Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

The background to this final thesis is that our mandator, A-hus, was interested to examine which roof system that would be most appropriate to their types of houses. To investigate this, we first conducted an evaluation of the most commonly used roof systems in Sweden today: decking, board, roof cloth and prefabricated roof cassettes.To gather information about the different systems we have conducted interviews with several professionals within the construction industry, done an extensive literature study, and gathered information from the Internet.Based on the evaluation of roof systems and the literature, we analyzed advantages and disadvantages of the roof systems from three main perspectives: system characteristics, economics and other characteristics. We found these perspectives to be the most relevant when selecting a roof system.The main perspectives comprise three categories which are graded. These grades are then added together for a score for each main perspective and a total score for the three main perspectives. Then we compared the systems and, based on the scores, suggested one roof system as the most suitable for A-hus.Our result suggests that the prefabricated roof cassettes probably is the best solution for A-hus, but only if it is possible to standardize the cassettes and still maintain the flexibility to match A-hus? house types.

Virtual communities are a phenomenon that is becoming more common as the information technology comes with in reach for the general public. This report will bring the theories and construction of a virtual community together. The purpose of this report is to describe the different theories that have emerged from the research within this field and to examine the work procedures that have been used during the development of a site for a MDA-community. The MDA-website is a homepage on the Internet that was developed to bring the students closer together. The report describes the work of the project group, why the website was not completed and at the end the theories are looked at on the basis of the construction of the website..

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

This essay examine the meaning produced around bodies and body fat in the queer community, but also in the surrounding straight community. The author has interviewed fat activists, and are using queertehory, to examine and analyze the relationship between body fat and the understanding and construction of sexuality and gender. The author concludes that even if norms around body shape and body fat are overlapping between the two contexts to some degree, they also differ. In the straight community, people with larger body shapes and sizes are punished, and encouraged to stay, or become, slim. However, in the queer community, ?fat? or bigger body sizes are not frowned upon in the same degree.

Today's consumers are demanding more and more from companies and are no longer as easy to im-press as they used to be. It is now the consumers that hold an increasing amount of power over com-panies and not the other way around. This change in consumer behaviour has caused an identity crisis for traditional advertising, and companies are now searching for new ways of reaching their target audience. The purpose of this combined qualitative and quantitative case study is to examine possible risks and possibilities that a retailing company face when communicating through Facebook. Data has been collected through in-depth interviews with company representatives combined with a quantitative study of the company's Facebook followers in order to answer the questions of (1) which possibilities and risks a retailing company face through the use of a Facebook fanpage and (2) if there is a differ-ence in the attitude and behaviour of active respectively passive followers that may have been caused by a retailing company's marketing communication on Facebook.

Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

People who live in northern part of the world spend much more time indoors than those who live in warmer countries. In addition that home should be safe, it should also protect one against heat, cold, sunlight and pollution. The indoor environment is affected by installations, material and how the building is formed. Those anomalies that are visible, felt or smelled can be noticed and be rectified. But it?s much more difficult if these abilities are missing.

In the construction industry the number of female managers is very low, only four percent (SCB, 2010). In fact, women with management positions has risen by six percentage overall, the last seven years (SCB, 2010). If women in managerial positions continue to grow at this rate, the proportion of women managers will be equal to that of male managers in 2033. More women are needed in the maledominated construction industry in particular because it is deemed that they have a different way of thinking and acting (Granér, 1994). Nelton (1991) believes that companies can take advantage of female managers to be more competitive on the market, the reason why is because women can see other possibilities when solving problems. Rapacioli (2010) argues that the recruitment of women into management positions not only benefits the individual itself but also the company. We have used a qualitative study with a deductive approach. Six respondents from the same company were interviewed, two of them have management positions and the other four were underemployed.The research question of this paper is: What differences and similarities are seen between male and female leadership in terms of their characteristics in the construction industry?The purpose of this paper is to examine similarities and differences in leadership in the construction industry where the focus is on the female and male characteristics. To fulfill our purpose we chose a qualitative study. We have interviewed six respondents at one company in the construction industry. Two of the six respondents have management positions and the remaining four are employed. In this paper we have concluded that there are some differences and similarities between men and women´s leadership in terms of their characteristics.

This qualitative research is about how Swedish media constructs immigrants in articles. The focus of the study will lie on ten Swedish articles and how they stereotype immigrants, but the demarcation will be for young immigrant boys related to crimes. The purpose of this paper is to highlight how media achieves its goal to construct a group as inferior. This will be implemented with the help of articles from different newspapers that reported on immigrants who have committed crimes. We have chosen to look at different newspapers to see if there is a curtain pattern in the construction of immigrant boy.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

This report describes a new foundation method and compares it with a traditional founding of concrete. This new method is called the Koljern technique and uses cellular glass which is called Foamglas. The Foamglas is compounded to founding elements by lightweight steel beams. Foamglas is an insulation material with high compressive strength, and is rot, insect, vermin and acid proof. The cellular glass is also fire proof and watertight, which makes it a very good construction material.The report contains a study of a number of cases for which the Koljern technique is compared with a foundation of concrete.

Light pollution in urban areas - How to prevent light pollution at construction Jakob Sjöling Light pollution is a relatively new but rapidly growing form of pollution. Society's increasing demand for light coupled with the pace at which lighting technology evolves is accelerating that growth. The purpose of this study was to analyse how the construction industry plan and design outdoor lighting when erecting new buildings, specifically with regards to the issue of light pollution. It also investigated how local authorities work with these issues during urban planning. In both cases special interest was placed in ways to improve the planning and use of outdoor lighting in order to minimize light pollution.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

Our everyday life is becoming more active and the activities we perform influence the way we dress. Due to an increase in activities undertaken in an urban environment, demands are changing and the need for active wear that meets the new demands follow suit. The four characters represented in the research can be seen as a reflection of the functional features needed, including base layer, mid layer/insulation and shell.Despite the increase in activities, most of our clothes are still constructed on static dummies or drafted on a table in 2D and the main developments within the active sportswear field is driven by material innovation. By creating garments on a body in movement, my aim is to develop new functions and expression in active sportswear through construction.Construction methods in active sportswear are examined and understood through observations and reconstructions and constitute the foundation of a study of movement for a design recovery.The movement and features required for leading an active urban life sets the direction of the development of new func- tional garments. A series of trial and error sessions and draping fabric on a live model in movement created the prototypes used in functionality tests to establish their feasibility.