks, i.e., its morphometry, determines to a large extent its ecological characteristics.

One of the most common ways to produce heat and electricity in Europe today is by the incineration of waste or combustion of coal. These materials can be very sulfurous and during combustion sulfur dioxide is produced. This is an environmental and health related toxic substance which is why power plants have strict regulations on removing it from the flue gas. Sulfur dioxide is removed from the flue gas by adding a limestone reagent. The sulfur dioxide reacts with the limestone and the synthetic product obtained is ?Flue Gas Desulfurization gypsum?.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

GPS is perhaps the future in agriculture. The next years will show it but the precision becomes only better and better and the number of users becomes only more and more. This work shows experiences from today's users and how the profitability can be improved on a farm with normal plant cultivation. The aim is to show how big the actual advantage can be to have a GPS and how good precision there is with the equipment. John Deere and Trimble are the big producers of GPS equipment to the agriculture.

2. SUMMARY A small garden exposed to a harsh coastal climate can be difficult to design. Limitations in space and in plant varieties increase the needs of an in-depth knowledge to achieve wanted goals. In this degree project the challenge has been to create a functional and position adapted garden for a very small beach house lot in Mölle, a little harbour village at the south coast of Kullaberg. ?Villa Malm?, is situated directly on the bedrock in a close settlement where the gardens, in most cases are very small and exposed to strong salty winds.

The objective of this thesis is to make a training material for KSU, which shows how radiation affects the different electronic components in a radiological environment.All electronic systems in the presence of high ionizing radiation can experience difficulties and be destroyed.This influence may compromise the control system and thus the safety of a nuclear reactor plant.To achieve this objective requires a description of electronic components and sensors, to better understand its function.This thesis will also show the possible solutions available that the author found interesting.Organizations such as NASA, CERN and ESA have worked to develop electronic components immune to radiation. Those organizations have also developed a test protocol that guarantees to a certain extent the security of electronic components in a radiological environment.Since we know how the material reacts with the radiation, it could develop a material that can be resistant to radiation or like CMOS technology has proposed, to reduce the component to avoid the storage of charge in the oxide.Another solution can be the GRAPHENE. Its features will revolutionize the electronics and provide answer to the radiation problems, Graphene will replace Silicium and the electronic components will only have a few nanometers dimensions so the oxide area also reduces, and in this way avoid the known problem of storage of charge..

Detta examensarbete innehåller en beskrivning av växter som under olika förhållanden trivs och kan växa i områden med delvis eller hel skugga. Beskrivningarna av växterna är översiktliga och ämnar inte informera läsaren grundligt om växten utan enbart om enklare fakta för att kunna planera sin trädgård. Jag har valt att inrikta mig på markförhållande beroende på klimatet (torr, fuktig och blöt mark) och markförhållande beroende på substratet (sand, lera, humus och torv) samt temperaturbundna växter. Därefter följer en slutsats där jag reflekterar över mitt arbete. ***********This thesis contains a description of plants that thrive and can grow under different conditions in areas with partial or full shade.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

I chose to study how the Swedish Air force carries out their work with setting goals for their work to improve flight safety and compare this with how the Swedish nuclear power plant Forsmark performs their work with improving nuclear safety. The study showed that both organisations have a lot to improve on in their ways of how to work. Especially when it comes to engaging the employees in the process, both in letting the employees be a part of coming up with areas to work on and in letting the employees evaluate which progress that has been made. It also showed that both organisations need to improve their methods for evaluating the work that has been done. This is especially important for the Air Force which evaluates on many levels and locations and did not have a set standard for how to conduct the evaluation.

I detta arbete genomförs en investeringsanalys på ett mindre aktiebolag med en ensam ägare. Syftet med arbetet har varit att upprätta investeringskalkyler som skall kunna ligga till grund för ett investeringsbeslut för företaget inom det närmaste året. Företaget som analysen har utförts åt är Munktorps Träförädling AB. Detta företag inriktar sig på vidareförädling av trävaror genom hyvling och målning. I dagsläget produceras restprodukterna kutterspån från hyvling och restbitar från exaktavkapning som därefter säljs direkt vidare till en extern vidareförädlare.