The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

Every place is a stage where people interact. The nature of the stage and its scenography to some extent shapes the interaction. Considered as a place, the school ground gives rise to many varying expectations. Lower school pupils often have clear ideas of how they are expected to behave and how they are expected to use the place. But as the pupils age, the purpose of the school ground grows less obvious.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

In modern industrial robots the components in the transmission contain nonlinearities. These nonlinearities need to be to estimated either for better control or to use the parameters for diagnosis of the system. There is a lot of work done within system identification and mainly within the field of iterative parameter estimation.This thesis considers recursive grey-box identification for a nonlinear model of the transmission in an industrial robot. The nonlinearities that are identified are friction, spring stiffnes, hysteresis and backlash. These nonlinearities are a part of the models that are presented in this thesis.

In recent years, customer profitability has become a focal point of academic discussions on business performance. However, researchers remain divided as to how evaluation of customers ought to be conducted, resulting in uncertainty of how accounting systems should be adapted to prevailing conditions. This paper aims to investigate the application of customer accounting techniques and the role they play in the organisational and commercial context in which they take place. In a case study of Billerud, a Swedish company providing materials and services for packaging solutions, the interplay between customer accounting techniques and customer relationship characteristics has been examined through the application of a theoretical framework developed by Lind and Strömsten. Particular emphasis has been put on deviations from the prescribed pattern of the framework.

This essay aims to broaden the understanding of intolerance towards people with religious and/or cultural Islamic association or background. This thesis has intolerance and Islamophobia as central components and starts with the question: In what manner do twelve pupils talk about Islam and Muslims in their third year of the vocational program, in small towns and in the countryside? The survey took place in the south of Sweden in a rural municipality where a total of twelve students from the industrial, electricity and vehicle program in the Swedish gymnasiums participated in two separate focus group interviews. The essay will use an intersectional analysis to see where the students position themselves and Muslims in relation to each other and to society. The essay also contains a comparison of Islamophobia in the country side and in the city environment.

For the sender of television advertising, it is important to utilize content that gives effect, especially to get the receiver?s attention and then maintain it (Hägg, 1998). What is the content of a commercial that creates effect? Previous research focused on the impact that commercials have on the receivers. A discussion of which content that produced effect in commercials does not occur.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

This thesis approaches the problem of estimating the arm angles of an industrial robot with flexibilities in joints and links. Due to cost-cutting efforts in the industrial robots industry, weaker components and more cost-effective structures have been introduced which in turn has led to problems with flexibilities, nonlinearities and friction. In order to handle these challenging dynamic problems and achieve high accuracy this study introduces state observers to estimate the tool position.The observers use measurements of the motor angles and an accelerometer and the different evaluated observers are based on an Extended Kalman Filter and a deterministic variant. They have been evaluated in experiments on an industrial robot with two degrees of freedom. The experimental verification shows that the state estimates can be highly accurate for medium frequency motions, ranging from 3-30Hz.

This thesis is about covers of books and DVD movies. I have tried to find out if the visual communication of the covers differs between the book and movie with the same story. Do they appeal to different target groups? I have also been trying to find out what designers can do to increase the visibility of covers among others. Are there certain rules to follow for making a cover visible?To reach a conclusion I have been studying components in advertising pictures, since covers work as a kind of advertiser for the product.

The accounting scandals that have attracted attention in recent years have led to internal control becoming a more central part of business activity. Doubts about what firms actually do have increased, all caused by the attention of accounting scandals. To counter this, frameworks and laws evolved and gained a significant role in the organization and its surroundings. The aim of the present study is to find out how four companies in the Kristianstad region are working to ensure its internal control and how they work to minimize risk and reduce uncertainty. We have used a qualitative method and interviewed a person in a senior position in each company.

The aim of this thesis was to investigate if the robotized welding method FSW (Friction Stir Welding) could be applied for joining a rotating structure in an aero engine at Volvo Aero Corporation. FSW is expected to introduce less defects than today?s welding methods and could therefore be suitable for critical aero components. The material is the nickel based alloy Inconel 718, however a material experimentation is outside the scope of this report.The main goal of this study is to verify if the ESAB ROSIO robot based FSW-system has a suitable work space to be able to weld the rotating structure, and if the welding tool has accessibility to the joints. The FSW-process needs a rigid fixture, and a number of fix-ture concepts are presented based on a proposed weld sequence.

AbstractThe aim of this study was to describe the anesthesia nurses experiences of pediatric anesthesia in two surgical wards, a general surgery department and a day surgery surgical department at two hospitals in central Sweden. The study had a descriptive design with a qualitative approach, in which ten anesthetic nurses with more or less experience in children's anesthesia participated. Data were collected using semi-structured interview questions and were analyzed using qualitative content analysis. The results were reported based on a theme, three sub themes and nine categories. The theme When skills, tactfulness and interpersonal skills come to a head, with three sub themes Being prepared and ready, Interacts and open for participation   and Emotional tension.

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.