Sök:

Sökresultat:

433 Uppsatser om Particle-emissions - Sida 11 av 29

Tidsupplösning vid miljövärdering av fjärrvärme : Kontorsbyggnad med solvärmeproduktion - en fallstudie

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

Aktiv ventilstyrning

To achieve an optimal combustion, an even air/fuel ratio in the combustion chamber is required. An optimal combustion leads to reduced amount of emissions due to a more complete combustion, which is an important matter because of the sharpened environmental laws. This can be attained, among other things, by applying entirely variable cam times. To optimize the engines efficiency and its emissions at all workloads and speeds, an active valve control can be applied. This means that the intake and exhaust-valves can be opened and closed at any time, independent of the crankshaft position.

Additiv tillverkning : Ett nytt alternativ inom tillverkningsteknik

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Kärnkraftens värde i framtiden : en jämförelse med kraftvärmeteknologi från biobränsle

The debate on the future of Nuclear power in Sweden has increased with the discussion on global warming. The uncertainty of fossil fuel- and carbonprices the latest years has aroused considerable interest in Nuclear from power companies, industry and politicians. Nuclear power plants have negligible CO2 emissions and are not directly affected by increased price of emission rights and fossil fuels. The future power production needs to reduce its emissions of greenhouse gases to become sustainable. The purpose of this study is to examine the value for power producers to have the option to invest in Nuclear power and how a Nuclear power venture would affect future electricity prices. The study uses two methods, a traditional cash flow model and real option analysis, to estimate the value of Nuclear power.

Fr?n rapportering till transformering: H?llbarhetskonsulters perspektiv p? CSRD:s potential till h?llbar verksamhetsomst?llning

Humanity faces a major challenge with the climate and environmental crisis, largely driven by reckless recourse use and greenhouse gas emissions by corporations. The EU?s Corporate Sustainability Reporting Directive (CSRD) aims to standardise corporate sustainability reporting, making practices more transparent and comparable. This directive seeks to enhance sustainability practices and guide market forces towards sustainability, supporting the EU?s goal of net-zero emissions by 2050.

Vem köper KlimatEl och varför? : Kvantitativ undersökning av Kalmar Energis elhandelskunder

Private individuals can voluntarily buy EU Allowances (EUA) in order to remove them from the European Union Greenhouse Gas Emission Trading System (EU ETS). It leads to progressive reduction of total carbon dioxide emissions in Europe. Kalmar Energi offers customers to obtain one EUA (equivalent to one ton of CO2) per year by paying 25 SEK a month as a KlimatEl-supplement. The purpose of this research is to examine the customers? attitudes in the issue of climate compensation and trying to define the reasons behind their choices.The results of the quantitative questionnaire were analyzed by using descriptive and analytical statistical methods and have shown some correlation between customers? ages and decisions to accept or not the offer of KlimatEl.

The Green Evolution of the Car Industry

This Master Thesis covers the concept of Green Cars. The background to the research area is the high and rapidly growing number of cars, which together with other factors ad to the pollution of the environment. Under the Kyoto agreement the signing members agreed to lower the emissions of green house gases, further on the EU has a 3-pillar strategy on carbon dioxide and cars. Included in the EU strategy is a voluntary commitment from the car industry to reduce carbon dioxide emissions from new cars. The easiest way of lowering the emissions is by using alternative fuels and engines.

Alternativ uppvärmning av reningsverket på Utö - En studie av energibesparingsmöjligheterna i syfte att minska uppvärmningskostnaderna

The projects objective is to find an alternative method of heating (the current method being via electric heating) the sewage treatment plant on the island Utö in Stockholm?s archipelago in order to reduce the energy consumption and ultimately the cost for heating the plant. The project is given by ?Skärgårdsstiftelsen? (The Archipelago Foundation) and is a part of the larger EU-project ?Green Islands?.A model for the plants total heating demand is established in order to get a good perception of how much money can be saved using alternative heating methods. The heating demand model gives an annual heating demand of approximately 32 500 kWh and a maximum heating power demand of around 24,7 kW.

Bedömning av området energi : En jämförelse mellan Miljöbyggnad, Svanen, FEBY12 och PHI

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

Miljöanpsassad metod för hjultvätt

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

Gestaltning av en takträdgård

Gastric ulcer is a common disease among pigs in the whole world where an intensiveproduction occurs. It is mainly the upper region, the nonglandular region of the stomach thatis affected. Gastric ulceration is a disease with several risk factors. The factor that seems tohave the largest impact on the development of gastric ulceration is a small particle size of thefeed. The reported prevalence of gastric ulceration differs from 5 to 100 % and it is a largeherd-to-herd variation.

Restaurering av våtmarker; Inventering av vadare och andfåglar vid Norra Lingenäset

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

The impact of platelet storage time on transfusion results

Platelets are small fragments, but they are of crucial importance for the coagulation. The risk of spontaneous bleeding increases when the level of platelets falls below a thrombocyte particle concentration threshold value of 50 x 109/L. In those cases a platelet transfusion might be compulsory. Ongoing research tries to improve the quality of the platelets and to increase the safety of the method used. However, we still need to better understand which factors that affect how patients react upon platelet transfusion.

Produktion av krukodlade örtkryddor i växthus och dess utsläpp av växthusgaser i Sverige : energianvändning och beräkning av koldioxidekvivalenter

Abstract The global average temperature has increased by 0,74°C over the last 100 years. Most probably, the explanation is due to increasing use of fossil fuels and the agricultural expansion of land use. The new life stile of mankind leads to increasing concentrations of greenhouse gases in the atmosphere. Food consumption contributes with approximately a quarter of the total greenhouse gas emission per person and year, why it is an important task to reduce these. The aim of this work is to quantify energy use and greenhouse gas emissions for (Swedish) herbs produced in Swedish greenhouses. The study is based on a LCA (Life Cycle Assessment) and collected data from participating companies producing herbs in pots.

Vår- eller höstputsning i frövall av timotejoch ängssvingel

Gastric ulcer is a common disease among pigs in the whole world where an intensiveproduction occurs. It is mainly the upper region, the nonglandular region of the stomach thatis affected. Gastric ulceration is a disease with several risk factors. The factor that seems tohave the largest impact on the development of gastric ulceration is a small particle size of thefeed. The reported prevalence of gastric ulceration differs from 5 to 100 % and it is a largeherd-to-herd variation.

<- Föregående sida 11 Nästa sida ->