The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

A good flow of information in organizations is one of the key aspects of how we define a well-functioning organization. The information flow could be internal as well as external between actors within as well as outside of the organization. In a logistics organization this flow of information is equally important as in any other kind of organization. In this paper we have explored information flows in logistics organizations by applying, boundary spanning and the mobile-stationary divide perspective. In boundary spanning the main goal is to erase or relocate some of the boundaries within an organization, in our case to make the flow of information internally as well as externally better.

The present study is embedded in the research field of Personal Information Management (PIM) and its goal is to contribute to this research area by showing information management aspects in untraditional contexts, as in the social networking site Twitter. The aim and purpose of this two year's master thesis was to investigate the beha-viour of librarians within the context of Twitter. The objectives of this thesis focus on the query of the informa-tion management aspect of Twitter, and on the investigation into whether Twitter offers the possibility to reach a state of flow while using it, as well as inquiring into the relationship between Mihaly Csikszentmihalyis flow theory and PIM. The theoretical framework of this thesis is centred upon the flow theory and the conditions that are necessary to reach a state of flow. To fulfill the purpose of this thesis a directed content analysis is applied as an investigative method, where its in-depth research aspects will be applied upon the empirical material, which contains 429 tweets.

Det här arbetet handlar om flow och hur begreppet samverkar med olika aktiviteter i våra liv. Bakgrunden till flow förklaras inledningsvis i kapitlet om teoretisk bakgrund och sätts senare i relation till inre förändring, socialt samspel, fysisk aktivitet, kommunikation, samt pedagogik. Syftet med arbetet är att ge svar på hur flow kan användas i undervisning. Som metod för datainsamling har jag gjort en gruppintervju med fyra lärare aktiva vid Musikhögskolan i Malmö. Gruppintervjun fungerade som ett vardagligt samtal mellan fyra personer och resultatkapitlet är sammanställt i sex rubriker: Introduktion; Personernas uppfattning om flow; Vägar till flow och hinder på vägen; Gruppflow; Flow, kvalitet och kommunikation; samt flow och undervisning.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

Nanotechnology, one of the most interesting sciences today will no doubt have an enourmous impact on tomorrow's society and industry. One of the most interesting nanomaterial that has been discovered is the semiconductor quantum dot (QD). This material shows interesting novel properties such as a size-dependent band gap, which is an effect caused by the quantum confinement effect in all three dimensions. Due to this phenomenon the absorption spectrum can be tuned to the desired value by adjusting the size of the QD.This thesis aims to investigate how the solvent ratio of H2O/Ethanol affects the optical and structural properties of copper sulfide QDs manufactured in a chemical synthesis way using modern microwave heating. The process of manufacturing QDs using chemical synthesis often involve a capping-agent to prevent the QDs from agglomerate into bigger structures.

En modern grafikprocessor är oerhört kraftfull och har en prestanda som potentiellt sett är många gånger högre än för en modern mikroprocessor. I takt med att grafikprocessorn blivit alltmer programmerbar har det blivit möjligt att använda den för beräkningstunga tillämpningar utanför dess normala användningsområde. Inom det här arbetet utreds vilka möjligheter och begränsningar som uppstår vid användandet av grafikprocessorer för generell programmering. Arbetet inriktas främst mot signal- och bildbehandlingstillämpningar men mycket av principerna är tillämpliga även inom andra områden.Ett ramverk för bildbehandling implementeras och några algoritmer inom bildanalys realiseras och utvärderas, bland annat stereoseende och beräkning av optiskt flöde. Resultaten visar på att vissa tillämpningar kan uppvisa en avsevärd prestandaökning i en grafikprocessor jämfört med i en mikroprocessor men att andra tillämpningar kan vara ineffektiva eller mycket svåra att implementera..

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.

The goal of this study is to examine what five teacher?s impression of the teacher?s role is in their previous years. How important the ?joy at work? is in relation with the educational progress? And what aspects that contributes to the? joy at work? and what obstacles that stops them. The essay will also go through the concepts of a teacher role, with connection to the theoretical perspectives of Csikszentmihalyi?s Flow and Antonovsky?s Salutogenesis (KASAM).The method I used was interviewing five teachers and I used Larsen?s chapter of ?content analysis? as a basis, I also used Flow and KASAM as theoretical references in my analysis.

Syftet med detta arbete är att simulera ett värmesystem i COMSOL Multiphysics, Pipe Flow Module, Non-Isothermal Pipe Flow som innehåller ekvationer och randvillkor för att modellera inkompressibel strömning och värmeöverföring i rör.Data om processen och dess komponenter har samlats in från industrin där arbetet är utfört och i vissa fall modifierats för att bättre beskrivas i programmet.Utifrån insamlad data har en modell byggts upp och två simuleringar har gjorts. En stationär för starten av systemet, den har sedan legat till grund för en dynamisk som simulerar förloppet från start till normaldrift.Tiden det tar för det aktuella fallet att nå drifttemperatur är 16 timmar. En felströmning upptäcktes samt att en av pumparna inte kommer att klara en start från 20 °C..

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.

The company LightLift Esystems AB manufactures patented motorized lift systems for the illumination of halls with high ceilings. The company wants a new design for singular heavy lights in order to be more competitive.This project consists of the development of the new design under the requirements and specifications imposed by the company. The new design must support lights up to 300kg and keep the overall dimensions as low as possible without modifying the driving unit.This document contains all the designing steps followed to reach the final solution as well as the material selection, manufacturing process and assembly of all the parts that form it.The solution obtained shows to be very competitive with other alternative products, since this new design triples their maximum load capacity while the dimensions are very similar.In this context, the optical appearance was also very important to the company and so it was another main objective of this project. From an aesthetical point of view, the final solution proves to be very compact and versatile since it can either be hidden behind a false ceiling or covered by a plastic case that gives the design a very nice look.Finally, the solution achieved fulfils all the requirements and specification previously imposed. It is reliable, compact, cheap to manufacture, easy to assembly and it has a good optical appearance. .

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.

Hur kan svårighetsprogression användas i skapandet av Puzzlehunts med syfte att uppnå en ökad upplevd känsla av flow hos spelaren? Denna frågeställning behandlas i uppsatsen och problemet som måste lösas är hur man kan bygga upp en ackumulerad kunskap om något vars syfte är att hela tiden tvinga dig att hitta nya lösningar på problem. I mer traditionella spel kan upprepning lära spelaren hur spelmekaniken fungerar. I puzzlehunts kan upprepning av spelmekanik inte användas eftersom målet för varje pussel är att hitta mekaniken som löser problemet. Uppsatsen visar att man genom inlärning av hur man skall tänka för att hitta lösningarna till pusslen kan bygga upp en ackumulerad kunskap hos spelaren och därmed även ha en svårighetsprogression och öka upplevd nivå av flow hos spelaren..

Tidigare studier har visat att faktorerna KASAM, flow samt prestationsbehov har betydelse för hög upplevd arbetstillfredsställelse. I denna studie undersöks om dessa faktorer även är aktuella under svenska förhållanden. En enkätundersökning genomfördes på 137 anställda på tre olika företag för att mäta om de tre faktorerna kan predicera arbetstillfredsställelse. Resultatet visade att KASAM, och särskilt komponenten meningsfullhet, var en stark prediktor av arbets-tillfredsställelse. Även flow, och särskilt dimensionen inomboende arbetsmotivation, hade ett signifikant prediktionsvärde medan det visade sig att prestationsbehov inte predicerade arbetstillfredsställelse.