Nano materials can today be found in a wide range of consumer products and the number of new products on the market is expected to inrease. In the shadow of hope for nano materilas potential in various applications, low awareness of its health and environmental risks is hiding. Furthermore, the knowledge about people´s risk perception of nano materials is limited. Parallel to the situation described above, the scholls meet the challenge of incrasing the scientific literacy. To achieve this goal, skills in argumentation in science studies has been emphasized and the concept of socio-scientific issues has been emerged.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

Svenska folket uppmärksammas ofta på olika miljöproblem. Såväl tidningar som radio- och TV-program fylls av nyheter och reportage om ozonskiktet, växthuseffekten, luftföroreningar och försurade marker och sjöar. Tanken att miljön behöver skyddas från mänsklig påverkan är emellertid ingen nyhet. Varningar för natur- och miljöförstörelse har yttrats i alla tider. Trots många enskilda insiktsfulla betraktelser under tidigare perioder kan man säga att det egentligen inte var förrän under tiden efter andra världskriget och på allvar inte förrän i slutet av 1960-talet, som förändringar i naturmiljön började uppfattas som miljöproblem och därmed som sociala och politiska angelägenheter.

ABSTRACT Title (English): New technologies, same needs? A qualitative research of media usage in two generations, in the light of modern uses and gratifications research Title (original): Ny teknik, samma behov? En kvalitativ undersökning av två generationers mediebruk i ljuset av den moderna bruks- och belöningsforskningen Language: Swedish  Author: Frida Ivansson Tutor: Sven Ross Course: Media and Communication Studies, Bachelor's Thesis.  Period: Spring term 2013 University: Department of Journalism, Media and Communication (JMK) atStockholm University Purpose/Aim: The purpose of this paper is to, in the light of todays uses and gratification research, highlight the differences in media use in adolescents and adults. I focus on the informants' television viewing and I compare this cross-generational, and in relation to other media use. Material/Method: The method I used in this thesis is qualitative interviews. My choice fell on this method because I believe it to be the most suitable for obtaining the data needed.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.

A Queer Reading of Charles Bukowski?s Women and Love is a dog from hellThis thesis aims to examine how the representation of gender is portrayed in relation to sex and power in Charles Bukowski?s novel Women and poetry collection Love is a dog from hell.The theoretical frame of the analysis is based on Judith Butler?s queer theory regarding the heterosexual matrix and gender performativity. The analysis consists of a textual comparison where a specific selection of poems is analysed parallel to the novel to see how they interact and how they oppose each other, through a queer reading.The analysis is divided in three parts where the first one discusses the construction of masculinity in Charles Bukowski?s protagonist Henry Chinaski and how this is presented differently in the two literary genres. The second part reveals how sex is presented in relation to power and how active and passive women are considered as sexually acceptable.

Natt i marknadstältet is considered as one of Lars Ahlin?s most significant works of fiction. The novel is complex in structure and meaning, containing numerous stories and characters entangled with the main story. One of these stories is the subject of this essay:?Berättelsen om Hedvig och hennes son?.

AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.

Mechanical relays are more and more being replaced with semiconductortechnology. In this thesis it is investigated if and how the larger loads couldbe controlled by transistors. The main part of this work aims to create andverify a solution that can control the starter motor, as well as protect it incase of any failure. The different malfunctions that the solution protectsagainst is high current, too high peak current, low current, maximum cranktime and minimum cool off time. The timers also protect indirectly againstoverheating of the starter engine.The transistors used are BTS555, from Infineon.

ASSA develops locks and integrated security systems for doors. ASSA is Sweden?s leadingsupplier of locks and security systems. ASSA AB worked during the master thesis withimplementing a common development process for all companies within the group. Ideageneration was one relative unexplored area for the group and the interest of finding effectivemethods was required, the company understood what an effective handling of ideas couldcontribute in the pursuit of more and pleased customers.The purpose of the master thesis has been to study and to map which methods are used inorder to carry out idea generation.

This Master of Science thesis was a part of Pharmadule Emtungas project to construct a mobile automated cell for welding of carbon steel pipe (Heating, Ventilation and Sanitation). Pharmadule Emtunga is using a modular building concept for building pharmaceutical factories. The modules contain these pipes. The goal of the thesis was to present concepts for technical solutions regarding welding methods and fixtures for the cell. Conceptual models for the cell were made with aid of CAD software.

The main purpose of this thesis is to investigate the possibility to communicate messagesrelated to sustainable development through cultural works. Culture is here synonymous toliterature or, more specifically, the fiction genre. According to ecocritical research, this genrehas the capacity to contribute to a more sustainable development and is therefore interestingto analyse from an environmental point of view.The novel selected for the study is Vips så blev det liv - eller en hyllning till blågrönalgen(2010), written by the Swedish author Bob Hansson. The analysis is mainly focused on howthe book?s climate related messages are formulated and integrated in the story.

Sweden has formulated ambitious energy goals which signify that by year 2050 the energy usage should be halved. One of the objectives is the reduction of energy usage by 20% by year 2020 and that it should be compared to the usage of energy from 1995. In parallel with increased energy requirements for buildings the demand on housing conservation, by highlighting also buildings from the last 50 years as part of the building heritage, continues to enhance, which in theory means that there is a conflict between these.The law will never be able to point out unique buildings and PBL (planning and building act) is not especially concrete. The National Housing Board has tried to make this more concrete by the new BBR regulations though there are still an enormous variety of interpretations.This report deals with the conflict between conservation requirements and additional insulation of the building envelope and is limited to multi-residential buildings built between the years 1945 and 1975. It is the stock with the greatest energy consumption and that is where the big challenge lies.