Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

In a society where children are getting a bigger influence over the family?s consumption and where more products for children are purchased, the market for children products has expanded. This growth is due to a higher amount of older parents which have a god economy and are choosing to spend more money on products for their children. Also the fact that parents use fashion products for children as a way to reflect their own status and that children are becoming more fashionable and aware of trends have contributed to the markets expansion. All together this leads to a grown importance of knowledge for marketers concerning the market.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

This thesis was performed as assignment from Fazer Food Services. The aim was to survey which food additives that were present in the products in the quotation list of one of their suppliers to the Education and Nursing segment. The aim also was to perform a theoretical analysis of these food additives and to make recommendations which food additives are acceptable and which should be excluded from the products in the future. The recommendations are not published in this report, for more information Fazer Food Services can be contacted. Food additives which have already been approved are regarded as safe according to the safety evaluation methods available at the time of approval.

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Clostridium difficile is a grampositive, anaerobe bacteria with a spore-forming ability. The bacteria is present in the environment, can be isolated from animals and is common in hospitals, where it is a known cause of severe diarrhoea in compromised patients. Lately scientists have been discussing whether Cl. difficile could be a new food-borne pathogen. The bacteria has been isolated from food-producing animals and from meat products. In this pilot study 82 meat products, bought from swedish shops during a periode of four months, were investigated.

Because of the large economic growth in China there are many companies who have economic interests in the Chinese market. Also in the forest market companies have started to invest in China and the interest for the market is growing. The question is how the Chinese forest market will develop in the years to come? How will China?s entry on the market of forest products affect the global forest market? The purposes of this study are to describe production, consumption and trade of forest products, and China?s possible competitive advantage in the forest industry. The purpose of this study is also to describe how China?s entry on the forest market affects the world market of forest products.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

Six different Digital Proofing Systems from three different techniques have been evaluated as totechnique, printing quality, economy and usability. Digital proof from two paper qualities, coatedand uncoated, has been compared with references printed in offset, to see how good they match eachother. Only two Proofing Systems manage to print on reference paper. The other Proofing Systemsuse special paper for digital proof.Measurements and visuell judgement show that the Digital Proofing Systems visualise referencepictures with quite good quality. Proof optimised for coated paper visualise the colours with goodresult.

The purpose of this thesis is to study whether there is a demand for sawn wood products of large dimensions and planed goods among Wallnäs AB:s customers. The thesis consist of two main parts, one survey among Wallnäs present customers and another one which purpose is to increase Wallnäs customer base. Finally there is a chapter that describes what properties the raw material has to have in order to produce the demanded products. The survey to the present customers was conducted through a questioner. A sample of those who stated an interest for either sawn wood products of large dimensions or planed goods, were later contacted for a telephone interview. To reach out to new customers, relevant companies has been identified through the Swedish Trade Councils data base and through the member list of the Timber Trade Federation.

This paper examines the structure of The Golden Notebook and in which way it reflects thethemes in the novel. This paper also describes the context of the 1960`s in which a certaintype of ideas were developing and wants to place The Golden Notebook in this context. Finallythe paper investigates what can be understood by reading the novel as a part of that context..

The purpose with this research is to examine how the green marketing in retail trade can be developed in order to promote the eco-labeled products closer to the consumer.The method for the survey includes interviews with managers of a few retailers and their customers in the industrial sector. The purpose with the interviews was to produce the retailer and the customer?s perspective of products with eco-label on.The research is limited to the region of Västra Götaland.The results from this research indicate that there is a lack of communication between the retailer and the consumer. The consumers don?t think that the product is available.

Shoplifting is a serious problem due to the fact that about 2 % of a retail store's turnaround dis-appears annually. This paper discusses the problem with shoplifting where a closed retail display of glass can prevent this kind of misbehavior. Hitherto the scientific research regarding how consumers react to a closed retail display is non-existing. With this in mind we want to investigate and enlighten the phenomenon regarding consumer behavior and product appreciation. The study is carried out at a retailer in the beauty industry in Sweden both in stores where the selection of perfumes have been displayed behind glass and in stores in which they have been displayed with open access.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.