A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

The aim of this report was to investigate the economy of passive houses. The work was focused on economy in total and on the economy of different components such as windows, insulation, heat exchanger and the air tightness of the climate shell. No attention was paid on the comfort factor or to the impacts on the environment.Two houses, aspiring to be passive were chosen; A big one and a small one. Hence, comparisons considering the size of the building have been possible to do as well.The comparisons were made by calculating ?break even? between two concepts; passive and BBR- concept.

This study focuses on the use of animals in social work from the perspective of social workers. The purpose of this study is to examine social workers? experiences of animal assisted social work and how social workers view the integration of animals in various fields of social work. The research is based on a qualitative method and four semi-structured interviews were conducted with social workers. The theories incorporated in the study are Attachment Theory and Sense of Coherence (SOC).The following results are presented: Social workers are considered to have a more comprehensive understanding of clients compared to their associates who do not hold a degree in Social Work.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

The purpose of this report was to obtain an overview of rabbit meat production in the world, in terms of breeding and feeding. It examines how different feed components contribute to the health of the rabbit as well as the quality of the carcass, and the breeding strategies that are most common in the major producing countries. The production of rabbit meat in Sweden is at present not very large, but it is gaining ground, and that is why this paper mainly deals with the rabbit production abroad. This report also examines the disease Rabbit Viral Haermorrhagic Disease (RVHD) in Sweden, where this disease can cause big problems. The rabbit (Oryctolagus cuniculus) is very special, both in its reproduction and digestion. There is no specific mating season and the digestive tract is designed to digest forage efficiently.

One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

The report presents a thesis carried out on behalf of the company SAAB Training and Simulation which is situated in Huskvarna. The authors of this report are going to graduate as mechanical engineers focusing on product development and design, and this thesis should reflect the knowledge obtained during the education. The assignment, given from the company was to develop a concept of a stand that will constitute as a part of a mobile system for target practice. The reader get to follow throughout the project and can hopefully learn from the smart solutions and approaches that have arisen during the process.Today SAAB doesn?t have a mobile application in their portfolio that utilizes the benefits of their sensor measuring system, also called the LOMAH-bar.

The thesis has investigated the use of templates in timber framing, a field where there has previously been a lack of comprehensive and clear information. The main goal was to map and describe the various types of templates, their appearance, usage, and function, in order to make this traditional craft more accessible to both professional craftsmen and DIY enthusiasts. The project also aims to contribute to the preservation of traditional building crafts, in alignment with UNESCO's Convention for the Safeguarding of Intangible Cultural Heritage. The methodology used in this study was a literature review, where relevant templates were gathered and analyzed. The templates were then categorized using a system developed by the author, which helped simplify the understanding of the templates functions and uses.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

The stretch from the riparian zone of a major river, through the mouth and upstream in tributaries forms a range of differing habitats. The aim of this study was to investigate the effect of these different habitats on the riparian frog community in primary rain forest in Borneo; i.e. examine whether any gradients could be demonstrated in terms of species composition, diversity and density of frogs, as well as which environmental characteristics that seem to be of most importance in forming habitats of high conservational value. A major river, Segama, and three of its tributaries were investigated. The surveys were carried out at night by searching for frogs visually and acoustically along the streams, from the shore of the Segama river and 400 metres upstream in the tributaries.

Examensarbetet är utfört på Albin Components i Kristinehamn som med gamla anor inom motortillverkning och komponenter till motorer har specialiserat sig på transmissionskugghjul till tung fordonsindustri.Projektet har gått ut på att analysera ställtiderna på kuggcellerna 3, 6, 8, 5 och 7. Förutsättningen för att använda produktionsfilosofin Lean Production och dess bruk av små batcher är att ha korta ställtider. Ställtiden är den tid som en maskin står stilla under bland annat byte av verktyg inför körning av en ny order. Då inget produceras under ställ är det en spilltid och som all spilltid måste det reduceras till ett minimum.SMED- metoden (Single Minute Exchange of Die) är en metod för reducering av ställtid där stället delas upp i OED (Yttre ställ) och IED (Inre ställ).Analysen har till stor del kretsat kring tidsåtgången för mätning i mätrummet som är en stor del av ställtiden. Dessutom undersöktes möjligheten att minska tidsåtgången vid själva ställets utförande och kommunikationen mellan operatörerna och mätrummet.För att uppfylla målen har kvalitativa och kvantitativa undersökningar gjorts.