The aim of this project was for me to write two complete songs and to get to know my creative process better. I wrote two songs, made musical arrangements for them, transcribed the music in Sibelius, rehearsed the material with two musicians and at last recorded it in a studio. Throughout this I kept track of my own creative process. The project resulted in two complete songs with arrangement. I learned that I have some difficulty handling adversities in my songwriting, and that it was not so easy to get to know my own creative process as I thought.

This study is about conception in the evaluation of financial assistance within the social services. The aim of this study is to describe and understand how social workers reason about variation, conception and local norms and its significance in the evaluation process. To reach this purpose we have conducted semi-structured interviews with eight social workers in which different themes were discussed and reasoned about. In order to understand and analyze our results we have studied/used the knowledge about tacit knowledge and street-level bureaucracy. Our results showed, as previous research states, that social workers do have conceptions about clients.

Purpose: We wish to gain a deep knowledge about product development processes in relation to the aspect of time in companies in highly technological and rapidly changing markets. The purpose is to establish how organizations better can employ time as a resource to make the product development process more efficient. Conclusions: Information we gathered from theory and primary data show that information flow, synchronization and time profit when seeing time in three dimensions are factors which should be reflected in the architecture of a product development process. To illustrate our findings, we decided to create a model..

In the last decades the continuous work for more sustainable manufacturing has become a large part of the manufacturing companies? operations. It is also well known that the factory planning shapes the manufacturing process to a great extent. Consequently it is logical to assume that the manufacturing companies? factory planning process plays a major role in the work for increased sustainability.

Internet and social media have opened up new possibilities for companies and organisations tocommunicate their brand. It only takes a few seconds to communicate the message of a website to theuser. This indicates the importance of having the intended message of the website communicated clearlyin order to give the user a correct impression of the company or the organisation. When it comes to theconcept design of a website, it?s important that all different parts is presented uniformly.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

ABSTRACTHelena Nowachek The purpose of the following study is to focus upon the possibilities and challenges associated with the transference of corporate culture from one organization to another. I have chosen to address this by looking at the franchise company Jobzone, which works specifically with recruitment and outsourcing. As a method I have interviewed three people in Jobzone: one person who is responsible for education, one franchising boss in Sweden and one franchisee. To delineate the concept of culture I apply both Schein?s model, in which he divides culture into the three levels of artifacts, values and basic assumptions, as well as a general theory of communication.

Denna uppsats handlar om homosexuellas ?komma ut? process och hur samhällets normer påverkar denna. Vi ville ta reda på om och hur en ny identitet skapas när någon kommer ut som homosexuell och hur samhällets syn på normbrytare är samt hur normbrytarna upplever det.Denna studie är gjord med hjälp av kvalitativ metod, vi har intervjuat elva öppet homosexuella män och kvinnor för att få reda på deras upplevelser och känslor kring sin ?komma ut? process.I analysen kommer vi bland annat fram till, med hjälp av tre teorier: identitet, heteronormativitet och biografiska vändpunkter att ?komma ut? processen inte behöver vara en vändpunkt i alla homosexuellas liv..

The purpose of this article has been to elucidate social secretaries? and teachers? experiences of collaboration around children in need of society?s intervention. We wanted to examine what the difficulties could be, according to their experience, and how they handled them. Additionally our aim was to analyze whether their method of dealing with the obstacles were likely to succeed, viewed from the perspective of system theory. In order to achieve our purpose we used a qualitative method and interviewed four social secretaries and four teachers.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

The use of digital devices are widely spread among us. Children have an iPad in their hands before they learn how to talk and we bet you look at your smartphone more times a day then you would like to admit? Interaction through these devices have become so natural in our daily life that we get confused when a retailer does not offer a website or an app. The habit of searching for information in the most accessible channel and buying in the one that offers the benefit of convenience, and of course, saves you money and time, is a common way of shopping these days. This is referred to as multi-channel shopping.

Executive SummaryThis final thesis has examined the effects of an increased centralization and better coord­in­ation of the distribution logistics at ABB in Västerås. The company is today strongly decent­ralized and there is a minimum of collaboration between the 20 business units. This is why the questions were raised; how could the business units coordinate outbound logistic activities and what effects would that provide. The obj­ect­ive of this final thesis is to provide basic data for a future decision-making which desc­r­ibe these effects.The report has mapped out the factors that are important to ABB in an evaluation of their logistic activities and how the outbound logistics work today. The four factors are cost efficiency, delivery service, environmental impact and logistics capability.

The primary purpose of this study has been to investigate the Swedish timber industry?s perception of compression wood. A secondary aim has been to describe particular areas within the production process where compression wood is likely to cause problems. This study has mainly been carried out as a questionnaire. In order to connect the findings to current research, additional information has also been collected by means of a literature review. The questionnaire has been intended for sawmills and wood-manufacturing companies from various production classes and owner categories, as well as from different parts of the country.