Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

As a result of today`s competitive situation, the demand on the rapid development of research has increased. Both universities and companies are realizing the importance of a functioning and well-developed cooperation. A close collaboration and communication between universities and the business community has in many studies been shown to be very important for business development and knowledge transfer. The purose was to examine how communication and collaboration between universities and industry can be developed and strenghthen on the basis of innovative thinking. In order to initially identify the perceived problems the authors studied how communication and cooperation manifests itslelf today between the two parties, what does not work and how the existing tools for communication and collaboration look like today.

Denna studie har som syfte att beskriva en lärares tillvägagångssätt för att tydliggöra kunskapskraven i Lgr 11 som är relaterade till skriftlig språkfärdighet i spanska, samt att ta reda på elevernas uppfattningar om detta tillvägagångssätt. I den här studien används uttrycket att tydliggöra i en bred mening, vari ingår både lärarens verbalisering av kunskapskraven och alla aktiviteter som läraren sätter igång och som ska hjälpa eleverna att utveckla en förståelse för dessa.Undersökningen bygger på en fallstudie i vilken olika källor har använts: intervjuer med läraren och fyra elever, enkät, klassrumsobservationer, en matris och ett urval rättade uppgifter.Resultatet visar att läraren och hennes elever verbaliserar sina tolkningar av kunskapskraven på ett likadant sätt. För att tydliggöra kunskapskraven använder läraren flera olika tillvägagångssätt, främst utsagor om kvalitet och exempel på korrekta meningar. Som utsagor om kvalitet använder läraren de formuleringar som finns i kursplanen, samtidigt som hon förklarar med andra ord och tydliggör för eleverna vilka konkreta tecken på kvalitet dessa innebär i en text. Återkopplingen till eleverna är också ett tillfälle för att tydliggöra kunskapskraven.Som metod för att tydliggöra kunskapskraven efterlyser eleverna framförallt konkreta råd om hur en text kan bli bättre, samt att få exempel på bra och mindre bra texter.Både läraren och eleverna är tveksamma till vilken roll tydliggörande av kunskapskraven spelar i undervisningen..

Banks carry a great responsibility when it comes to the financial systems in our society. Disturbance in the credit system affects both lender and borrower. All financial institutions must therefore carefully estimate their risk exposure. This assessment enables them to cover themselves from losses with appropriate capital buffers as main guardian. In order to prevent bank crises and also to maintain financial stability in general, new regulations concerning analysis and preventive actions were introduced on the 1st of February 2007.

AbstractThe project "Sound and Play" have been implemented in collaboration with the toy company BRIO in Malmo. The purpose of the project was to examine whether and how BRIO in the future could develop toys around sound for Toddlers.The problem formulations that would be answered after completion of the project was "How could BRIO broaden its product range with the help of audio toys?", "How can you combine toys and sounds in an interesting way for children?", "How do you create a toy with sound that is fun for the child, but not annoying for parents?". Currently BRIO only has two toys with sound in this age group.The expression of the toy was going to be a mix of classic and cool and the overall feeling of the toy was going to be explorative and arouse curiosity in the child. This feeling would be communicated through simplicity and joy.

Iron deficiency is one of the most frequent micronutrient deficiencies around the world. Low iron bioavailability simultaneously with a high iron requirement is a high risk factor for developing iron deficiency. Probiotics are microorganisms that confer a health benefit on the host. Prebiotics are oligosaccharides which provide a health benefit on the host due to a positive modulation of the microflora in the gut. The aim of this paper is to evaluate if there is a connection between pro-and/or prebiotics and iron bioavailability.

The aim of this paper has been to examine personas role in the development phase and whether or not some of the criticism that have aroused against personas is valid or not. In this paper we examine the benefits as well as the downsides of working with personas both from a scientific point of view but also from the experiences of a small company located in the north of Sweden. Since personas much like many other powerful tools have pit falls aswell as do's and don'ts this paper looks to clarify what role personas should take aswell as how to minimize risk and maximize the usefulness of personas..

Evaluations of open Ditch status and function, with an assessment of suitability of a conversion to a two stage ditch as a low maintenance alternative. To illustrate Swedish drainage problems this work focused on two agricultural drainage associations assessed in detail with a new method called MADRAS (Minnesota Agricultural Ditch Reach Assessment for Stability). With the assessment of the MADRAS method estimates were made to conclude the ditches operating problems. This was made through measurements of sediment depths, mass bank failures etc. in order to quantify ditch problems and propose practical actions for improved ditch stability and water quality. The MADRAS surveys were conducted in two main ditches that drains 2900 hectares of land on the northern shores of Mälaren. In the study measurements of the ditch cross-sections were also conducted to compare actual profiles with the original map profiles. The evaluation showed that parts of the studied ditch sections were operatively poor; main reason was mass bank failure, undercut channel banks, sediment aggregations and narrowed ditches. The profile survey shows that a majority of the profiles 80 % has sediment accumulations there remains only 64 % of the original profile from the map.

This report addresses the growing need to adapt the medical healthcare to the new possibilities that can be accomplished by incorporating a web aspect to the personal treatment plans of patients. It describes what implementations that need to be considered in order to successfully convert to a partially web-based treatment.The report also reflects the potential economical gain that can be made by keeping the communication between the patient and the doctor frequent. It also takes into account the personal gain to the patient by increased feedback and easier ways to communicate with their attending physician and thereby increasing the quality of their healthcare and service.The construction of a prototype of the system required is also included in the report as a description of construction and functionality of the prototype along with results and estimated outcome..

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

AbstractTitle:Lean Production in The Public SectorsLevel:Final assignment for Master of Science in Business Administration.Authors:Simon Mårtensson and Ramnpreet Kaur MaanSupervisor:Stig Sörling and Tomas Källquist.Examiner:Lars-Johan ÅgeDate:2015 ? June.Aim:The use of Lean Production in the public sector is increasing and there are still opportunities for improvement that contributes to a higher customer value. According to previous research that has been done, there is a lack of research in the field of Lean production in the public sector. Thus, the aim of this study is to create an understanding of how Lean production as a concept can help to influence employees to work with continuous improvements and customer value in the public sector.Method:The study has a hermeneutic perspective as a starting point where the substance is studied from an operator approach. We have chosen to build our study with the help of deduction starting with a theoretical framework and then go into the empirical framework.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

This thesis attempts to describe the application of variation theory, as developed by Ference Marton, at a Swedish primary school, intermediate level. The aim of the thesis was to investigate some aspects of a learning process. The students were introduced with the theme of ?sustainable ecological development?. This included theoretical and practical knowledge of the art of sustainable living.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.