During the 17th century the production and distribution of printed works increased in Stockholm and Uppsala. However, all works that the publisher wanted to print, did not reach the reader. This thesis aimed to show when, where and how printed books and dissertations did not reach the reader. To achieve this aim, aspects of several well known models showing systems of book production and distribution were combined and adapted to suit Swedish conditions in the 17th century. This combined model focused on processes of selection and was presented and used as a theoretical approach.

The situation at Plastal AB is following; the plant in Simrishamn has not capacity enough but the plant in Kristinehamn has unused capacity. My task with this master thesis is to build a logistic flow between this two plants, optimize purchase quantities and ensure delivery safety.The production of the Intermediate Section (LS) will be divided between the plants. The LS will be produced in the following way; the injection moulding process will be done in Simrishamn and the assembling and lacquering processes in Kristinehamn, The reason to divide the production is to ensure delivery safety. Plastal AB can not move the whole production of the l.S because the two plants have different processes (moulding res. injection moulding).When the 1.5 has been transported to Kristinehamn following moments are included in this order; lacquering, welding and assembling.

This paper?s objective is to investigate whether Modigliani and Miller (MM) I & II proposition from 1958 with regard to capital structure, is still valid among public Swedish firms.We have chosen the 63 firms on the Stockholm Stock Exchange (OMX) that Affärsvärlden magazine?s general index (AFGX) has categorized as industrial firms. We based this selection on the assumption that these firms are relatively capital intense and have a clear focus on production and, therefore, mainly uses capital structure as a mean to finance their production and not as a means in itself.To be able to fully evaluate these firms we have calculated the current key ratios based each firm?s annual report. To make the figures comparable across the entire population we adjusted them to each firm?s turnover.The results we have reached concur with MM?s proposition I regarding capital structures independence of the firm value.

The piglet mortality rates have become a major issue in today?s pig production. While other production traits such as number of born piglets or produced piglets per sow have been improved, the mortality rate has escalated. High mortality rates before weaning does not only affect the economy but must also be looked at as both an animal welfare problem and an ethical issue. The background to this problem has been addressed many times, and its salvation has also been addressed by breeding.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Peat litter has been used in animal houses for a long time. Because of its good ability to absorb liquid and nutrients from the manure it can create a dry surface for animals and a valuable manure product. Through changes in agricultural practises the use of peat litter has diminished and is to a great extent replaced by straw, sawdust and cutter shavings although Sweden is rich in peat-findings. The aim of this work was to summarize the presented knowledge about the used of peat litter, techniques, advantages and disadvantages and to compare with other commonly used litter materials. Articles on peat litter have been searched for in magazines, databases and books at SLU library. Visits to peat industries, interviews with peat producers and with peat researchers contributed to the material. Peat is not a uniformly material.

Cost allocation ? a study of how Swedish energy companies allocate costs between electricity and district heating in a combined heat and power plant District heating is today the most utilized alternative for heating in Sweden. In a combined heat and power plant (CHP) electricity and heat are cogenerated. The environmental and economic advantages with this kind of production are high. A problem in a CHP-plant is to allocate costs between electricity and heat since both products are generated in the same process.

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.

Inledning: Resursproblemen inom vården ökar genom att behandlingar och mediciner blir dyrare, andelen äldre blir fler och för att möta dessa problem måste vården bli effektivare. Utbildningar inom förbättringsarbete är på framtåg och Lean Production blir alltmer populärt. Bakgrund: Redan på 1800-talet tog Florence Nightingale upp betydelsen av en säker och god vård. Styrdokument som lagar och riktlinjer beskriver att sjuksköterskan kontinuerligt ska arbeta med att förbättra och skapa kvalitet på vården. Verksamheter som använder sig av Lean Production har visat sig kunna förbättra kvalitet och genom värdeflödeskarta kan värdeskapande steg för patienten identifieras och icke värdeskapande plockas bort.

Urbanisation has increased the distance between the urban and the rural. Urban agriculture can be a solution to overcome that distance. The characteristic of urban agriculture is the intensive production in intra urban and peri-urban areas. Until 1950s food production in cities was an important part of the urban economy and the urban food supply. Since the 1950s the urban located production of food has almost ceased in Sweden, partly as a result of cheap food imports.

The limit for mercury in fish, set by health authorities, is exceeded in about half of the lakes in Sweden. Methyl mercury (MeHg) is the most toxic form of mercury and accumulates in fish. Therefore transformation of inorganic mercury (Hg) to methylmercury (MeHg) is an important process that we need to understand in order to possibly counteract the negative effects of mercury in the environment. The seasonal dynamics of mercury biogeochemistry is likely of great importance for the accumulation of MeHg in the aquatic food web. In thesis the chemical speciation and transformations of Hg and MeHg in bottom waters and sediments is followed in Ängessjön, a small lake located on the east coast in the middle of Sweden. The lake is not directly affected by any industrial pollution and concentrations of Hg in the sediment reflect the atmospheric deposition in this area, as well as processes taking place along the hydrological pathways from soil to lake. Samples from sediment, bottom- and streamwater were collected in average every second month during the period Feb.

NorFor is a cooperative project between the consulting organisations owned by the farmers in the Nordic countries ? Sweden, Norway, Denmark and Iceland. The project started in 2001 and the outcome, the system for ration calculation NorFor Plan and the model for evaluating the ration NorFor Evaluation, was completed in 2006. Along with NorFor Plan economical optimization are available and according to literature, the optimization will generate a 2 öre lower feed cost per kg milk, and thereby improve the profit for the farmer. The use of NorFor Plan in Sweden for feed optimization during spring 2008 has been very small. In this study eight herds in the middle of Sweden fed half the herd according to the classical system used in Sweden and the other half according to NorFor Plan system.

This thesis investigates management accounting systems in a Swedish health care environment. Through a qualitative case study of an activity-based cost accounting system that was introduced in 1994 at S:t Görans Sjukhus, a large Stockholm hospital, the following questions are addressed: What benefits can an activity-based cost accounting system offer the Swedish health care providers? What are the potential problems impeding the implementation of such a system? Main findings: an activity-based cost accounting system can improve the understanding of where costs are generated in the production processes. Comparisons between alternative production processes are improved, and the data may serve as a basis for internal pricing measures. Concerning the second question, difficulty in reconciliating the principles of economic control with the culture present in a hospital is identified as the main obstacle to a new management accounting system..