Intramuscular injections to cats can generate strong reactions in some individuals while reactions of the same extent, according to the author, not always are recognized when using the subcutaneous route. The reactions are probably caused by fear, stress and/or pain. When the injection can generate pain one has to take that into account, which can be a limitation in treatment. It is well known that injections generate pain, but knowledge about the cause and processes of the injection-associated pain is limited. This is mainly due to the difficulty in finding objects to study pain on, high cost of use of laboratory animals and difficulty to obtain objective measurements. Although there is evidence that there may be a local muscle injury by intramuscular injection, it is not always that the extent of damage is related to the pain experienced. Facts about the causes of injection-associated pain have been studied in a literature review.

Patienter med nedsatt kommunikationsförmåga har begränsade möjligheter till att förmedla sin smärtupplevelse. Sjuksköterskan har till uppgift att bedöma patientens smärta vilket kan vara oerhört komplext. Syftet med denna litteraturstudie var att  belysa  bedömning av smärta hos vuxna patienter med nedsatt kommunikationsförmåga. Litteraturstudiens resultat grundades på 15 kvalitativa och kvantitativa vetenskapliga artiklar som kvalitetsgranskades och bearbetades. Analysen av dessa artiklar resulterade i två teman: smärtbedömning av vuxna patienter med nedsatt kommunikationsförmåga och smärtuttryck hos vuxna patienter med nedsatt kommunikationsförmåga.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Aim: The aim of this study was to highlighting the experiences of individuals of non-pharmacological treatment for chronic pain.Method: The study was designed as a literature review with aim to review andcompile the articles results. This study has been based on a systematic literature search of supplementing out of an unsystematic search were 11 articles were found.Results: The participants in the studies had experienced a good effect out of non-pharmacological treatments for their pain and a improved quality of life. Based on participants´ experiences of treatment two categories occurred: body awareness and relaxation. Body awareness arose through treatments like yoga, mindfulness meditation and CBT. Relaxation occurred through treatments, like music, heat, massage and meditation.Conclusion: This study highlights how non-pharmacological treatments is experienced by individuals with chronic pain and two key areas have been identified.

Background: Chronic pain is a condition that approximately 18% of the Swedish population suffers from. This condition affects many aspects of a person´s life and causes psychological, physiological and social suffering. Multimodal treatment is considered the most effective treatment for patients with chronic pain. Patient participation and motivation are very important to treatment. Aim: The aim of this study was to explore patients´ experience of a multimodal chronic pain treatment program regarding their experience of patient participation and interaction with the rehabilitation team.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Bakgrund: Smärta är ett flerdimensionellt fenomen och ett vanligt problem inom äldrevården. Smärtbehandling finns att tillgå, trots detta är smärta underbehandlat hos äldre patienter.Syftet: Syftet med studien är att belysa hur sjuksköterskor bedömer fysisk smärta i omvårdnad av äldre patienter.Metod: Litteraturöversikt med kvalitativ ansats har använts. Datamaterialet bestod av fem kvantitativa och fyra kvalitativa vetenskapliga artiklar.Resultat: Det framkom tre huvudkategorier: smärtbedömningsprocesser, smärtbedömningsmetoder och smärtbedömningsredskap. Ur huvudkategorierna urskildes sex underkategorier: smärtidentifiering, smärtbedömningssvårigheter, kommunikation med patienterna för att bedöma smärta, smärtobservation, smärtbedömningsinstrument och dokumentation.Slutsatser: För att göra en smärtbedömning behövs en god relation till patienten, närstående och övrig personal där kommunikation har central roll. Sjuksköterskan måste tro på patientens egen skattning och smärtupplevelse..

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

Background: Vacuum assisted closure, VAC, is a method which can benefit wound closure. There are not many reliable studies about the effects of VAC in different types of wounds. Previous studies have shown that patients have experienced pain during dressing changes.Aim: The aim of the study was to survey in what kind of wounds the vascular surgery ward have been using VAC, to study the treatment process of VAC and how it has been documented and also to investigate if patients with VAC experienced pain during dressing changes.Method: The patients were chosen from a ledger, which contained 77 patients that had been treated with VAC on the vascular surgery ward. Data were collected with a journal survey protocol.Results: The result is based on 67 patients with a total of 79 wounds. VAC was shown to have a good effect on wound healing and infected surgical wounds were the most commonly wound category undergoing treatment with VAC.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Background: Many Swedish inhabitants origin from different countries with different cultures that may show pain in other ways than Swedes. The Swedish law stress that nursing care should be done individually according to the patient's capabilities and needs. Aim and Method: The aim of this study was to describe nurses´ experiences of encounters with patients from other cultures with pain, and also their next of kin. Qualitative interviews were carried out with seven nurses. The interviews were analysed with the starting point in Giger and Davidhizars Transcultural Assessment Model and the six phenomena: communication, space, social organisation, time, environmental control and biological diversity.

The purpose of this study was to investigate women's experiences of pain, bleeding,to discover the fetus, hospitalization associated with medical abortion at home and toexplore differences in experiences between different groups of women, as age orprevious childbirth. The study was conducted at two gynecological clinics in Uppsalaand in Stockholm. A questionnaire was distributed and analyzed using a quantitativeanalysis method. The response rate was 30 %. Most women were satisfied with thepain relief given to them from the hospital.

The purpose of this study was to investigate the association between physical activity and perceived stress, energy and musculoskeletal disorders among office-workers and warehouse-workers and also to see if there were any differences depending on work-place and gender. The method that was used to collect data was three different validated questionnaires that measured stress and energy (the Stress-Energy questionnaire), musculoskeletal disorders (intensity and localization of pain, a Pain Drawing questionnaire with a VAS-scale) and physical activity (IPAQ ? the short version). Eighty-eight workers participated in the study. Forty-seven of them were office-workers and forty-one were warehouse-workers.