This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

The purpose of this study was to examine whether a L2 learner could correct or imitate structures of the language that they could not produce in written production defined by processability theori levels.The Informants had Arabic as their mother tongue. The study showed that the ability of correction developed slower than the capacity for imitation and the ability to written production. The ability of the correction developed by the duration of the stay. The result was a confirmation of theory formation in processability theory. Corrective elicitering could be developed into a useful diagnostic tool in the classroom and thus provide an education that followed a natural learning order according to processability theory by Pienemann.Keywords: processability theori, imitation, correction, written production.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

District heating covers most of the residential areas and industries in the twoneighbouring Swedish municipalities Nyköping and Oxelösund. In Nyköping,Vattenfall AB Värme produces heat in a bio-fuelled CHP plant. In Oxelösund,waste heat and use of waste gases from the steel production at SSABOxelösund is the basis in the district heating system.This report examines the environmental consequences of a connection betweenthe two district heating systems. A broad system approach is used and the focusis on environmental effects in the system.A system analysis has been performed on the result of simulations of differentheat and electricity production alternatives. The alternatives simulated wereone where Vattenfall Nyköping covers the base load in the joint district heatingsystem and two where the power plant at SSAB Oxelösund supplies the heatbase load.The conclusion in this report is that the consequences of connecting the twodistrict heating systems can be both positive and negative, depending onsystem boundaries and on the environmental focus.

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

Product development is essential for all companies that want to survive in competitive markets regardless of the characteristics of the product that the company sells. Companies that sell products within product categories which can be seen as bad, also need to develop their products in order to remain competitive. If these bad products add a positive attribute, for example that they get organic, a contradiction within the product arises and they get incongruent. This thesis investigates which effects that follow a launch of an incongruent product. The thesis also examines if these effects are affected by the strength of the brand under which the product is launched.A total of 240 respondents participated in an experimental study where product incongruity was manipulated for two different product categories, where one well known brand and one unknown brand were examined in each category.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

In Sweden we need more lambs during March to June. I decided to calculate on a spring lamb production, because to many of the Swedish lambs go to slaughter in the autumn. I counted on 1000 ewes which have 2000 lambs each year, 200 of these lambs stays on the farm and replace old ewes. The buildings are 3600 square meters. I have counted on two different sorts of buildings, the first one is a shed, the second one is three polytunnel sheephouses.

Lundbergs Plåt AB is a small company situated in Jönköping. Their main task is to process different kinds of steel such as stainless steel. Lately, they have shown an interest in Lean production.On the basis of the situation mentioned above, we developed the purpose to find and decrease the non value-added wastes in the production at Lundbergs Plåt AB. Out of this, we also developed and answered two questions: Which wastes can be found with help from a value stream mapping (VSM)? In what way can these wastes be reduced and how can these reductions contribute to an improved production? VSM is the method used to find the non value-added wastes.

This essay analyzes the production process in connection with the original play Utopia 2012, which premiered at Backa Theatre, Gothenburg, Sweden on 27 October 2012.The aim of the essay is to seek a deeper understanding of this particular production process. No universal process plan was employed when creating Utopia 2012. Therefore, taking into account artistic, technical and administrative aspects of the work, a chronological process map has also been constructed in connection with this essay, in order to clarify each step of the theatrical working process.The theoretical approach is hermeneutic, and the material is based on interviews with key individuals with different professions and functions within the working process in order to gain multifaceted perspectives and results. The interviews took place at Backa Theatre with the exception of those held by telephone with the project?s two producers, both of whom by that time no longer worked at Backa Theatre.The findings of the essay mostly indicate that, with the significant exception of director Mattias Andersson?s artistic vision, no fixed process map nor explicitly articulated common goals were employed in this particular theatre production.

Lip force has been found to affect the ability to achieve satisfying speech production and swallowing. A normative value for lip force in adults has been measured to 15 Newton (N). Corresponding value for children measured with Lip Force Meter 100 (LF100) does not exist. In the current study lip force was measured in children between the ages of five and ten years. The aim of the study was to obtain normative values for children with typical development in separate age groups.

Today?s community requires an increase in food production. Animals are today bred so that they produce more than their ancestors did. Production has been the most important and breeds with the highest production levels have therefore become popular. Many of the old local breeds have become extinct or are about to become extinct because of this trend.

The aim of this study is to find information about what to do when riding arena footings are worn-out. Especially, the surface layer of riding arena footings is very interesting because of its importance of giving grip in every step for the horse, as well as shock ab-sorption. Generally, surface layers are containing several different parts in order to achieve desirable properties. These different parts can consist of organic material or in-organic material (mostly gravel). Gravel and many other materials in the top-layer are environmental friendly, and therefore, easy to get rid of.

Syfte: Att analysera hur dagligvaruhandeln använder sig av Grön Marknadsföring internt och externt för att positionera sig som ett miljövänligt företag på marknaden.Metod: En deskriptiv undersökning med primärdata i form av personliga intervjuer från de tre största aktörerna inom svenska dagligvaruhandeln.Teori: ?Green Marketing Activities at the Three Levels? har används som modell för att ta reda på hur de olika företagen arbetar med Grön Marknadsföring. Modellen är uppdelad i åtta områden och tre nivåer för Grön Marknadsföring.Slutsats: Samtliga företag vill ta ett miljöansvar, men två av tre ser sig även ha ett ansvar att informera och hjälpa kunder till ett bättre handlande. Två av de tre undersökta företagen är mer inriktade på att bygga ett ekologiskt varumärke medan det tredje företaget är mer inriktad på att upplysa om ekologi. Undersökningen visar dock att alla aktörer har undermåligt arbete med marknadsföringen i butik för att fånga upp kunders ekologiska intresse.