With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

The knowledge of value-enhancing factors in condominiums is very important for real estate agents when valuing condominiums, but it is also of interest to the owner for an upcoming renovation and sale. Previous research has sorted out the most fundamental factors affecting value of condominiums such as location size, age and condition.The purpose of this paper is by consumer?s actual preferences regarding various attributes identify the most value-adding factors in condominiums. Thereby we want to add and nuance previous research.This has been done through a quantitative method in which possible buyers have ranked how various attributes affect their willingness to pay. The results were analyzed and the median of the various attributes have been recognized.The result shows in accordance with previous research that the location is the primary value-adding factor.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the Parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

This diploma work has been carried out in collaboration with the building contractor Sh Bygg Fastighetsutveckling AB in Uppsala with the intention to investigate how the height of a building affects various energy aspects such as transmission losses, infiltration, and the specific energy usage. Three different reference objects have been studied. The reference objects have been simulated for four different heights in the calculation program VIP-Energy.The results show that an increase in floor number can lead to both advantages and disadvantages. As the number of floors increases, transmission losses per square meter floor area decreases. However, as the height of the building increases, the reduction rate decreases.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

Samodling är en odlingsmetod som kan användas för att förbättra dagens odlingssystem. Metoden innebär att två eller flera kulturer odlas tillsammans under en större del av växtsäsongen. Samodling kan användas på flera olika sätt för att förbättra odlingsförhållandena för antingen huvudgrödan eller hela odlingen. Den har en bevisad effekt på olika skadegörare och kan minska angreppen i odlingen. Samodling kan även användas för att minska ogrässpridningen, förbättra mikroklimatet, samt öka antalet maskar och naturliga fiender i odlingen.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying Parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

This degree theme work aims to evaluate the present ICC-profile and printing ink of Dalarnas Tidningar AB. The companyhas changed printing ink quality and wants to evaluate how the present ICC-profile work with the new printingink. Four different ICC-profiles were included in the comparison.One test printing was accomplished with two different separations. Two new ICC-profile was created, as a comparingmaterial. An densitometer was used to measure the technical Parameters of the printing.

Suspensory ligament injuries are a common cause of lameness among sport horses. These injuries are expensive due to slow healing, extensive convalescence and high risk of recurrence. The prognosis has been reported to be everything from good to guarded depending on the size of the lesion and the location within the suspensory ligament. The purpose of this study was to determine how different factors such as age, use, and location of the lesion are associated with the final outcome after a suspensory ligament injury. Material: Hospital records of 27 horses treated for suspensory ligament injuries at SLU equine hospital in Skara, Sweden, between January 2002 and July 2003 were examined retrospectively.

Aim: The aim of this study was to describe the nurse?s work at an emergency department trough a perspective of caring.Method: A literature review has been made of twelve studies published between the years of 2002 ? 2012. The focus of all the studies was on Swedish emergency departments.  Results: The researchers found four themes that they choose to use as a way of describing the nurses work in the emergency room as detailed as possible. These themes were: ?The emergency room?, ?the nurse?s job assignments at an emergency department?, ?the patient?s experiences? and ?lifeworld and communication?.

The study aims to investigate the feasibility of small-scale electricity production with solar electricity systems, also known as PV (photovoltaic) systems, in Australia. Due to the global warming, sustainable energy has in recent years become an increasingly important issue, both internationally and in Australia. With one of the largest dependencies on fossil energy sources in the world, the country's abundant solar radiation is a possible solution to this issue.Both the technical and the economic feasibility of small-scale PV systems were investigated. On the technological side, the electricity generation, distribution and consumption systems were studied. On the economical side, the Parameters that drive the profitability of a PV investment were investigated.

Itraconazole is a third generation azol, a fungicide which acts by inhibiting ergerosterol synthesis in the fungal cell membrane, and thereby disturbing fungal regeneration. It has proven to be less toxic, to have a broader spectrum of activity and to be more potent than its predecessor ketoconazole. Itraconazole is only available in therapheutics approved for human use. Pharmacokinetic studies has been performed in humans, dogs, cats and laboratory animals. Although itraconazole has been used tentatively with good effect against fungal infections in horses, no pharmacokinetic studies have yet been done.

The aim of this study was to investigate and describe conceptions that been used when people talks about grapples and to put together Parameters that the customers sees as important when they chose a grapple from Hultdins. Every year Hultdins manufacturer and sells about 3500 grapples around the world. With so many users its difficult to oblige everyone. To get an apprehension of what kind of grapple the operators wanted a formula with 18 questions was made. For the interviews 20 forestmachineoperators were choicest who had experience from Hultdins grapples, a lot of them also had experience from other grappleproducers and constructions. The study showed that it is the durability the users give priority to.