Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

The aim of this thesis is to find a statistical model that sort logs according to a predicted modulus of elasticity on the sawn boards. The input parameters for the model are X-ray variables from an X-ray scanner. For some of the log classes sawn at the sawmill it is desirable to have a narrow distribution of modulus of elasticity on the sawn boards. 250 pine logs from five different diameter classes were numbered and followed through the sawmill process. Log data were collected from X-ray and 3-D scanners in the log intake.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

The aim of this study was to describe preferences of geographic direction of ten, oak-living epiphytic lichen species and how they responded to sun exposure, nearby bushes and trees, bark fissure depth and circumference. The frequency of every species was recorded in arcs of ten degrees around the tree at a height of 130 to 180 cm above the ground. An estimation of the amount of every species in every arc was also recorded. To analyse how the distribution of the lichen species responded to the different factors their concentration for every tree was plotted against the four factors. The distribution of Cliostomum corrugatum had a positive response to high sun exposure and a negative response to a thick layer of bushes and trees.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

Bakgrund: Vi anser att en framtida utmaning är att bygga in en flexibilitet i den fysiska distributionen. Detta innebär att ett detaljhandelsföretag skall ha möjlighet att växla mellan att stundtals distribuera en och samma produkt via centrallager och stundtals direkt från producent till varuhus i förädlingskedjan, en flexibel fysisk distribution. Syfte: Syftet är att utröna förutsättningar för och konsekvenser av en flexibel fysisk distribution för de olika aktörerna i en förädlingskedja, i vilken detaljhandelsföretaget besitter en påtaglig maktposition. Genomförande: Empirisk data har samlats in genom en fallstudie i IKEA:s förädlingskedja. Resultat: En integrerad förädlingskedja med ett tydligt supply chain synsätt, i vilken samtliga aktörer samarbetar och har incitament till medverkan, utgör en förutsättning för en flexibel fysisk distribution.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Ansvaret för skolan ? en studie om ansvarsfördelningen ur ett nyinstitutionalistiskt perspektivAuthor: Hanna JanssonSupervisor: Conny JohannessonThe aim of the study is to investigate which ideas that dominated the official political debate concerning the responsibility distribution for the Swedish school from 1974 to 1991.The study asks two questions: What ideas have dominated the official political debate concerning the responsibility distribution for the Swedish school from 1974 to 1991? and Why did the responsibility of the Swedish school change in 1991? In order to answer these questions an idea analysis were used. Three ideal types concerning democracy, effectivity and professionalism were used in analysing official governmental documents. The conclusion is that all three ideal types dominated the debate concerning the responsibility distribution, but in different degrees, and they can also explain why a new responsibility distribution came up in 1991..

This paper examines the film distribution and exhibition sector in Europe. The general analysis of these sectors? situation was made. Moreover, the comparative and more in depth analysis of three countries by the Porter?s five forces model was made; These were United Kingdom, France and Denmark.

The purpose of this paper is to study the ongoing discussion concerning e-books at Swedish public libraries. The e-booksituation has as of late gained a lot attention in the media. The main distributor of e-book in Sweden - Elib - is in the centreof this discussion and our goal has been to study the opinions and arguments that have been expressed within articles and blog postsconcerning the situation.We have analysed our articles and blog posts through a qualitative text analysis in order to find the main problems of the e-bookdiscussion and which arguments are used. We have also studied the effect Elib might have on the libraries' collection developmentaccording to the articles and blog posts.We found that the major issues within the e-book situation include Elib's price model - which is costly for the libraries - thewatermarking and the selection of books available to the libraries. It is also considered, according to the author's of our articles and blog posts, that the collections at the libraries are affected byElib's system since the choice of which books to include is given to the publishers, not the libraries or its users.The articles and blog posts agree that a change needs to occur for the e-books future survival at the public libraries..

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

Tjänstesektorn är en av de sektorer som ökar mest. Fler och fler tjänsteföretag dyker upp på den svenska marknaden, något som medför att nya konstellationer uppstår inom och utanför företagens funktioner. Distribution, att förflytta produkt från producent till konsument, är en av dessa funktioner. Hur ser konsumenten på detta när förutsättningarna för distribution ändras. Vårt syfte med C-uppsatsen är att undersöka är att undersöka i vilken grad faktorerna pris, distribution, image och trygghet styr valet för en kund att välja en mellanhand som leverantör av tjänsten istället för producenten.