Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

This is a study, the purpose of which is to investigate how the construction company Sefab Bygg AB is able to increase its profitability and render a more efficient production process through logistic solutions. The study is made during one of Sefab´s present projects. The project includes sanitary renovation of 650 apartments in the co-operative Opalen in Norrköping.To find out whether changes of logistic routines are profitable or not, it?s necessary to evaluate the total cost of the changes. A total cost analysis is a mapping of all the costs for a particular material, on one hand for the present situation and on the other after the change.

Boliden Mineral Ab's mine in Garpenberg, Dalarna is going through a massiveexpansion. The annual ore production is being increased from 1,4 million tons to 2,5million tons in less than two years period of time. Along this expansion thedepartment of mining techniques is administrating a project of optimizing the shortterm planning for the mining production. Garpenberg have since mid 90s storedinformation from all mining processes in a database.The information consists of time data from all the different activities required in themining process, for example charging, blasting, loading etc. The database also containstime data of delays that are affecting the production.

Lean production härstammar från företaget Toyota och Taiichi Ohno?s begrepp ToyotaProduction System. Metoden är idag ett dominerande styrmedel bland organisationer. Därmedhar konceptet implementerats i allt fler västerländska resultatstyrda organisationer, varsparametrar för kontroll skiljer sig mot de lean production utgår från. Dess innebörd sträckersig över stora delar av en organisation, vilket bidrar till begreppets komplexitet.

Study objects: Three different productions companies which the authors have chosen to be anonymous. Purpose: The purpose with this study is to examine why production companies choose to use 3D-animations in television commercials, and what different kind of aspects affects their decisions. Theoretical: The theoretical chapter reviews the history of 3D-animation andtelevision commercials and other fields that will be relevant laterin the analysis and discussion. Method: A case study has been made on three different companies, two of the companies are active in post-production and the other one is active in the consulting area. Data was collected through semistructured interviews with two of the companies.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

Several thousand years of human impact on the landscape in the form of cultivation is the reason to many nature- and culture values in the agricultural landscape today. Intensification and rationalization has led to vast monocultures and has forced many farms to close down. These trends have increased in the last years and constitute great threats to the values of the cultivation landscape. The purpose with the environmental objective A varied agricultural landscape is to protect these values. The environmental action plan of the municipality of Lund (LundaEko) 2006-2012 is built on the 16 national environmental objectives. The purpose with this paper is to put together material that the municipality of Lund can use in their work with modifying the local intermediate goals for the environmental objective A varied cultural landscape. The overall issue for this paper is ?What has happened with the state of the cultivation landscape in the municipality of Lund since LundaEko was approved in 2006?? The paper seeks to portrait the current conditions of the following fields: meadows and pastures, organic farming, exploitation threats to agricultural land, landscape elements with cultural values and species that are threatened.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

This study was a degree in Master of Science in agriculture with specialization in animal science for the Department of animal nutrition and management at SLU. The subject was created by AS-Faktor, a small company for science and development within the company Lantmännen AB. It was a test of the effect of SPC (Special Processed Cereals) on induction of the endogenous protein AF (an antisecretory factor) in plasma and intestinal lumen in broilers. Previous results have shown positive effects on different intestinal diseases in pigs, horses, dogs as well as in humans. Beside the induction we also studied the effects on results in a conventional slaughter chicken production, including the ability of SPC to compete with or be affected by the coccidiostat, Salinomax.When diarrhoea occurs, it's because there is an imbalance between the secretion and the absorption and it can be caused by for example toxins.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.

It's not a secret that most companies strive to get such a high economic return as possible. To successfully engage in a profitable enterprise, there are many elements that come into play. An important element is the motivation of the employees and their work performance. Work motivation is a key factor for the employees to improve their performance and therefore determinant for the successes of the company.This work is a case study in the production at Fresenius Kabi, Uppsala. The work is based on an employee survey that they fill out once a year and the aim is to develop a deeper understanding for these questions and how the employees see on leadership, communication and goal-setting as motivators and how these factors works in the company today.To get this deeper understanding I have used a qualitative approach.

Sheep breeding contributes not only with wool, hides, meat and milk but also with openlandscapes. The sheep?s wool is a good raw material thanks to a lot of different qualities as itis water rejecting and easy to form. The wool production today is concentrated to specificplaces in the world which leads to environmental problems and a distorted market. InJämtland, a province in Sweden, there is right now a staking going on for local production andrefining of wool in a project called Ullforum.