This report is about a thesis that is performed in and for SYSteam Engineering AB in Motala. The thesis work is divided into three parts, study of the market, programming and electronics. The study part consists of examining and comparing different data acquisition systems for testing of different circuit boards, taking into account the modularity, real-time applications, mobility, environmental, interface hardware and software, to be able to define a general module-based data acquisition system in both hardware and software that enables for future developments.The programming part consists of getting started with Visual Studio, which integrates the Measurement Studio for C#. NET. Measurement Studio includes classes and user controls for testing and measuring and offers tools for acquisition, analysis and presentation of real world data.

SammanfattningBakgrund: Långvarig smärta är en individuell upplevelse och kan orsakas av skador eller sjukdomar, och är ihållande mer än tre månader. Detta kan innebära att det blir svårt att klara av sina vardagliga aktiviteter då funktionsförmågan kan försämras, vilket kan medföra ett lidande för individen.Syfte: Syfte med studien var att belysa individers upplevelser av långvarig smärta.Metod: En systematisk litteratur studie genomfördes och 14 kvalitativa studier kvalitetsgranskades utifrån Forsberg och Wengströms (2013) checklista för kvalitativa studier. Artiklar analyserades enligt Axelssons (2012) metod som innebär att gå från helhet till delar och till slut komma fram till en ny helhet, detta resulterade sedermera i sex teman.Resultat: Att leva med långvarig smärta kunde påverka och begränsa individens liv både fysiskt, psykiskt och socialt. Smärtan gjorde att individerna försökte anpassa sin vardag genom att hitta strategier för att hantera sin smärta. En del beskrev bristande förståelse från både anhöriga och vårdpersonal.Slutsats: Genom att lyssna och vara lyhörda kan sjuksköterskor öka sin förståelse för hur individer upplever långvarig smärta.

The measuring of logs is important in the sawmills process to the sawn products. The technology of automatic wood measurement is continuance developing. This study has the purpose to see how the different techniques and the routines works of measure frames for determining of wood value and sorting in sawmills. The study is performed as a literature study and a survey. The survey includes some of the Swedish sawmills that produce more than 10 000 cubic meters sawed products per year.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

Introduktion: Smärta, smärtskattning samt smärtbehandling är centrala begrepp inom hematologin. Intresset att genomföra en studie huruvida kvalitetsmål för smärtbehandling som finns utarbetade på Akademiska sjukhuset (AS) i Uppsala följs, väcktes med anledning av detta. Syfte: Författarna valde i denna uppsats att undersöka om gällande kvalitetsmål för smärtbehandling uppnås på hematologen på AS för patienter med maligna blodsjukdomar. De mål som undersöks är dokumentation, kunskap hos behandlande personal på avdelningen, smärtskattning samt smärtbehandling.Metod: Studien är en journal- och enkätstudie med deskriptiv design. 30 journalers dokumentation på inneliggande patienter från november 2008 har granskats under en period med fokus på smärta.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionABSTRACTTitle: The connection between IBS and FODMAPsAuthor: Helena Hautamäki and Rebecka BertilssonSupervisor: Sofia KlingbergExaminer: Frode SlindeProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: 2013-04-10Background: IBS (Irritable Bowel Syndrome) is a functional gastrointestinal disorder, and is acommon disorder in the western population. The predominant symptoms are diarrhoea,abdominal pain, bloating, constipation, and excessive flatus. Today there are no evidence basedrecommendations concerning dietary factors for patients diagnosed with IBS, but recently certainfactors in the diet that seems to trigger the symptoms have been identified. These factors areshort-chain carbohydrates, Fermentable Oligosaccharides, Disaccharides, Monosaccharides, andPolyols (FODMAPS), which are not completely absorbed in the lumen.Objective: The purpose of this systematic review article is to examine whether there are anyevidence that a diet low in FODMAPs may induce improvement of symptoms in patientsdiagnosed with IBS.Search strategy: The literature search was performed in the databases PubMed, Scopus,Summon and Google Scholar. The keywords were ?Irritable bowel syndrome + FODMAPs?,?Irritable bowel syndrome + diet? and ?FODMAP and diet?.Selection criteria: The inclusion criteria were patients diagnosed with IBS between the ages 18and 69.

Seven individuals from Surahammar in Västmanland Sweden are analyzed for the appearance of pathological and skeletal changes. The graves, all from within the walls of a fourteenth century church, are dated from the Viking age to late eighteenth century. The aim of this scientific essay is to find pathological conditions by doing an osteological analyze, x-ray analysis, an osteoporosis measurement and letting orthopedists assess the individuals. The aim is also to say something about the individuals? general health and how they experience the changes they have in the skeleton.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.