Sök:

Sökresultat:

2865 Uppsatser om Organic broiler production - Sida 14 av 191

Effektsekvens på hal is

Detta examensarbete handlar ?Verklighetstrogen Effektskomposition?. Målet med arbetet är att undersöka och utnyttja alla de olika aspekterna som gör att en film med specialeffekter känns så verklighetstrogen som möjligt. Arbetet handlar om de olika delarna i en filmproduktionsfas så som pre-production,production och post-production. Filmen som skapas är en specialeffektsbaserad hemmavideo som har som syfte att vara så chockande som möjligt i förhållande till vad man förväntar sig när man börjar kolla.

Hållbar konsumtion av nötkött och mjölk

Sustainable beef and milk consumption. The consumption of beef and dairy products in Sweden is high. A lot of greenhouse gases are emitted from the production of these products. The production of beef in Sweden has decreased but the import has increased. The number of dairy cows has decreased while beef-production with suckler-cows has increased in Sweden.

Elproduktion med ORC-teknik ombord på fartygsserien MK II.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

Ansvarsfull produktion ? vägen till kundens hjärta?

Responsible production is a subject of increasing importance for companies toadopt and communicate to their environment and many companies choose to implementenvironmental ? and ethic considerations into their brand strategy. There is, however, adividing line between companies according to what extent they choose to implementresponsible production into their brand strategy and to which extent they choose tocommunicate it to their stakeholders and surroundings. It is the hypothesis about a dividingline that is the foundation for this essay and something we believed could be interesting forfurther analysis.The purpose of our essay is to find out how the brand strategy of a company is affected by theresponsible production and in what extent they communicate it to their environment. Byanswering those questions we hope to find out why some companies communicateresponsible production more actively than others.We have conducted in-depth interviews with the Swedish clothing companies; MariaWesterlind, Zion and Dem Collective and we have through our analysis reached interestingconclusions.

Agroprotein som fodermedel till slaktkyckling

Destillers dried grains with soluble (DDGS) is a by-product when producing ethanol. DDGS from wheat has a high crude protein content and a good amino acid profile, which makes it an interesting feed ingredient for poultry. The disadvantage of feeding DDGS from wheat to poultry is that it also contains a high fiber content that chickens don?t have the ability to break down. Lantmännen Agroetanol has developed a new protein feedstuff from DDGS by extracting wheat protein from DDGS, the product name is Agroprotein SD.

Problem med röda hamburgare efter tillagning : bakgrund och möjliga lösningar

Persistent pink in beef patties and hamburgers is a problem in the meat industry that has been known for a few decades. It is a costly problem as it can give rejections of food by consumers. Studies around the world have tried to solve the problem but it still remains a mystery. There are many different theories of what is causing the red colour. Some of the most likly theories are reducing hemocromes, high microbiological loads, contamination of nitrite or organic/non organic substanses, DFD meat etc.

The effect of new raw materials on pellet prices

As demand for renewable energy is increasing rapidly, the market for biomass pellets is expected to continue to grow in the near future. Most of the new raw materials that are discussed for pellet production have one thing in common; the production costs will increase compared to using traditional raw materials such as sawdust and planer shavings. The aim of this thesis is to investigate to what degree increased use of new raw materials for pellet production will affect the general pellet prices in Sweden and to survey what plans Swedish pellet producers have concerning new raw materials. To investigate the raw material situation of the Swedish pellet producers an industry survey was performed. Literature studies were also made on previous research in the subject field. Calculations of the production costs for pellets were done for the raw materials sawdust, wet sawmill chips and energy wood respectively. New raw materials are already used by the large-scale pellet producers in Sweden.

Reducering av ledtid genom en värdeflödesanalys En fallstudie på Lammhults Möbel AB

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Miljövärdeflödesanalys av Risifruttiproduktionen : En utvärdering av värdeflödesanalys och miljövärdeflödesanalys

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

Sockerproduktionens skilda utveckling i u-länder : En jämförande fallstudie av Moçambique och Tanzania

How affected are the sugar production in Mozambique and Tanzania by EU sugar regime? What does the EU sugar reform constitute in these countries?Using theories regarding free trade and anti-free trade, I am able to answer these questions. The aim of this paper is to study how the various sugar agreements with EU affect the sugar production in Mozambique and Tanzania. Therefore I am using a method called a most similar system design in this comparative case study. The conclusion is that the EU sugar regime is the main reason to how the sugar productions in developing countries are.

Kalkylverktyg För Sågklingor

The purpose of this report is to survey Swedex AB?s production costs and to gather all info into a manageable calculation tool. This was made by time and motion studies, interviews of the personnel. All factors were gathered into an Excel chart.The calculation was made according to an additional-charge-method that was considered to satisfy Swedex AB?s goal.

The allotment plot : osäkrande som designstrategi

During the spring semester of 2009 I have participated in what was to become the project The Allotment Plot; a collaboration between the Swedish University of Agriculture and the Wanås Foundation. As one of six students in landscape architecture I have experienced a group based learning process with the point of departure in the designing of an organic and experimental kitchen garden at Wanås, a sculpture park for contemporary art. The project came out as neither us nor any other of the people engaged could have guessed. What was meant to be a garden turned out to become an entire cultivation movement. As students, we have gained a lot of experience through praxis; experience that will be valuable for our future profession. The project has also opened up the possibility to question and reflect upon what our profession and education could or should be about. This thesis focuses on the role of communication and the production of communicative tools in design processes and landscape architectural practice. It discusses how communication may be used in an exploratory and ?un-securing? way, and how this may dislocate the professional role, especially in situations where the design action, as in the case of this study, demands a high degree of transdisciplinarity and collaboration. .

The wine production in FYROM : does the wine sector have a comparative advantage?

FYROM has a long tradition of producing wine. Wine production in FYROM is one of the greatest contributors of the agricultural share of their GDP. The aim of the thesis is to see if the wine production in FYROM has a comparative advantage compared to other countries that produce wine and if FYROM is able to sustain the advantage in the future. The countries chosen for comparison are Bulgaria, Croatia, France and Italy. The methods used in the thesis are the Balassa Index and Porter?s Diamond of National Advantage.

Design of Production Contracts : an examination of the Findus pea production contract

The Swedish processor Findus contracts approximately 500 pea producers annually to secure the company?s supply of green peas for human consumption. A production contract, which has had roughly the same design for decades, regulates the relation between Findus and the pea producers. Agriculture is typically a risky business. The main sources of risk in agricultural production are production risk and price risk.

En modell för att kostnadseffektivt öka produktionen inom aluminium-bearbetning

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

<- Föregående sida 14 Nästa sida ->