Nuclear power production carries potential risks both for the environment and for the work force. Different safety measures are employed and they stem from local rules as well as from regulatory authorities. This work describes the development of a safety promoting tool at Forsmark Power Plant, one of Sweden?s three Nuclear power plants. We describe the development of a computer based system for Pre-Job Briefing and Post-Job Debriefing.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

This report is focused on marketing opportunities for small-scale mango farmers in the Nyanza Province in Kenya. Kenya is a large horticultural producer in the world. Horticulture is an important income for a large share of the rural population in Kenya but profitability is low due to inefficiencies in marketing systems and poor infrastructure. The conditions for growing mango in the Nyanza Province are very beneficial and there are two harvesting seasons. Mango offers good income opportunities for small-scale farmers in the Nyanza Province.The aim of this study is to identify marketing conditions that will enable prospering business for small-scale mango farmers in the Nyanza Province, Kenya.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

The hydropower from Nissan River is of national interest and produces annually 230 GWh from the twelve power stations in the main flow. For modified waters a consideration between the power production and the biological values has to be made. This reports serves as a pre-study for Nissans Vattenråd. It tries to evaluate some of the biological values in the Nissan basin and map the power production in the area. And the size and value of lost power production from new fishways for the twelve stations in the main flow.The investment of new fishways is calculated using simplified templates with values from the business.

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

This study investigates if and how grammar instructions and exercises in Spanish textbooks have evolved during the last thirty years. More specifically it focuses on how the grammar is presented (explicit instruction) and on the nature of the exercises (input, production and interaction). The method for investigating these things is firstly an analysis of the explicit instruction, and secondly a quantitative study of the exercises. The number of textbooks analyzed in this study is four and only the chapters that focus on teaching the preterite are included in the analysis. The result shows a tendency towards direct explicit instruction and controlled production practice.

The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.

Carbon sequestration through restoration of degraded pastoral soils is an advocated way of mitigating global warming, and simultaneously alleviating poverty. An often proposed rehabilitation strategy is fencing of pastures, a method that was introduced to the farmers of Chepareria by the Vi-Agroforestry organization in 1987. The landscape of Chepareria changed from eroded, over-grazed grasslands, to a mixture of open-grazed commons, pastoral enclosures and cultivations. The aim of this study was to investigate (1) if the soil organic carbon (SOC) is higher inside the enclosures than on the open-grazed commons, (2) if SOC is affected by duration of fencing and (3) what effect cultivation of pastures has on the SOC. Estimations of vegetation cover and deep profile (100cm) soil sampling was performed on six clusters containing; (1) open-grazing (OG) (2) 1-5 years of fencing (FENCED(1)), (3) 7-10 years of fencing (FENCED(2)), (4) 15-23 years of fencing (FENCED(3)), (5) maize from OG (A(OG)), (6) maize from fenced pasture (A(FENCED)).

In this thesis the methane gas potential of three different substrates, two algaes Saccharina latissima and Laminaria digitata and biosludge mixed with paper fiber was studied. This was done by batch experiments in a laboratory environment to examine the gas production and composition of the produced gas.Biogas production is a complex anaerobic digestion process in which various microorganisms decompose the substrate in steps and at the end produce biogas and a residue. Many factors affect the production of gas, for example the substrate content, temperature and pH in the digester.The analysis of methane potential were divided into two experiments. In experiment 1 substrates were digested along with inoculum from Växjö waste water treatment plant in a temperature of about 37 ?C.

Improved wireless datacommunication with the forest machines might be the next big step in the logging process. The use for wireless communicationsystems within the forestry is among other things to report the production from the forest machines, to supply the machine opera-tors with the right information and for safety. CDMA2000/ 450 is a third generation mobilecommunicationsystem which could replace the old NMT- 450 and for comparatively low costs. The reason for the low costs is that you only have to use the old NMT- 450 masts and supply them with new equipment. In the test of CDMA2000/450, that has taken place in northern Uppland, two kind of files have been sent.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.