The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

Den allvarsamma leken (1912) by Hjalmar Söderberg has been regarded as one of the greatest love novels of Swedish literature. The story about Arvid Stjärnblom and Lydia Stille and their extramarital love is marked by timeless universality.In this essay, I will examine this notion of love as a prediscursive value, by means pro¬vided by foremost poststructuralist theory. With Derrida?s conception of deconstruction, the analysis will reveal the constructedness of the true love in Söderbergs novel. Examinating typi¬cal logocentric binarisms the essay will show that the notion of true love is constituting a term in an oppositional relation with, in this specific case, the marriage sanctioned by society.

This thesis has been written at Linköping University for the company Instrument Control Sweden AB (ICS).ICS is a small company located in Linköping that develops software and hardware for Unmanned Aerial Vehicles, UAV. At present, ICS has a fully functional autopilot called EasyPilot but they want to reduce the autopilot?s size to make it more attractive.The purpose of this thesis was to investigate if it was possible to reduce the size of the autopilot and how, in that case, it would be done. It was also necessary to examine whether the old processors should be replaced by new ones and how hard it would be to convert the old software to these new processors.To succeed with the goals many of the old components had to be changed for new, smaller ones. Some less necessary parts were also completely removed.

HMS Networks AB develops, produces and sells communication technology for industrial automation. The product handles communication between a variety of protocols. The product treated in this project is an Anybus X-gateway Modbus-TCP Master/Client and this module is currently configured from a web-based interface. In doing so, the flexibility for handling protocols is limited to what the company chooses to add to the interface. Therefore the company had a request that the flexibility should be extended using a script language.

The purpose of this project was to investigate whether it was possible to develop a type of application, where users would solve chess problems. The main goal of the project was that there would exist an functional application after the study has ended with which users could solve chess problems on a computer. One subgoal of the project was to create corresponding application for mobile phones. The study was limited to require users to have at least Internet Explorer 9 +. For other browsers, there were no corresponding limitations.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.

Development and accuracy tests of advanced exchange trading systems require well adjusted tools for testing. Aptness of these tools are probable to have a major impact on identification of bugs and verification of new functionality. Identifying erroneous parts and bottlenecks of the trading system is of outmost importance for the exchange as a whole since stability and correctness are two of the determinant factors its viability is measured by. This paper covers how this test-tool was created and the motivation behind the design choices made. The tool was created with the goal to be broad enough to cover the majority of cases that could arise, fast enough to be able to test the trading systems speed limitations (i.e.

Physical activity can reduce the risk of developing dementia, and studies show that people who already have some form of the disease can get a better memory function and find it easier to perform daily tasks if the activity is performed regularly. People who are diagnosed with dementia are generally not offered physical activity to a high extent, nor is there a wide range of equipment developed to suit the target group.The Bike Around project was launched during a workshop in Copenhagen and was organized by HCH and Techna Science with the aim to develop new training equipment for people with dementia. The workshop resulted in the development of a customized training bike where the user can get a biking experience from his wheelchair or favorite chair. By integrating the pedal movement with a prerecorded movie projected on a screen, the memory can be stimulated both visually and by the activity itself.Our assignment in the project consisted of three parts: design of the bike, movie playback and software programming. During the project a prototype has been created that meets the requirements of ergonomics and usability..

Denna rapport dokumenterar arbetet med att utreda hur C# och Pitch RTI fungerar tillsammans, och vilka prestandaeffekter som resulterar av denna koppling. Motiveringen kommer från att kunder till företaget Pitch har efterfrågat stöd för C# som programmeringsspråk när de använder Pitch RTI. Metoden gick ut på att successivt lära sig använda de tekniker som finns tillgängliga, för att sedan implementera lösningar på hur kopplingen ska ske. Resultaten visar hur övergången går till och prestandan som uppnåddes med hjälp av indexnotation. Tekniken IKVM hade högre prestandaindex och gick snabbare att komma igång med jämfört med tekniken C++/CLI.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

Enligt oss så är det största problemet med att processuellt generera en pseudo-oändlig spelvärld i realtid är att få genereringen att ske så sömlöst som möjligt samtidigt som världen upplevs som konsekvent. För att finna lösningar på detta problem så analyserar vi andra studier och spel som utnyttjar processuell generering. Vi använder sedan de metoder och tekniker vi funnit för skapandet av en egen applikation för att få en djupare förståelse för hur dessa fungerar i praktiken och hur mycket varje metod påverkar prestandan. I vår slutsats beskriver vi de problem vi fann, deras orsak och ger förslag på lösningar. På grund av studiens tekniska karaktär så riktar den sig främst till programmerare.

The Swedish Armed Force has a need to streamline the preparation of an exercise in tactical training for soldiers because the preparation of an exercise is currently laborious and time consuming when commanders manually share files to each computer that will be included in the exercise. The degree project was to create a file sharing program within the internal network of the Defence Forces? international centre (Swedint). The program is used by the training management to effectively start up an exercise where soldiers train tactical training in a simulated combat environment. The training management use this program to upload files to a server which notifies all the computers on the network to download these files.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Jeansmarknaden idag i Sverige är präglad av hög konkurrens med många olika aktörer somverkar där. De senaste åren har en speciell kundgrupp vuxit fram vilka kallas jeansnördar.Dessa konsumenter och deras syn på jeans är i dagsläget inte kartlagt vilket därförhuvudsyftet med studien. Under studien har vi kommit i kontakt med ett svenskt jeansföretagvid namn Pace Jeans som vi intervjuade och fick därigenom hjälp med att identifiera personersom kunde hjälpa oss att uppnå vårt syfte. Genom att ställa oss frågan hur företaget ser påjeansnörden och hur det här skiljer sig från hur den faktiska konsumenten är. Huvudfrågan fördenna studie är vem jeansnörden är och hur denne ser på jeans.