This master thesis has been done in cooperation with Sweco Viak AB in Sundsvall. The aimwith the project is to investigate the purifying effect of percolation filter due to iron andmanganese. The overall goal was to investigate how the parameters surface load,sandfractions, and burden time affect the purifying effect. The expectation is to optimize thedesign and find a demouldning of the filter that gives sufficient purifying with a highersurface load. As an attempt to accelerate the curing of the filter, experiments with a layer ofsand which surface has been covered with manganese ore (MnO2) on top of the filter havebeen done.As test filters 10 L bars were used and the experimental work was performed at thewaterworks in Hassela and Munkbysjön.In Hassela different sandfractions were tested.

Tourism in the Arctic and Antarctic is increasing rapidly. In both Polar Regions, the cruise tourism is predominant. Several of the tour operators arrange trips under the banner of ecotourism, meaning that the trips should be ecologically sustainable. To ensure ecotourism standards there are different types of certifications; for cruise travels in the Arctic there is AECO (the Association of Arctic Expedition Cruise Operators) certification, and for travels to the Antarctic IAATO (the International Association of Antarctic Tour Operators). Promoters of ecotourism argue that these trips are important because they create support for conservation work among tourists making them ?polar ambassadors?.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

The purpose of this thesis is to analyze and identify a selected number of key factors in successfully implementing open innovation. More precisely, it looks at how value is maximized using open innovation practices. The scientific approach taken is based largely on the network perspective, which puts relations to other companies in focus. An extended view of the resource based view (RBV), different from the traditional one by taking also external resources into account, is in addition central to understanding the use of external resources to create internal value. The two main research questions strive to look at how the company locates relevant partners and what the relations that are established with these partners should look like to get the most of open innovation.

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

Automatic milking systems (AMS) have been in commercial use since 1992 and have since 1998 increased a lot. The objective of this study has been to examine the development of udder health on farms converting to AMS. The study also included a comparison of how udder health developed depending on how farms handled cows with mastitis. This was because farms choose to either milk cows with mastitis in a separate barn or in the milking robot. Other studies on udder health on commercial farms have shown that somatic cell count increases both among individual cows and in the bulk milk when converting to an AMS. No differences between before and after converting to AMS in the proportion of cows treated for mastitis can be found in the literature.

Climate change is expected to lead to increased rainfall and higher temperatures, among other things. This will have a major impact on our cities. Floods can lead to property damage as well as damages to human and animal health. Higher temperatures will increase the frequency of heat-related health risks and premature deaths. The consequences of climate change will be particularly large in our cities because of the city's morphology with a high amount of paved surfaces and buildings that affect the natural processes in areas such as drainage and absorption of solar radiation.

As competing organizations struggle to become more effective, one field stands out as one of the vital keys to success; internal communication. Even small errors in information handling can end up into obstacles that seem impossible to overcome. Managers constantly need to adjust the internal communication to fit variables that mirror the structure of the organization. This thesis is a study about how and in what magnitude structure affects organization?s internal communication.We have done qualitative interviews with McDonald?s and Diesel, two different global organizations within the branch of service business.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

SammanfattningFlygmarknaden är en marknad som på senare år har genomgått, och fortfarande genomgår, stora förändringar. Från att ha varit monopolistiskt och hårt reglerad har den successivt luckrats upp. Detta har lett till ökad konkurrens, större osäkerhet och minskad stabilitet. Förutsättningarna för ett flygbolag att kunna starta upp och bedriva sin verksamhet är hårda. För att kunna möta dessa svårigheter måste ett flygbolag lägga upp strategier som tar dessa i beaktande.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.