At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

In today?s society climate change has grown to one of the largest global issues. To reduce emissions of greenhouse gases, large changes of the energy system are required. An increasingly popular solution is investments in local production of renewable energy resources like wind, solar or geothermal power. The following report examines the possibility for implementing a solar power plant on the new hospital Nya Karolinska Solna. Two different technologies for extraction of solar energy has been studied, solar thermal collectors  to meet the need of heating and solar cells to satisfy the need for electricity linked to operating the hospital building.

Detta examensarbete utfördes på Karlstads universitet för företaget Precer Autotech Innovation AB. Arbetet ägde rum våren 2014 under en 15 veckors period. Uppdraget var att ta fram en lättvikts fastbränsleförråd (främst för pellets) tillsammans med en fungerande frammatningsmekanism samt analysera olika möjliga placering av tanklock. Tanken ska sitta i en 2 dörrars halvkombi av kompakt SUV modell. På grund av sekretess har jag inte gått in i mycket i detalj på vilka fasta bränsle som kommer användas, rapporten kommer fokusera på själva uppdraget.Efter förstudien tog man fram olika koncepter utifrån kravspecifikationen från uppdragsgivare, därefter utvärderas koncepterna med olika beslutmatrisser till det bara fanns några koncepter kvar.

The municipality of Enköping is presently working out a new layout plan for the town of Enköping and new residences are planned in the harbour area. Because of these plans, the municipal energy company ENA Energi may have to move its location from the harbour to another part of the city.The aim of this degree project is to investigate the possibility of building a new CHP plant in another area of Enköping. The future demand on district heating and infrastructure at the new location have been projected. A new CHP plant has been dimensioned and economic analyses concerning the project have been made.Results show that the future demand of district heating in Enköping will differ a little from the present needs. In 2030, the district heating production is expected to be c.

The aim of this project was to describe and to evaluate five small sewage treatment plants in the municipality of Laholm, Sweden, in order to investigate the treatment efficiency and to evaluate if effluents comply with discharge permits. The treatment systems were designed to treat effluents from 90 to 500 population equivalents. A report on the design and the present state of each sewage treatment plant has been made. This was made based upon previous documentation on water quality and by new sampling campaign as there were only a few previous measurements. Data has been evaluated and remedial actions proposed for those treatment plants that don?t fulfill discharge permits.

A wastewater treatment plant has the task to refine the wastewater from substances that should not be released into the environment. The decomposition process can, in a simple way, be described as follows: micro-organisms breathe oxygen and eat unwanted substances. The environment in which the micro-organism lives is known as sludge and the correct amount of oxygen available in the sludge is important for the decomposition to be effective. The oxygenation of the sludge alone stands for about 30% of the plant?s energy consumption.

What makes a Swede betake himself into the Chinese wilderness? How does the Rio Convention influence a plant collector? And who will crack the nut positioned 12 meters up in the crown of a tree? There are many secrets behind the act of collecting plants. In many regards, the documentation of the collection of plants for a Swedish purpose has been unsatisfactory. The focus of the publications is on what plant species that have been found rather than information on how these plants have been collected. Only few results of experimental cultivation are available. There is no doubt that there exists knowledge that has not been publicised yet.

Svensk Växtkraft is the owner of the biogas plant in Västerås. The company is planning to increase their treatment capacity at their biogas plant. In connection to this work it is also possible to make some energy saving changes to the biogas plant. The objective of this study was therefore to make an electricity and heat survey of the biogas plant, a detailed study of the heat consumption in the sanitation step and also a comparison of energy consumption with the present sanitation method and an alternative strategy where the waste is treated in 55 °C during 10 hours (the current method is heating to 70 °C during 1 hour). The energy survey was conducted in close collaboration with staff at the biogas plant. The current during normal operation was measured, power was calculated and multiplied by the time of usage to obtain the energy consumed.

This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.

Gunnebo House and Gardens was designed during the late 18th century by architect Carl Wilhelm Carlberg as a summer residence for the wealthy merchant John Hall Sr. and his family. The garden consists of formal garden, kitchen garden and English park. For the first two parts several original drawings have been preserved and here a lot of restoration work has been carried out. This paper aims to examine how the English park might have been implemented during John Hall Sr.?s time and to create a plant scheme for the area called ?Engelska kullen? (The English hill).

This report is about the experiments with mixing of the separated water and the vacuum pump seal water at Hellisheiði power plant. This is done to prevent silica scaling and clogging in pipes and reinjection wells as well as eliminating vacuum pump seal water from the plant. The experiments were done in four stages: the first stage comprised of tests with different flows of separated water at 70°C, the second stage was carried out by mixing the separated water at 70°C and the seal water with different amounts of the seal water, the third and the fourth stages were like the first and second but with the separated water at 120°C. The results show that this method is good if the mixture is around 50/50 separated water and seal water, to control the silica scaling in the separated water and to be able to reinject the seal water with the separated water. This does not eliminate the silica scaling in all of the separated water because the amount of separated water is much more than the amount of seal water that comes from the plant. .

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.

I dagens samhälle råder det en stor konkurrens bland alla branscher och företag, men vad är det egentligen som påverkar konkurrensfördelarna för ett företag eller en produkt. Eftersom energi är en viktig komponent i människors liv och vi har blivit mer miljömedvetna så har också intresset för förnyelsebar energi ökat så tyckte jag det var ett intressant ämne att studera. Syftet med uppsatsen var att ta reda på vad det är som påverkar förnyelsebar energis konkurrensfördelar. Med denna information skulle det sedan vara möjligt att se hur det går att etablera sig på marknaden. Eftersom jag var tvungen att begränsa mig valde jag att studera den danska pelletsmarknaden och därmed involvera fem respondenter.

I fokus för den här studien står en maskininvestering och råvarorna för pellets, deras täckningsbidrag samt kostnaderna för att tillverka pellets när olika råvaror tas i anspråk. Uppsatsen ger också läsaren en inblick i marknaden för pellets och konkurrensen om träråvaran. I korthet beskrivs också produktions- processen. Underlaget för den bidragskalkyl avseende råvara och investeringskalkyl på flisaggregatet har hämtats från biobränsleföretaget Laxå Pellets, Bruks-Klöckner AB och Allan Bruks AB-CBI. Med hjälp av bidragskalkylen jämförs kostnaderna för potentiella råvaror som kan pelleteras.

In order to maintain a high safety level at a nuclear power plant it is important not only to measure the reliability of the components and systems of the plant, but also to investigate how the plant responds to human actions. One of the most hazardous situations in managing a power plant is fire occurring in critical areas. This study concerns the prospect of the local fire brigade to suppress a fire that has started in one of the most critical rooms for maintaining high reactor safety. The model created gives an indication on the possibilities of succeeding in suppressing a fire. In order to get a more reliable fire fighting the following advice are given:- Let the fire brigade go rounds in the plant together with the personnel, during which recommended fire suppressing methods are determined to avoid long preparation time in an actual situation.- Prepare rooms with two subsystems to make them partly with no voltage.- Give the fire brigade better feedback from actual events on nuclear power plants.- Education and training in suppressing fires in electrical equipment.The probabilistic safety assessment strives to be as realistic as possible.